How to Flatten the Rear Seats in the GS4?
2 Answers
Here are the steps to flatten the rear seats in the Trumpchi GS4: 1. Locate the release handle in the middle of the backrest. 2. Pull the handle outward to flatten the seat. Below is additional information about the Trumpchi GS4: 1. The Trumpchi GS4 measures 4545mm in length, 1856mm in width, and 1668mm in height. 2. It has a wheelbase of 2680mm, a minimum ground clearance of 190mm, and a fuel tank capacity of 50 liters. 3. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW and a maximum torque of 265 Nm, paired with a 6-speed manual transmission.
I've tinkered with my GS4 quite a few times, and leveling the rear seats actually has some tricks. First, locate the release handle above the seatback, usually near the shoulder area, and pull it upward firmly to unlock the backrest. Make sure to lower the headrest to its lowest position first, otherwise it might get stuck. When folding the seatback, you need to push it forward with some force—it took me several attempts to get the right amount of pressure. The release handles for the left and right seats might be on different sides, with the left seat's handle on the left and the right seat's on the right. Once fully flattened, there's a small step between the trunk floor and the seats, which I later solved by buying a specialized filler panel at an auto parts store. The leveled space is really practical—I even managed to fit a washing machine during my last move. Just remember, when putting the seats back up, you should hear the locking latch click into place to ensure they're properly secured.
