How to Fix the Issue When the Infotainment System Won't Start and Only Shows the Car Logo?

What is the maximum speed of the Enjoyment?

The maximum speed of the Enjoyment is approximately 120 to 130 kilometers per hour. In terms of power, all models of this car are equipped with a 1.0T turbocharged engine, which delivers a maximum power of 90 kilowatts and a maximum torque of 173 Newton-meters. For the transmission system, the engine is paired with either a 6-speed manual transmission or a CVT continuously variable transmission. The Enjoyment adopts an ACE load-bearing body structure, utilizing high-heat press welding technology and high-strength steel materials, and is equipped with the Honda SENSING safety system. The Enjoyment's body dimensions are 4756mm in length, 1804mm in width, and 1509mm in height, with a wheelbase of 2730mm, providing a spacious driving and riding space. It features rear air conditioning vents, a 12V power outlet, and dual USB ports. Additionally, there is a hidden storage channel behind the central armrest, which connects directly to the trunk when opened.

8

5

Share

How to Adjust the Dashboard Clock on a Wrangler?

The method to adjust the dashboard clock on a Wrangler is: 1. Start the vehicle; 2. Press and hold the clock adjustment button on the right side of the dashboard, and the hour digits will start blinking; 3. Briefly press the clock adjustment button to adjust the hour digits; 4. After accurately setting the hour, release the clock adjustment button, and the minute digits will start blinking after a few seconds; 5. Briefly press the clock adjustment button to adjust the minutes. The Wrangler's body dimensions are: length 4334mm, width 1894mm, height 1839mm, with a fuel tank capacity of 70 liters and a curb weight of 1843kg. The Wrangler is equipped with a 2.0L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 266ps, maximum power of 195.4kW, and maximum torque of 400Nm.

16

2

Share

Should the Honda Haoying Use 92 or 95 Gasoline?

According to the official vehicle manual recommendation, the Honda Haoying should use 92-octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, you can also find this information on the fuel tank cap, which will also indicate the recommended grade. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the use of some new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane gasoline. This is because, in addition to the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane value and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the Honda Haoying occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-octane gasoline, using higher-octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher-octane gasoline, using lower-octane gasoline can cause engine knocking. Because the octane value is too low, the reduced ignition point may cause premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance will arise during the upward stroke. This resistance can make the engine run very unstably. If the knocking is imperceptible, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

5

0

Share

What are the differences between 5w30 and 10w40?

The differences between 5w30 and 10w40 lie in viscosity, minimum temperature tolerance, performance, and vehicle applicability as follows: Different viscosity: 10W40 engine oil has higher viscosity, while 5W30 has relatively lower viscosity. Different minimum temperature tolerance: 5W30 oil can adapt to lower temperatures than 10W40. The "W" stands for winter, and the number before it indicates the lower environmental temperature it can withstand. The smaller this number, the better the engine protection during cold starts. Different vehicle applicability: Higher viscosity oils (with larger numbers) may be more suitable for high-speed driving or heavy-load vehicles. For older vehicles, using 10W-40 oil may result in slightly louder engine noise compared to 5W-30. Different performance: Compared to 10w40, 5w30 performs better during cold starts due to its lower viscosity, resulting in quieter operation. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For 5W-30, the first number indicates low-temperature fluidity - 5W means it can withstand -30°C (the smaller this number, the better the low-temperature fluidity: 0W is -35℃; 5W is -30℃; 10W is -25℃; 15W is -20℃; 20W is -15℃; 25W is -10℃). Better low-temperature fluidity means smoother cold starts and better engine protection. The second number represents the oil's kinematic viscosity at 100°C - higher numbers indicate better ability to maintain viscosity at high temperatures, which can be understood as better lubrication performance under high-temperature conditions. Engine oil viscosity should not be too high or too low. If the viscosity is too low, it will increase engine wear. If the viscosity is too high, it will increase engine resistance during operation, leading to reduced power and increased fuel consumption. When the engine is running, the oil forms a film on the surface of various components, reducing friction between them and lowering operating resistance. If the oil viscosity is too low, it cannot form a stable oil film, which will accelerate engine wear. For full synthetic oil, the recommended replacement interval is one year or 10,000 kilometers. For semi-synthetic oil, the replacement interval is slightly shorter, requiring replacement every 7,000 kilometers or six months. When choosing engine oil, there are the following considerations:

2

1

Share

When Can I Schedule the Subject 3 Driving Test?

