How to Fix Water Leakage in Old Lavida Doors?

Where is the horn fuse located in the Venucia R50?

The horn fuse of the Venucia R50 is located in the black box at the upper right corner of the engine compartment. Common reasons for fuse burnout: 1. Washing the engine compartment with water. When cleaning the engine compartment, since the fuse box is not perfectly sealed, avoid direct water contact as it can cause a short circuit, leading to failure of the vehicle's electrical components. Most fuse boxes have clear icons prohibiting water washing. If the fuse box is dirty, gently wipe it with a damp cloth. 2. Installing high-power headlights. After modifying the headlights, the increased power can easily blow the fuse. It's advisable to replace it with a higher-current fuse and upgrade the power cables to prevent overheating due to excessive current. 3. Using high-power devices like cigarette lighters. The cigarette lighter fuse is particularly prone to blowing. Typically, cigarette lighters use 15-25A fuses. Given the vehicle's 12V voltage, it's recommended not to connect devices exceeding 300W (or 200W for some compact cars). 4. Installing high-power audio systems. High-power audio can also blow fuses. When adding high-power electrical devices, always consider the current requirements and replace the fuse accordingly.

2

4

Share

Which consumes more fuel, 1.6T or 2.0L?

It depends on the road conditions. When driving in urban areas, the 2.0L engine consumes slightly more fuel than the 1.6T engine. However, on highways, the difference in fuel consumption between the two is minimal. In city traffic jams, smaller-displacement turbocharged models tend to be more fuel-efficient than naturally aspirated ones. But when maintaining the same power output on highways, without considering other external factors, their fuel consumption is similar. Turbocharged engines save fuel to some extent because they reduce pumping losses, allowing for direct air intake. Simply put, they minimize the power wasted during the cylinder's downward stroke when drawing in air. The maximum power and torque of a 2.0L naturally aspirated engine are comparable to those of a 1.6T turbocharged engine. The 2.0L naturally aspirated engine offers smoother acceleration without the abruptness of turbocharging and generally has quicker initial acceleration than a 1.6T. However, on highways, turbocharged engines still deliver better power. The 2.0L naturally aspirated engine outperforms the 1.6T and 2.0T in terms of control, fuel efficiency, and failure rate, with lower repair and maintenance costs.

9

2

Share

How to Deal with Low Air Pressure in Euro Truck Simulator 2?

If the air pressure is too low in Euro Truck Simulator 2, you can turn off the air brake mode in the settings, or wait for a while for the air pressure to recover. Information about Euro Truck Simulator 2: 1. Introduction: Euro Truck Simulator 2, also known as ETS2, is a game that simulates the truck driving process. In the game, players need to drive trucks to complete cargo transportation tasks and can purchase more trucks. 2. Most Popular Truck Series: Many people have learned about various European truck brands through Euro Truck Simulator 2, with Mercedes-Benz being the most popular. Mercedes-Benz is the most sought-after brand among players in ETS2. While driving a Mercedes-Benz truck may be difficult in reality, it is not a problem in Euro Truck Simulator 2.

11

1

Share

What is the cylinder firing order of the Mercedes-Benz 272 engine?

When facing the engine, the cylinder firing order of the Mercedes-Benz 272 engine is as follows: on the left side from front to back are cylinders 1, 2, and 3, while on the right side are cylinders 4, 5, and 6. Here is some relevant information about the Mercedes-Benz 272 engine: 1. Design: The Mercedes-Benz 272 engine features a balance shaft installed between the two cylinder banks to counteract the inherent secondary vibrations of a V6 engine, ensuring smooth operation. This balance shaft is driven by the timing chain and rotates at the same speed as the crankshaft but in the opposite direction. The engine uses trapezoidal forged steel connecting rods, which reduce weight by 20%. The piston pin lubrication is achieved by injecting oil from the top of the piston rather than through separate holes in the connecting rods for splash lubrication. Oil jets are installed in the oil passages to cool the pistons. 2. Materials: The cylinder heads and crankcase of the Mercedes-Benz 272 engine are both made of aluminum.

9

3

Share

What Taxes Are Paid When Buying a Car?

Taxes to be paid when buying a car include consumption tax, value-added tax, purchase tax, and vehicle and vessel tax. Here is a partial introduction to the taxes paid when buying a car: 1. Consumption Tax: The purchase tax often mentioned when buying a car is actually an extra-price tax, while in reality, automobile manufacturers also have to pay taxes when producing cars, including the consumption tax, which is an intra-price tax. The automobile consumption tax is a new tax category established during the national tax system reform in 1994 and was included in the "Provisional Regulations of the People's Republic of China on Consumption Tax" implemented on January 1, 1994. For passenger cars, three tax rates are set based on different vehicle types and engine displacements, and this tax is levied on manufacturers. 2. Value-Added Tax: The current value-added tax system is based on the "Provisional Regulations of the People's Republic of China on Value-Added Tax" (State Council Order No. 134) promulgated by the State Council on December 13, 1993. Value-added tax refers to a turnover tax levied based on the value-added amount generated during the circulation of goods (including taxable services). Selling goods or providing processing, repair, and replacement services, as well as importing goods and providing tangible movable property leasing services, are subject to a 17% tax rate, which applies to automobile sales.

1

5

Share

How to Check the Vehicle Emission Standard (National Standard Level)?

There are generally four methods. First: Check the back of the vehicle's environmental protection compliance label, which indicates the emission standard. Second: Refer to the vehicle's conformity certificate. Third: Determine based on the production date. Fourth: Visit the local vehicle management office for inquiry. Related information: 1. Vehicle Emission Standard: Vehicle emission standards regulate the allowable levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). Starting from January 1, 2004, Beijing upgraded its vehicle emission standards from Euro I to Euro II, and by 2008, officially implemented the Euro III standard. 2. Chinese Standards: Compared to advanced foreign countries, China's vehicle emission regulations started later and were initially less stringent. Based on China's actual conditions, a phased implementation approach was adopted from the early 1980s, prioritizing easier measures first. The implementation has mainly progressed through three stages to date.

9

5

Share

How to Fix Water Leakage in Old Lavida Doors?

Where is the horn fuse located in the Venucia R50?

Which consumes more fuel, 1.6T or 2.0L?

How to Deal with Low Air Pressure in Euro Truck Simulator 2?

What is the cylinder firing order of the Mercedes-Benz 272 engine?

What Taxes Are Paid When Buying a Car?

How to Check the Vehicle Emission Standard (National Standard Level)?

Can You Charge Your Phone When the Car is Turned Off?

What to do if the windshield is hit by a small stone mark?

What does 1.6L mean?

What does 1.8L mean?