How to Fold Down the Rear Seats in a Geely Emgrand?

1 Answers
VonMadeline
07/29/25 2:02pm
Method to fold down the rear seats in a Geely Emgrand: There are folding buttons installed on both sides of the rear seat backrest. Press these buttons to fold the seat backrest. The rear seats of this vehicle consist of a left rear seat and a right rear seat, featuring a 60/40 split-folding function, which can increase the trunk space for storing large items. After folding the seat backrest, ensure there is a gap between the rear seat headrest and the front seats. The Geely Emgrand (referred to as Emgrand) is a sub-brand under the Geely parent brand, with body dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm.
Was this review help?
14
1
Share
More Forum Discussions

How to Reset the Wrench Icon on the Dashboard?

The method to reset the wrench icon on the dashboard: 1. With the engine off, press and hold the trip meter reset button located below the tachometer; 2. Turn the ignition to the ON position, then release the trip meter reset button. The display will show the SERVICE indicator; 3. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display; 4. Turn off the engine to reset the reminder message; 5. Turn the ignition to the ON position again, and the SERVICE indicator will disappear. The wrench icon on the dashboard does not indicate a vehicle malfunction but serves as a reminder for scheduled maintenance. The wrench alert is a feature set by car manufacturers to remind owners to perform maintenance at specific mileage intervals. After maintenance, the reminder light must be reset following a specific procedure to turn it off.
5
2
Share

What does the vehicle ECO mode mean?

The ECO mode in vehicles refers to the economic driving mode function. ECO is an English abbreviation formed from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economic mode is activated. ECO mode is categorized into active and passive types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to enable it. When the driver presses the ECO mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button. When the dashboard ECO indicator light turns on, it serves merely as a reminder function. ECO automatically evaluates your driving behavior, and if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles employ the active ECO driving mode, meaning they have a dedicated switch button. Therefore, during daily driving, the ECO mode can generally be enabled. However, it is unnecessary to activate ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would fail to demonstrate the fuel-saving characteristics of ECO mode and could even affect the vehicle's power. Additionally, the ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing the ECO mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not function in such scenarios.
5
0
Share

Will the probation period of a driver's license be extended by one year if six points are deducted during the probation period?

C-class driver's license probation period will not be extended by one year if six points are deducted, but accumulating 12 points during the probation period will result in the cancellation of the probationary driving license type. For drivers holding A or B-class licenses, if they accumulate more than six points but fewer than 12 points during the one-year probation period, the probation period will be extended by one year. If they again accumulate more than six points but fewer than 12 points during the extended probation period, their probationary driving license type qualification will be revoked. The full name of a driver's license is a motor vehicle driver's license, also known as a 'driving license,' which is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills, and lacking such skills may lead to traffic accidents if driving is done recklessly. Generally, individuals without a license are not permitted to drive on the road.
5
4
Share

What is ECO Mode?

ECO is the economic driving mode of a car, also known as the economy mode. When the vehicle frequently operates in congested urban road conditions, activating the ECO mode can significantly improve fuel efficiency. Under ECO mode, the amount of carbon deposits in the engine is roughly the same as that produced under normal operating conditions. The main principle of ECO mode is not complicated. It involves a comprehensive judgment and analysis of factors that affect fuel consumption during vehicle movement, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine, effectively reducing fuel consumption compared to normal driving mode. Simply put, it controls the engine speed with appropriate gear shifts to minimize unnecessary fuel consumption. ECO is an abbreviation, with the Chinese translations being Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard illuminates, it means the vehicle's economy mode has been activated. ECO mode is categorized into active and passive types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to enable it. When the driver presses the ECO mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button. When the ECO indicator light on the dashboard illuminates, it serves merely as a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most vehicles use the active ECO driving mode, meaning they have a dedicated switch button. Therefore, ECO mode can be enabled during daily driving. However, it is unnecessary to activate ECO mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of ECO mode but also negatively impact power output. Additionally, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the system prioritizes speed, causing the ECO mode to deactivate automatically. During idle parking or when in N/P gear or manual mode, ECO mode may also become ineffective. When high torque output is required, such as during hill climbing, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and ECO mode will not function.
12
3
Share

Where is the start button of Volvo XC60?

Volvo XC60's start button is located on the right side of the steering wheel. First, press the vehicle's brake pedal, otherwise the vehicle cannot be started. Then, press the one-touch start button to start the vehicle's engine. After the vehicle is started, shift the gear to D and release the electronic parking brake to drive normally. Volvo XC60 is a mid-size SUV launched by Volvo Asia Pacific, with a length, width, and height of 4688mm, 1902mm, and 1658mm respectively, and a wheelbase of 2865mm. It is equipped with a 2.0T turbocharged engine with a maximum power of 140kw, matched with an 8-speed automatic transmission.
4
5
Share

What situations should be paid attention to when driving at night?

The situations to pay attention to when driving at night are: 1. Use lights reasonably. When driving at night, usually only the low beam is sufficient for lighting, and the high beam should only be used in special circumstances; 2. Reduce the number of lane changes and overtaking while maintaining a longer safe distance than during the day, and avoid driving while fatigued. On roads without streetlights, use the high beam only when it is truly difficult to see the road, and remember to switch back to the low beam when an oncoming vehicle approaches to prevent dazzling the other driver and causing an accident. Overtaking at night is very dangerous because reference points are not as clear as during the day, making it easy to misjudge distance and timing, leading to failed overtaking and potential side-swipe accidents, which can waste even more time.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.