Generally, you can schedule the Subject 3 driving test 10-20 days after passing the Subject 2 test. However, the exact scheduling time depends on the local number of test-takers and the regulations of the vehicle management office. According to Article 47 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' each subject can be tested once, and if you fail, you can retake it once. If you do not attend the retest or fail the retest, the current test session will be terminated, and the applicant must reschedule the test. However, Subject 2 and Subject 3 tests must be rescheduled at least 10 days later. If you fail the Subject 3 safe and civilized driving knowledge test, the passing score for the road driving skills test remains valid. Within the validity period of the driving study certificate, the number of scheduling attempts for Subject 2 and Subject 3 road driving skills tests must not exceed five times each. If you fail the fifth attempt, the passing scores of other subjects will be invalidated. Subject 3 includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driving license assessment and is the abbreviated name for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's exam. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive. Subject 3 Scheduling Tips: Schedule as early as possible within the system's available time slots for students. Avoid peak scheduling times, meaning do not choose test sessions marked as crowded. Prioritize scheduling test sessions with higher rankings. For Subject 3 test scheduling, whether successful or not, you will be notified via SMS. Generally, the system will send an SMS notification to the test-taker after announcing the results. If you do not receive an immediate notification, you will receive the SMS at least 5-10 days before the test date. If you cannot attend the test due to personal reasons, you must cancel at least one day in advance. Otherwise, an absence will be treated as a fail, and you will waste one test attempt (initial test + retest). Subject 3 only allows five test attempts. If you fail the fifth attempt, all previously passed subjects will be invalidated, and you must start over from Subject 1. Road Test Items: Vehicle preparation, starting, straight-line driving, lane changing, passing intersections, pulling over, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and nighttime driving. Provincial public security traffic management departments may add test items for specific vehicle types based on local conditions. The safe and civilized driving knowledge test includes: requirements for safe and civilized driving operations, safe driving knowledge in adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Applicants for a motor vehicle driving license must pass the following four subjects: Traffic safety laws, regulations, and related knowledge (Subject 1), site driving skills (Subject 2), road driving skills (Subject 3), and safe and civilized driving knowledge (Subject 4). The test sequence is Subject 1, Subject 2, Subject 3, and Subject 4. You can only take the next subject after passing the previous one. Subject 3 Driving Test Notes: Do not shift gears consecutively, e.g., from 2nd to 3rd gear. You must drive a certain distance before shifting to 4th gear. Do not change lanes consecutively (i.e., do not change two lanes at once). For example, if changing from Lane 1 to Lane 2, you must drive a certain distance before changing to Lane 3. Avoid coasting in neutral, meaning do not drive with the clutch partially engaged. Ensure the gear matches the speed. For 1st gear, the speed should be 0–15 km/h; for 2nd gear, 0–25 km/h; for 3rd gear, 10–35 km/h; and for 4th gear, 20–45 km/h. When changing lanes, avoid excessive turning to prevent the front or rear of the vehicle from crossing the line (the system may judge this as crossing the line). Shifting gears must be done one gear at a time with full clutch engagement before shifting to the next gear. Do not stay in neutral for more than 5 seconds while driving. Generally, you do not need to use the handbrake when stopping, and you do not need to use the turn signal when starting, except for specific test items. Through repeated practice, the best way to shift gears is to fully release the clutch, wait a few seconds, and then press the clutch again to shift to the next gear. You can start in 2nd gear throughout the process. At traffic lights, you can stop in 2nd gear by pressing the clutch for a long time (but avoid coasting in neutral). Avoid stopping before intersections or crosswalks, except in U-turn zones. Night Test Notes: Nighttime driving mainly tests the use of lights. Nighttime lights serve both illumination and signaling purposes. To inform other road users, turn on the lights when they can outline the vehicle. Before starting at night, turn on the lights, check the road and surroundings, and start only when it is safe. When stopping, turn off the lights after the vehicle is fully stopped. Different lighting conditions require different light usage: On well-lit roads with streetlights, use low beams. On poorly lit roads without streetlights, use low beams if the speed is below 30 km/h and high beams if the speed is above 30 km/h. When following another vehicle at night at close range, use low beams and maintain a safe distance. Observe the leading vehicle's signal lights and be ready to slow down or stop. Control your speed so that you can safely stop within the illuminated distance in case of an emergency. When overtaking at night on unlit roads, turn on the left turn signal and alternate between high and low beams to alert the vehicle being overtaken. After confirming the leading vehicle yields, switch to low beams to overtake. When your vehicle's lights are at the same level as the overtaken vehicle's lights and there is no oncoming traffic, switch to high beams. After overtaking, leave enough safe distance, then turn on the right turn signal and gradually return to the original lane.

12

2

Share

How to Release the P Gear on a Buick Excelle?

Intermittently press the brake pedal, then release it and attempt to shift gears. Turn the vehicle's steering wheel and press the brake pedal to shift gears. The advantage of the vehicle is that it makes driving simpler, especially for beginners who won't encounter stalling issues when starting the car.

2

Share

How to Fix the Issue When the Infotainment System Won't Start and Only Shows the Car Logo?

What is the maximum speed of the Enjoyment?

How to Adjust the Dashboard Clock on a Wrangler?

Should the Honda Haoying Use 92 or 95 Gasoline?

What are the differences between 5w30 and 10w40?

When Can I Schedule the Subject 3 Driving Test?

How to Release the P Gear on a Buick Excelle?

What are the effects of excessive coolant?

Where is the BMW X1's Cabin Air Filter Located?

How to Repair the Seat Belt of Volkswagen Polo?

What transmission does the Tayron use?