How to Fix the Uneven Rear Seats in the Boyue?

1 Answers
EliasFitz
07/25/25 3:08pm
The rear seats of the Boyue cannot be laid completely flat due to their design, which includes a certain angle to provide better leg support. Taking the Boyue 2021 model as an example, its body dimensions are: length 4519mm, width 1831mm, height 1694mm, with a wheelbase of 2670mm, a fuel tank capacity of 58 liters, and a curb weight of 1575kg. The Boyue 2021 is equipped with a 1.8T turbocharged engine, delivering a maximum power of 120kW and a maximum torque of 250Nm, paired with a 6-speed manual transmission. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
Was this review help?
10
0
Share
More Forum Discussions

How to choose between V-KOOL K35 and K15?

The difference between V-KOOL K35 and K15 lies in the shade of color. If you prefer a darker tint, you can choose K15; if you prefer a lighter tint, you can choose K35. Here is some information about V-KOOL: 1. V-KOOL Brand Story: In the 1970s, to alleviate the global oil crisis, engineers at the Massachusetts Institute of Technology developed a revolutionary technology that resolved the conflict between light and heat, marking the beginning of the V-KOOL story. With the dedication of a group of visionary, passionate, and exceptionally talented scientists, the first V-KOOL product, VK70, was officially launched in 1993, transforming the industry landscape and remaining unparalleled to this day. 2. Brand Introduction: Eastman Chemical is a globally leading specialty chemicals company and a top manufacturer of window films. Its products are widely used in various aspects of daily life. Headquartered in Kingsport, Tennessee, USA, it is a New York Stock Exchange-listed company and ranks among the Fortune 500. With approximately 13,500 employees and 42 manufacturing bases worldwide, its business spans nearly 100 countries. Committed to environmental protection, social responsibility, and economic development, it won the 2012 ENERGY STAR Award from the U.S. Environmental Protection Agency.
7
2
Share

Do Automatic Cars Require Clutch Pedal Engagement?

Automatic transmission vehicles do not require clutch pedal engagement. There is no clutch pedal in automatic cars, as gear shifts are entirely controlled by the onboard computer. An automatic transmission eliminates the need for manual gear shifting by the driver. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions, replacing human judgment in shift timing and operation. Typical automatic transmissions feature P, R, N, D, 3, 2, and 1 gear positions: P stands for Parking, R for Reverse, N for Neutral, and D for Drive. Driving procedure for automatic vehicles: Sit in the driver's seat and adjust the seating position. Depress the brake pedal and start the vehicle using the ignition key. After startup, gently press the accelerator pedal twice to allow the vehicle systems to complete their self-check cycle. Maintain brake pedal pressure, then shift the gear selector to R position. Adjust the rearview camera to prevent collisions with rear obstacles. Release the parking brake, grip the steering wheel firmly, and gradually release the brake pedal to initiate movement. When encountering steep inclines, shift to L position (Low gear) to enhance powertrain performance. Subsequently, control the steering wheel and apply gentle pressure to the accelerator pedal to achieve acceleration.
13
5
Share

What is the parking sequence for an automatic transmission car?

Automatic transmission car parking sequence is to step on the brake, shift gears, and pull the handbrake. Below are the detailed parking sequences for automatic transmission cars and the parking methods for keyless series automatic transmission cars: Detailed parking sequence for automatic transmission cars: First, step on the foot brake to stop the car, then shift the gear from D to N, and pull the handbrake tight. Release the foot brake, but do not turn off the power, then step on the foot brake again, shift the gear from N to P, release the foot brake, and turn off the power. Parking method for key series automatic transmission cars: First, step on the foot brake to stop the car, shift the gear from D to N. Then pull the handbrake tight and turn off the engine. Release the foot brake, but do not turn off the power, step on the foot brake again, shift the gear from N to P, release the foot brake, turn the key back, turn off the power, and pull out the key. Parking method for keyless series automatic transmission cars: Without stepping on the foot brake, press the start button twice to let the car's computer system begin self-checking for at least 6 seconds. Step on the foot brake and press the start-stop button to ignite.
15
1
Share

What to Do When Unable to Contact the Owner of a Car Parked at the Entrance?

If you can't contact the owner of a car parked at the entrance, you can call 114. Here are detailed methods to contact the car owner: 1. Call 114: If the vehicle is legally driven, it is usually registered. You can then call 114, provide the specific location, color, model, and license plate number of the vehicle. At this point, 114 will directly transfer the call to the owner's phone, allowing you to communicate with the owner directly to request moving the car. 2. Call 122 or 110: 122 is a dedicated traffic hotline. You can report the vehicle's license plate number, model, color, and parking location to the traffic department, which will then notify the owner to move the car after investigation. If the obstructing vehicle is parked in an unauthorized parking spot and is uncooperative, the traffic department may directly tow the car away. 3. Call the insurance company's customer service: If the above two methods still fail to contact the owner, you can try to find out which insurance company the car's insurance was purchased from. Then, call the customer service of this insurance company and mention some issues related to insurance claims.
8
3
Share

What is the electronic tag of ETC?

ETC electronic tag refers to the OBU device, which is commonly known as the ETC device. The OBU device is mostly installed on the windshield of motor vehicles and communicates with the roadside unit (RSU) at highway toll stations via microwave heating. When the vehicle approaches the gear lever, the RSU detects the signal from the OBU and automatically opens the gear lever, achieving the effect of automatic control system driving. ETC installation process: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly light up. The OLED screen will display "Tag Invalid" and "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and stick it to the installation position. Press it with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the front glass, ensuring the chip is inserted into the OBU device.
15
5
Share

Will Pouring Water into the Exhaust Pipe Damage the Car?

Pouring water into the exhaust pipe will not damage the car. However, water entering the exhaust pipe can cause blockages, leading to poor exhaust flow and potential engine stalling. The following are methods for maintaining the exhaust pipe: 1. Regularly inspect the exhaust pipe: Generally, a comprehensive inspection of the exhaust pipe can be costly, so it's advisable to visit a regular repair shop for an initial check. The main purpose is to identify any damage to the exhaust pipe. If any cracks are found, immediate repairs are necessary to avoid affecting normal vehicle operation. 2. Prevent the muffler from rusting: Since the muffler is located in the middle of the exhaust system, any issues with it can affect the entire exhaust system. The primary preventive measure is to avoid water entering the muffler. During rainy days or when washing the car, be cautious to prevent water from entering the muffler. If water accidentally enters, start the engine and let it idle for about 10 minutes to expel the accumulated water. 3. Prevent exhaust pipe leaks: When installing the muffler, ensure it is properly and securely installed to avoid leaks. A leaking muffler can cause excessively loud exhaust noises and yellowing at the muffler's joints. Additionally, avoid driving at low gears with heavy loads, as this can cause varying degrees of damage to both the engine and the muffler.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.