How to Fold Down the Rear Seats in a Volkswagen?

1 Answers
OCecilia
07/29/25 1:25pm
Volkswagen rear seat folding method: There are release switches on both the left and right sides of Volkswagen rear seats. When pulling them out, you'll feel a slight spring resistance. It's important to first press down on the backrest before pulling the switch. The seats can be folded down in ratios - each of the three seats can be folded individually, or two can be folded together. Volkswagen is an automobile manufacturer headquartered in Wolfsburg, Germany, with brands including Audi and Volkswagen under its umbrella. Taking the Sagitar as an example, it's a model under FAW-Volkswagen. In terms of dimensions, this vehicle measures 4544mm in length, 1760mm in width, and 1461mm in height, with a wheelbase of 2578mm.
Was this review help?
6
4
Share
More Forum Discussions

Is the purchase tax calculated based on the manufacturer's suggested retail price or the actual purchase price?

The specific price of the purchase tax is not calculated based on the manufacturer's suggested retail price, but rather on the net purchase price of the vehicle (i.e., the price listed on the purchase invoice). Calculation for private vehicle tax rate: Taxable price = (Total payment made to the seller for the taxable vehicle + additional fees) × 10%, where the taxable price does not include value-added tax. Calculation for imported vehicle tax rate: Taxable price = (Customs duty-paid price + customs duty + consumption tax) × 10%. Basic regulations for vehicle purchase tax: The taxpayer for vehicle purchase tax is the unit or individual who acquires (including purchase, import, self-production, gift, award, or other means of acquisition for personal use) taxable vehicles. The scope of taxation includes cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles, with a tax rate of 10%. The formula for calculating the tax payable is: Tax payable = Taxable price × Tax rate.
10
4
Share

What does the 14t road sign mean?

The 14t road sign indicates that the road or bridge is designed to bear a load of 14 tons. Road signs are markers that indicate road conditions and serve as guideposts for travelers, typically in the form of poles with directional signs. In traffic terminology, 't' stands for the abbreviation of the English word 'ton,' meaning a unit of weight. If this sign is present, it signifies the maximum allowable total weight limit for vehicles passing through that section of the road or bridge. Road traffic signs are markers set up by the vast majority of countries to warn, prohibit, restrict, or guide road users. Originating from Europe, international road traffic signs aim to bridge the gap caused by differences in languages and scripts. The 'Road Traffic Signs and Markings' (GB5768) standard categorizes road traffic signs into two main types: primary signs and auxiliary signs. Primary signs: Warning signs: Signs that alert drivers and pedestrians to potential hazards ahead. Prohibition signs: Signs that prohibit or restrict certain traffic behaviors by vehicles or pedestrians. Directional signs: Signs that indicate the direction of travel for vehicles and pedestrians. Guide signs: Signs that provide information about road directions, locations, and distances. Tourist area signs: Signs that indicate the direction and distance to tourist attractions. Road construction safety signs: Signs that notify road users of construction zones. Auxiliary signs: Signs that are attached below primary signs to provide additional explanatory information.
16
1
Share

Is it harmful to roll back in D gear on an uphill slope?

Rolling back in D gear on an uphill slope will not cause any harm. For AT vehicles, rolling back in D gear simply results in greater stall speed of the torque converter. Correct gear shifting method for automatic transmission on uphill slopes: When driving uphill, automatic transmission vehicles should be shifted to the forward drive D gear position. Automatic transmission means the driver does not need to manually shift gears - the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. Reasons for stalling in D gear on uphill slopes: This occurs because the slope is too steep and the D gear transmission ratio is insufficient. In such cases, the gear should be shifted to 2nd or even 1st gear. These lower transmission ratios provide greater torque to overcome the vehicle's weight on steep slopes, maintaining engine speed and preventing stalling.
11
2
Share

Does a slight scratch on the wheel rim edge have any impact?

There will be some impact if the wheel rim edge is slightly scratched, but the impact is not significant. It is recommended to repair it. Methods for repairing the wheel rim: Carefully check whether the scratch extends to the inner side of the wheel rim. If it cannot be simply repaired, just use paint thinner to slowly wipe the surrounding bruised area and remove the dirt. If the scratch on the wheel is deep and the dirt next to the scratch is difficult to remove, then tools are needed—just a small toothpick can thoroughly clean it. Impact of wheel rim scratches: If the wheel rim is scratched on the surface and only the paint is chipped, it does not need to be replaced. Sometimes the scratched area is large and may look very severe, but it still does not need to be replaced because the performance is not affected—only the appearance is compromised.
15
1
Share

Why does the engine speed increase but the vehicle speed doesn't?

The reasons why the engine speed increases but the vehicle speed doesn't are as follows: Transmission slipping: Transmission slipping may be caused by issues with the hydraulic fluid level in the transmission. If the fluid level is too low or too high, it should be adjusted accordingly. After adjustment, check whether the transmission still exhibits slipping. If slipping persists, the quality of the hydraulic fluid should also be inspected. Clutch or brake wear: If the hydraulic fluid appears brownish-black or has a burnt smell, this phenomenon occurs because the friction plates of the clutch or brake have burnt. Additionally, based on the oil circuit pressure, corresponding inspections and repairs should be carried out on the oil pump or valve, and the transmission's sealing rings and gaskets should be replaced promptly.
11
3
Share

What are the reasons for the car air conditioner not cooling after prolonged use?

There are several reasons why a car air conditioner may stop cooling after prolonged use: Lack of refrigerant: Car air conditioners generally require refrigerant replenishment every 2 to 3 years, which is also a form of vehicle maintenance. In reality, even if the air conditioning system is tightly sealed, refrigerant can still escape, especially if there are minor leaks in the air conditioning pipes or condenser. Damaged air conditioning flap: The flap motor is usually located in the lower middle part of the instrument panel and serves as the main switch for the air conditioning vents. If it fails, it means the switch is broken, and even if the air conditioner can produce cold air, the cold air can only escape through gaps. Be cautious when this happens, as replacing the flap motor is a significant and costly repair. Dirty condenser: The main purpose of the car condenser is heat dissipation. During spring, substances like catkins and willow fluff can easily accumulate on the condenser, leading to engine overheating or poor air conditioning performance. Therefore, after spring, it is advisable for car owners to check if the radiator is clogged with such debris and clean it promptly to ensure normal air conditioning operation. Loose or aged belt: During routine maintenance, 4S shops often recommend replacing the belt after prolonged use. This is because an aged or loose belt can slip during vehicle operation, posing significant risks to both the car and its occupants. Regular inspection of the engine belt is essential.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.