How to Fold Down the Rear Seats in a Volkswagen?

3 Answers
VanCorey
07/29/25 8:39am
Method to fold down the rear seats in a Volkswagen: There are switches to release the rear seats in a Volkswagen, one on the left and one on the right. When pulling them out, there is a slight springy sensation. It's important to first press down on the backrest before pulling them out. The seats can be folded down in a split ratio, allowing one seat to be folded individually while the other two can be folded together. The Volkswagen Lavida is positioned as a compact mid-range sedan, with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm. All currently available Volkswagen Lavida models are equipped with the EA211 engine, offering two displacement options: a 1.5L naturally aspirated engine and a 1.4L turbocharged engine.
Was this review help?
3
3
Share
StJuliana
08/12/25 6:16am
I recently drove a Volkswagen Golf, and folding down the rear seats was quite straightforward. Just locate the small lever at the shoulder position of the seatback, give it a gentle pull, and the seat folds forward, creating significantly more space—super practical. Many Volkswagen models like the Golf or Passat support a 60/40 split-folding feature, allowing you to operate either the left or right side independently without affecting passenger seating. Before operating, ensure no one is in the back seat and clear any clutter for smoother folding. If the lever gets stuck, don’t force it—check if the headrest isn’t adjusted lower or if the seatbelt is tangled. Regularly inspecting the adjuster can prevent aging and extend its lifespan. Once folded, it’s perfect for moving or road trips with bulky items; I’ve even transported a bicycle without issues. The design is thoughtful, though it may take some time to get familiar with, as lever positions might vary slightly across models. A few tries in a new car, and you’ll get the hang of it.
Was this review help?
10
0
Share
Expand All
DelCatherine
10/05/25 7:37am
As a long-time Volkswagen owner, I have plenty of experience with folding down rear seats. First, locate the release lever on the side of the seat, usually near the window, and pull it to fold the seat. For Volkswagen SUVs like the Tiguan or T-Cross, you may need to push down the seat cushion before pulling the backrest. Operate gently to avoid damaging the latches by sudden pulling. After folding, remember to secure large items with seat belts or cargo nets for driving safety. If stuck, it might be due to the child safety lock being engaged or an obstruction—simply deactivate the child lock and clear any blockages. It's advisable to lubricate the release mechanism every six months to maintain smooth operation and prevent rust. While the increased space after folding is convenient for daily cargo, avoid operating while driving to prevent distraction and maintain control.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What is the range of the domestically produced Model 3?

Tesla Model 3 range is: Standard Range Plus version - MIIT pure electric range of 480 kilometers; Long Range All-Wheel Drive version - MIIT pure electric range of 590 kilometers; Long Range Rear-Wheel Drive version - MIIT pure electric range of 664 kilometers; Performance High Performance All-Wheel Drive version - MIIT pure electric range of 595 kilometers. Advantages of Tesla Model 3: It belongs to the Model X series, with upgraded models, available in silver, black, and blue color options, providing a wide range of choices, enhancing driving comfort, upgrading the vehicle suspension system, upgrading rear seat configurations, most designs are new, featuring a new battery architecture and an all-new car structure. Tesla Model 3 features: It does not use an aluminum body, with the body reduced by 20% to offset the impact of increased weight on the range, making the car's range longer; the impractical falcon-wing doors are removed, reducing the push-back start time.
10
0
Share

Can Different Coolants Be Mixed?

Coolants should not be mixed. Two different coolant additives must never be used together, as different brands of coolants have varying chemical compositions. Mixing them can easily trigger chemical reactions, which may severely damage rubber seals, often leading to leaks at the water pump seal or welded joints. Precautions for Mixing Coolants: Always use the same brand of coolant. Different brands of coolants have distinct production formulas, and mixing them may cause chemical reactions between additives, rendering them ineffective. Coolant Replacement Cycle: For vehicles that operate for extended periods, such as taxis, high-quality coolants should generally be replaced annually. Vehicles with shorter operating hours can have their coolant replaced every two years or every 30,000 kilometers. To prevent excessive foaming, which reduces the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolants can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, replace it promptly and clean the system.
12
1
Share

What is the function of car turn signals?

