How to flatten the rear seats of the Roewe i5?

1 Answers
GrantLynn
07/30/25 1:03am
Method to flatten the rear seats of the Roewe i5: 1. First lift the seat cushion and move it forward; 2. Then recline the backrest. The Roewe i5 is a compact car produced by SAIC Roewe, with body dimensions of 4601mm in length, 1818mm in width, and 1489mm in height, a wheelbase of 2680mm, a fuel tank capacity of 45 liters, a minimum trunk capacity of 512 liters, and a curb weight of 1185kg. The Roewe i5 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 120hp, a maximum power of 88kW at 6000rpm, and a maximum torque of 150Nm at 4500rpm.
Was this review help?
1
1
Share
More Forum Discussions

Can I continue driving if the ESP warning light is on?

You can continue driving if the ESP warning light is on. The reasons for the light being on are: 1. Engine knocking; 2. Poor fuel quality, with carbon deposits accumulated inside the engine cylinders; 3. ESP system malfunction. The ESP consists of four components with the following functions: 1. Sensors for detecting the vehicle's state and the driver's operation; 2. The ECU section for estimating the vehicle's skid state and calculating the required rotational momentum and deceleration to restore to a safe state; 3. The actuator section for controlling the braking force of each wheel and the engine output power based on the calculation results; 4. The information section for alerting the driver about the vehicle's instability.
11
5
Share

What is the Difference Between Monocoque Body and Body-on-Frame?

The differences between monocoque body and body-on-frame are: 1. Different structures: In a monocoque body vehicle, all components are directly installed on the body; in a body-on-frame vehicle, components are installed on the chassis frame, and the body does not bear the vehicle components. 2. Different maintenance: Monocoque bodies are more complex to repair; body-on-frame vehicles make it easier to replace parts or perform maintenance. 3. Different collision behaviors: In a monocoque body, the front and rear frames collapse during a collision to absorb impact forces and protect occupants; due to the presence of the chassis frame, body-on-frame vehicles cannot collapse like monocoque bodies to absorb impact forces during a collision.
7
4
Share

What Causes the Fuel Pump to Automatically Shut Off When Refueling?

The reasons why the fuel pump automatically shuts off when refueling are: 1. High temperature causes increased air pressure inside the fuel tank, leading to the automatic shut-off of the fuel pump; 2. Fast refueling speed causes fuel splashing, resulting in the pump shutting off; 3. The fuel tank's pipe structure is too convoluted, causing fuel spray and pump shut-off. The fuel tank is the heart of a fuel-powered vehicle. Without it, the vehicle would be rendered useless. The fuel tank stores fuel and serves to dissipate heat, as well as separate bubbles and impurities from the fuel. Due to the auxiliary components installed inside, fuel tank maintenance is an essential part that car owners should not overlook. The fuel tank is designed on the right side to maintain the vehicle's front-rear balance, ensuring safer vehicle structure on complex and uneven roads.
10
3
Share

What is the tire model and specification of Wuling Rongguang?

The tire model and specification of Wuling Rongguang is 175/70r14, which means: 175 indicates the tire section width in mm, with tire widths ranging from 145 to 285mm in 10mm increments. 70 is the aspect ratio, representing the percentage ratio of the tire sidewall height to the tire section width, with 70 indicating 70%. Taking the 2019 Wuling Rongguang as an example, it is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 107ps, maximum torque of 145nm, maximum power of 79kw, maximum power speed of 5400rpm, and maximum torque speed ranging from 3600 to 4000rpm, paired with a 5-speed manual transmission.
16
1
Share

How to Clean Adhesive Residue from Car Windows?

Methods to clean adhesive residue from car windows: 1. Prepare a soft, clean cloth and apply a small amount of alcohol or acetone to it, then repeatedly wipe until the residue is completely removed; 2. Use a heat gun to warm the adhesive on the window film. Once heated, the adhesive's stickiness will decrease, allowing you to wipe it off with a soft, clean cloth using some force; 3. Use nail polish remover to treat the adhesive on the window film. Types of car glass include: tempered glass, laminated glass, bulletproof glass, safety glass, and zone-tempered glass. Functions of car glass: 1. To provide the driver with a timely understanding of external conditions, thereby expanding the driver's field of vision; 2. To serve as a barrier against wind and rain.
20
0
Share

Can I add antifreeze with different colors to my car?

You cannot add antifreeze with different colors to your car. Antifreeze, also known as coolant, is designed to prevent the cooling liquid from freezing in cold winter conditions, which could otherwise cause the radiator to crack or damage the engine cylinder block or head due to expansion. Functions of antifreeze: 1. Provides anti-corrosion protection for components of the cooling system; 2. Prevents scale formation, avoiding reduced radiator efficiency; 3. Ensures the engine operates within the normal temperature range. A lack of antifreeze will directly affect the radiator's cooling performance. When the water temperature is too high, the red water temperature warning light on the dashboard will illuminate. If you continue driving without turning off the engine, it may lead to engine seizure and damage.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.