···
Log in / Register

How to fix the T-Box failure in Haval?

4 Answers
EmmaLynn
09/03/25 3:29am
This failure is likely an intermittent issue, which can generally be categorized into the following aspects: abnormal noise, oil leakage, and rust. Haval vehicles have a T-Box failure warning, and it is necessary to visit a 4S dealership to check the fault codes in order to confirm the failure information.
Was this review help?
16
4
Share
NaomiMarie
09/15/25 5:12am
With over 20 years of auto repair experience, common causes of Haval T-BOX failures include software crashes or antenna module damage. First, try restarting the vehicle—it's as simple and effective as rebooting a frozen phone. If restarting doesn't work, check for vehicle system updates or inspect the fuses to avoid minor issues causing remote function failures. Never attempt DIY hardware repairs by disconnecting wires—electrical circuits are complex. Visiting a Haval 4S store for professional diagnostic tools is the easiest solution; they may refresh the software or replace components to restore navigation and positioning. For prevention, during regular maintenance, guard against moisture and vibrations. The T-BOX, located under the dashboard, is easily overlooked, but regular maintenance can significantly reduce failure rates.
Was this review help?
14
0
Share
Expand All
JudahRose
10/29/25 5:52am
As a Haval owner, I encountered a T-BOX malfunction last year that prevented remote vehicle start. Following the manual's advice, I restarted the system several times, but with little improvement, so I took it to the 4S shop. The technician mentioned a software bug requiring an update, and after a few hours of work, the issue was resolved. The entire process didn't cost much, but it taught me the importance of timely repairs, as such faults can interfere with anti-theft functions. If the hardware were damaged, it would be more troublesome, requiring replacement of the antenna or other components. I recommend not attempting DIY fixes and instead visiting an authorized repair center for a quick solution—it saves hassle and ensures a safe driving experience. Also, be mindful to avoid water exposure inside the car, as T-BOX units are not moisture-resistant.
Was this review help?
6
1
Share
Expand All
LaJustin
12/12/25 6:02am
As a car networking enthusiast, I recommend simple DIY for fixing Haval T-BOX issues. First, try checking the infotainment system's update options or restarting the vehicle engine to observe changes. Ensure stable onboard signal, as weak network can cause connection failures. User manuals often provide reset instructions, but avoid touching hardware to prevent new problems. Online forums offer shared experiences like software refresh methods. However, persistent issues require consulting Haval customer service for accurate diagnosis on whether professional handling is needed, while also reminding to protect components from impacts.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Corolla's Fuel Consumption with Air Conditioning in Summer?

Corolla's fuel consumption with air conditioning in summer is 9.69 liters per 100 kilometers. Below is a detailed introduction about it: 1. Introduction 1: Equipped with a 1.2T turbocharged engine, among its peers, as a Japanese model, its fuel economy is decent. 2. Introduction 2: Manual transmission models with air conditioning indeed have a more significant impact on fuel consumption when the air conditioning is turned on, while automatic transmission models with air conditioning are relatively more fuel-efficient. 3. Introduction 3: The temperature setting does not affect fuel consumption, but the fan speed is key, depending on the engine's speed regulation type, which may be related to fuel consumption.
19
2
Share

What are the features of BMW xDrive?

xDrive refers to BMW's intelligent all-wheel drive system, which can quickly change the torque distribution between the front and rear axles while driving, providing the driver with more stable driving performance. Here are some relevant details: 1. Example: During driving, if the car experiences understeer where the front wheels are pulled towards the outside of the curve, the intelligent all-wheel drive system will reduce the torque distributed to the front axle and then transfer the car's power to the rear axle. 2. Specific function: The intelligent all-wheel drive system can work in conjunction with the dynamic stability system to identify wheel slippage. When the car experiences slippage, xDrive's diaphragm clutch is locked by the motor, and the motor transmits appropriate power to the wheel with the best grip. Meanwhile, the slipping wheel is controlled by the braking system to ensure the car's stability.
15
0
Share

Does changing to AT tires affect an SUV?

Changing to AT tires does affect an SUV, with noticeable impacts such as increased fuel consumption, longer braking distance, and significantly slower acceleration. Additional details are as follows: 1. Noticeable increase in fuel consumption: Each AT100 tire is approximately 5kg heavier than a city tire of the same size, leading to a significant rise in fuel consumption. 2. Longer braking distance: Initially, drivers may find it hard to adapt, feeling that the vehicle doesn't brake as effectively as before, requiring deeper pedal pressure. The primary reason is the increased tire weight, which raises the rotational inertia of the tires. 3. Significantly slower acceleration: The substantial increase in tire weight adds to the axle load, weakening the vehicle's acceleration capability and making acceleration noticeably slower.
2
2
Share

What Causes Coolant Leakage at Pipe Joints?

Coolant leakage at pipe joints is generally caused by the liquid being overfilled or the water temperature being too high. Below is relevant information about automotive coolant: 1. Function: To dissipate heat from the engine. Without coolant, the car's engine and radiator lack protection, which affects the heat dissipation efficiency of the radiator. The engine temperature will continue to rise without effective cooling, and the coolant cannot circulate properly. Continuing to drive under such conditions may severely damage the engine. 2. Weather factors: In cold climates, it can also cause the engine or radiator to freeze, leading to engine failure and rendering the vehicle inoperable. 3. Lack of water preventing circulation: The cooling system circulates coolant via the water pump to carry heat away from the engine. A lack of coolant will prevent this circulation and heat dissipation, damaging the engine.
6
5
Share

What are the symptoms of a bad release bearing?

Symptoms of a bad release bearing: 1. Normal sound in neutral gear, but a rustling noise when pressing the clutch; 2. A hissing sound similar to metal friction when driving with gears engaged. Daily maintenance for the release bearing includes: 1. Follow operating procedures to avoid the clutch being in a semi-engaged or semi-disengaged state, and reduce the frequency of clutch usage; 2. Regularly or during inspection and maintenance, remove the release bearing to clean out impurities and soak it in lubricating oil using the boiling method to ensure sufficient lubrication. The release bearing generally refers to the clutch release bearing in a car, which is a relatively important component in the vehicle.
18
0
Share

Does the Civic Sport Edition have one-touch power windows?

The Civic Sport Edition is equipped with one-touch power window functionality. However, this feature needs to be activated at an authorized dealership, which requires signing a liability waiver (as one-touch operation carries certain risks). To use this feature, simply press and hold the lock or unlock button on the remote key. Additional information is provided below: 1. Definition: One-touch power window refers to when the vehicle's computer detects that the window switch has been engaged (lifted and immediately released) for less than a preset duration, it will send a continuous command to the window motor to raise the window until fully closed. If the window switch is lifted or pressed again during this process, the window movement will stop. 2. Functionality: If the window switch is continuously held upward for longer than the preset one-touch duration, the window will continue to rise, but will stop immediately upon releasing the switch. 3. Anti-pinch feature: One-touch power windows must be used in conjunction with an anti-pinch mechanism, otherwise there's a high risk of injury as the motor's lifting force is substantial. This is why many vehicle models offer one-touch down but not one-touch up functionality. The anti-pinch system includes additional motor current monitoring and control circuits that detect when current exceeds a safe range (indicating obstacle interference causing motor overload) and stops the motor accordingly.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.