The functions of car turn signals are: 1. To alert pedestrians or other vehicles that the car is about to turn; 2. On highways, to indicate the direction of overtaking or lane changing; 3. When flashing simultaneously, to indicate that the vehicle has an emergency situation, alerting other vehicles to pay attention. The method to turn off car turn signals is: manually switch the turn signal lever below the steering wheel to the middle position to turn them off. Scenarios for using turn signals are: 1. When turning: activate the right turn signal before turning right, and the left turn signal before turning left, while observing road conditions; 2. When changing lanes: activate the right turn signal before changing to the right lane, and the left turn signal when changing to the left lane, flashing for three seconds before changing lanes; 3. When overtaking: overtake from the left lane, activate the left turn signal before overtaking, and overtake only after ensuring safety; 4. When pulling over to park: turning left or right gives following vehicles time to prepare; 5. When starting from the roadside: activate the left turn signal when starting from a parked position on the right side of the road.
13
3
Share

What is the difference between direct injection and multi-point fuel injection?

Multi-point fuel injection electronically controls the injection of fuel into the intake manifold to mix with air, and the engine's intake stroke then draws the air-fuel mixture into the cylinder. Direct injection, on the other hand, moves the fuel injector from the intake manifold to inside the cylinder, so the amount of air-fuel mixture is not affected by the opening and closing of the intake valve but is directly determined by the computer for timing and quantity. The differences between multi-point fuel injection and direct injection are as follows: 1. Fuel quality: Direct injection has higher fuel quality requirements compared to multi-point fuel injection, with a compression ratio as high as 12. 2. Cost: Due to the more complex components of direct injection compared to multi-point fuel injection, the price is usually higher. In other words, for the same car, direct injection technology is more expensive than multi-point fuel injection technology. 3. Fuel consumption: Direct injection has significantly lower fuel consumption compared to multi-point fuel injection. 4. Power performance: Direct injection improves power and torque by 10% compared to a general engine of the same displacement. 5. Technical level: Multi-point fuel injection technology is more mature, while direct injection is a newer and more advanced fuel injection technology. 6. Maintenance: Multi-point fuel injection has a simpler structure, making it better in terms of maintenance, reliability, and upkeep compared to direct injection.
20
1
Share

How to Turn Off the Engine Auto Start-Stop?

Engine auto start-stop can be turned off by following these steps: 1. Press the auto start-stop button directly (a circular arrow containing the letter A), and the dashboard will indicate that the system is turned off. 2. If you want to use this function again, press the button to turn it back on. 3. When auto start-stop is activated, pressing the brake pedal slightly harder will shut off the engine, and releasing the brake will restart the engine, thereby saving fuel. Below are some drawbacks of auto start-stop: 1. Higher maintenance costs for the battery and starter: Frequent engine starts and stops can damage related components, such as the starter and battery. Although vehicles equipped with auto start-stop systems use reinforced starters and batteries, in practice, their failure rates are higher than those in regular vehicles without this system. 2. Poor user experience: Different models from various brands have different designs for the auto start-stop system. Some models have suboptimal start-stop logic, with inaccurate timing for activation, and sometimes the system fails to engage during prolonged stops. 3. Increased fuel consumption in traffic jams: If stuck in heavy traffic, the engine may remain off for extended periods, causing the combustion chamber temperature to drop. Unburned hydrocarbons and paraffin can form carbon deposits on the cylinder walls. Poor fuel quality can worsen this issue. Carbon deposits lead to higher fuel consumption and reduced engine power, counteracting the fuel-saving purpose of the auto start-stop feature and potentially increasing fuel consumption instead.
8
2
Share

What are the issues after modifying the GL8?

GL8 is a business vehicle under the Buick brand. The following are the issues that may arise after modifying the GL8: 1. Abnormal noises while driving, which are mainly caused by the following situations. (1) The middle aviation seats have factory defects, with poor stitching causing the seats to rub back and forth. Additionally, if the screws fixing the aviation seats are not tightened properly, the seats will wobble while driving. (2) The welcome footboard and wooden floor are not perfectly fitted, or the screws fixing the welcome footboard are too long and come into contact with the car body, which can also cause noises while driving. (3) Carelessness of the construction workers, leaving objects under the decorative panels or wooden floor, can also result in abnormal noises. (4) Unprofessional installation of the overhead nine-grid lights, without using sponge or foam padding at the fixing points, causing them to wobble and hit the roof beams. (5) The small table board on the back of the seat is not firmly fixed to the original car seat, which can also cause abnormal noises. 2. Instrument failures, airbag light on, and occasional failure to start the car. (1) Instrument failures and the airbag light being on may be due to the modification workers not reconnecting the plugs or loose plugs when restoring the seats. This situation is rare; generally, pressing the main and co-driver seats will turn off the airbag light. (2) If the car fails to start, check the induction module under the middle row. If there is a wooden floor, it should be taken out and placed under the seat, as the wooden floor can block the signal, preventing the key from sensing the car body. Another point is that if the plug behind the air conditioning controller on the middle row is not connected, the car will also fail to start.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.