···
Log in / Register

How to Fold Down the Rear Seats in a 2021 Volkswagen Lavida?

4 Answers
Lilah
07/23/25 11:09pm
Locate the switches under the headrests on both sides of the rear seats. Press the switch and push forward. The backrest can be folded down. Open the rear trunk, and under the seats, there are black straps. Pull them backward and lift the seats upward. Hook the straps onto the headrests of the front seats. The straps are adjustable for tightness.
Was this review help?
3
2
Share
OMariana
08/10/25 6:55pm
Operating the rear seat lift on the 2021 Volkswagen Lavida is actually quite simple. Let me walk you through the steps based on my experience. First, locate the rear seats inside the cabin. The backrest portion doesn't have any mechanisms—the key lies at the base of the seat. Crouch down and carefully inspect the front edge of the seat, near where your feet would rest. There's usually a concealed plastic pull loop or U-shaped clip here, often color-matched to the interior and easy to miss. Gently pull this loop and lift upward with moderate force until you hear a "click" releasing the latch, at which point the entire seat can be flipped upward. Important precautions: ensure the engine is off to prevent accidents, and avoid excessive opening angles to protect the hinges. The revealed space is quite spacious, ideal for bulky luggage or cleaning hard-to-reach areas—I once used it to transport skis conveniently. Avoid using excessive force during operation to prevent damaging plastic components. If unsure, refer to the illustrated owner's manual for clarity. Performing this regularly also helps inspect carpeting for stains.
Was this review help?
7
4
Share
Expand All
McPaige
09/23/25 7:22am
When lifting the rear seat, prioritize safety. My approach is to ensure the car is parked on a level surface with the parking brake firmly engaged. Squat down and locate a semi-circular handle at the front edge of the seat. Pull it with even force while lifting upward gently to avoid damaging the latch. The 2021 Lavida's design is user-friendly—once the latch releases, the seat lifts naturally, revealing the storage space below, ideal for cleaning accumulated dust or accessing the spare tire tool bag. I've noticed some owners struggle to reattach the seat due to improper force. In such cases, gently press the front edge of the seat to realign the latch. After operation, test its stability to prevent seat movement while driving. Additionally, in winter when plastics become brittle, handle with extra care. Regularly lifting seats during interior maintenance helps detect leaks or debris early, safeguarding vehicle safety.
Was this review help?
3
2
Share
Expand All
CharlieLynn
11/07/25 2:49am
Let me share the basic method to fold down the rear seats of the Lavida. There's a small handle under the front edge of the seat - just pull it up to lift the seat. Perform this action after the car is parked, and it's done in just two or three simple steps. If you're unsure about the handle's location, check the button area on the driver's side door or the seat gaps. Maintain steady movements when folding to avoid damage from rushing. Once completed, the expanded space can accommodate large backpacks or allow for interior dust cleaning. First-time users might find it unfamiliar, but you'll get the hang of it after a couple of tries.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What are the body dimensions of the Trumpchi M8?

The body dimensions of the Trumpchi M8 are 5089mm×1884mm×1822mm, with a wheelbase of 3000mm. Powertrain of the Trumpchi M8: The Trumpchi M8 adopts a "390T+8AT" combination, equipped with an all-new third-generation 390T direct-injection turbocharged engine. It incorporates globally synchronized technologies and configurations such as GDI direct injection technology, GCCS combustion control patented technology, a 350bar high-pressure direct injection system, a single-scroll twin-flow turbocharger, and an electronically controlled wastegate. The maximum power reaches 185kW, and the maximum torque reaches 390N·m. For the transmission, it features Aisin's renowned 8AT gearbox, which has a wider gear ratio range, improving fuel efficiency and power performance while effectively reducing jerks and bumps, ensuring smoother and more linear power delivery. It offers five driving modes. The Trumpchi M8 comes standard with hill-start assist, hill descent control, engine start-stop, and other assistance systems across all variants. The top-tier model is equipped with adaptive cruise control, lane departure warning, active safety systems, and a 360-degree panoramic imaging intelligent driving assistance system.
4
5
Share

What does the engine oil grade 5w-40 mean?

The engine oil grade 5w-40 means that W stands for WINTER, indicating it is suitable for winter use. The number 5 before W represents the viscosity at low temperatures. The smaller the number, the better the fluidity at low temperatures and the stronger the cold resistance. The number 40 refers to the viscosity at 100°C. The larger the number, the higher the viscosity and the stronger the high-temperature resistance. The specific introduction of engine oil grades for cars is as follows: 1. Winter oil grades: The winter oil grades are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol W stands for WINTER, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 2. All-season oil grades: The all-season oil grades are: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, 10W-30, 10W-40, 10W-50, 15W-20, 15W-30, 15W-40, 15W-50, 20W-20, 20W-30, 20W-40, 20W-50. The smaller the number representing the winter part, and the larger the number representing the summer part, the higher the viscosity and the wider the applicable temperature range.
11
4
Share

What to Do When the Car Makes a Squeaking Noise When the Air Conditioner is Turned On?

Solutions for the squeaking noise when the car's air conditioner is turned on are as follows: 1. Adjust the compressor's position bolt: The air conditioner pulley and belt may slip, producing a sharp friction noise during the process. Check if there is oil on the belt causing the slip, and clean it if necessary. If not, adjust the compressor's position bolt to tighten the belt, increasing friction. 2. Adjust the belt tension: If the noise is due to a loose belt, press the belt to check its tension. If it's too loose, tighten it. If the belt is worn out, replace it. 3. Replace the tensioner pulley: A damaged belt tensioner pulley can also cause noise, so it should be replaced. 4. Clean the blower and ventilation ducts: Foreign objects in the blower or ventilation ducts can also produce noise, so they should be cleaned.
12
1
Share

What is the Difference Between an Engine and a Transmission?

Transmissions and engines mainly have the following differences: 1. The transmission changes the gear ratio to expand the torque and speed of the drive wheels. 2. The engine is the power source of a car. Most car engines are thermal power devices, referred to as heat engines. Below are related introductions to transmissions and engines: 1. The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. Manual transmissions primarily consist of gears and shafts, achieving speed and torque changes through different gear combinations. 2. The car engine is the device that provides power to the car, serving as the heart of the vehicle. It determines the car's power, fuel efficiency, stability, and environmental friendliness.
12
1
Share

Which gear is M1?

M1 refers to the first gear in manual mode. It is commonly used when going up or down slopes, entering underground parking garages, in heavy traffic, or when following other vehicles. When shifted into M mode, the transmission switches to manual operation, requiring the driver to manually change gears. The gear shift lever will have symbols indicating plus and minus; pushing the lever toward the plus symbol shifts up one gear, while pushing it toward the minus symbol shifts down one gear. Common automatic transmission gear positions include P, N, R, D, L, S, and M, which stand for: P (Park), N (Neutral), R (Reverse), D (Drive), L (Low, also known as Hill Climb), S (Sport, also known as Sport Mode).
6
3
Share

How to Spray Windshield Washer Fluid in a Bora Car?

The method to spray windshield washer fluid in a Bora car is to pull the lever on the right side of the steering wheel upwards. It is important to note that in winter, the selection of windshield washer fluid should be based on its antifreeze performance. Choose a fluid with a freezing point at least 10 degrees Celsius below the local temperature to prevent the fluid from freezing and causing issues such as a malfunctioning washer pump. The Bora is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. It features a MacPherson independent front suspension and a torsion beam rear suspension. The car's dimensions are 4562 mm in length, 1793 mm in width, and 1468 mm in height, with a wheelbase of 2614 mm.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.