How to Fix the Emission System Warning Light?

1 Answers
NicoleDella
07/29/25 5:37pm
Solutions for the emission system warning light being on are as follows: 1. Determine if it is a false alarm: Start and turn off the vehicle three times in a row; or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it. After performing the above operations, check if the engine warning light on the dashboard is still on; if it turns off, it is a false alarm. 2. Cause of the fault: The emission system warning light being on is mostly due to damage to the oxygen sensor in the three-way catalytic system caused by the quality of domestic fuel. If the light comes on while driving, immediately reduce speed and proceed to the nearest maintenance service station for inspection and repair.
Was this review help?
6
5
Share
More Forum Discussions

How early can a small vehicle driver's license be renewed?

Article 57 of the "Traffic Regulations Penalty Points Rules": Motor vehicle drivers should apply for license renewal at the vehicle management office of the issuing authority or elsewhere within 90 days before the expiration of their driver's license. If the driver's license expires, traffic police will impose a fine upon discovery but no penalty points will be deducted. There is a latest deadline for license renewal. If the license has expired for less than one year, it can be renewed through the normal process; if it has expired between one to three years, the license will be revoked, but it can be re-obtained by passing the subject one exam; if it has expired for more than three years, the license will be revoked. Article 57 of the "Traffic Regulations Penalty Points Rules": Motor vehicle drivers should apply for license renewal at the vehicle management office of the issuing authority or elsewhere within 90 days before the expiration of their driver's license. When applying, an application form must be filled out, and the following documents must be submitted: the driver's identity proof, the driver's license, and a medical condition certificate issued by a county-level or military regiment-level medical institution. For applications for special small automatic passenger vehicles for the disabled, a medical condition certificate issued by a specialized medical institution designated by the provincial health authority must be submitted. Materials required for driver's license renewal: original ID card and its copy, a qualified medical examination form from a hospital designated by the vehicle management office, three one-inch white-background color photos, a completed driver's license renewal application form, and a processing fee. Photos and medical examination proofs required for renewal can be brought by the applicant. If there is concern about their validity, they can be processed directly at the traffic police department's certification hall to avoid delays. Related matters for driver's license renewal upon expiration: Regarding renewal: For annual review and renewal of an expired driver's license, the old license must be surrendered to the vehicle management office. Before renewal, all related traffic violations must be resolved; otherwise, the application will not be accepted. Motor vehicle driver's license renewal can be done through the mobile app "Traffic Management 12123," or through the vehicle management office, traffic management departments, or public security authorities, effectively renewing the driver's license.
12
3
Share

What are the main maintenance items for a car?

The main maintenance items for a car include checking and replacing the engine oil, oil filter, fuel filter, air filter, cabin air filter, as well as inspecting and maintaining related systems such as spark plugs, transmission, throttle body, etc. The details of these maintenance items are as follows: 1. Engine oil and oil filter: Inspect and maintain the lubrication system to prevent excessive wear of components caused by deteriorated, insufficient, or contaminated oil. The oil filter should be replaced together with the engine oil. 2. Fuel filter: Maintain the fuel supply system to prevent clogged fuel lines due to excessive impurities, which may result in insufficient engine power or stalling. 3. Air filter: Maintain the intake system to prevent dust and impurities from entering the cylinders, which could cause wear in the compression system. The air filter should be cleaned regularly. 4. Cabin air filter: Inspect the cabin air filter to prevent excessive dust accumulation. If dust enters the evaporator, it may lead to insufficient cooling or malfunction of the air conditioning system. If the dust on the filter is not cleaned for a long time, it may produce odors and pollute the air inside the car. 5. Spark plugs: Maintain the ignition system to prevent excessive carbon buildup on the spark plugs, which could cause misfires, electrode leakage, or failure to spark, making the car unable to start. 6. Transmission: Check the transmission gear oil to prevent severe gear wear or breakage, which may cause abnormal noises, gear jumping, or sticking in the transmission. 7. Throttle body: Since the air filter may not completely remove impurities, the throttle body can easily become dirty. If the throttle plate is dirty, it may cause unstable idling, so it needs to be cleaned thoroughly. 8. Other components such as brake fluid, battery, fuel injectors, and brake pads should also be maintained to keep the car in good condition and prevent malfunctions while driving.
19
3
Share

What Type of Engine Oil is Suitable for Volkswagen Santana?

Volkswagen Santana uses Volkswagen's original engine oil, with the oil model being 5w40, which is synthetic oil. If you wish to change the oil during later maintenance, you can choose international brands such as Shell, Mobil, or Castrol, or domestic brands like Great Wall, Tongyi, or Kunlun. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W represents the ability to withstand -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Volkswagen Santana is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain; Use a specialized wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the filler cap on the engine's valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.
4
5
Share

What does a midsize SUV refer to?

Midsize SUV refers to SUV models with a body length between 4600mm-4800mm and a wheelbase of 2700mm-2900mm. 1. Midsize SUVs feature a stable and imposing exterior design while maintaining exquisite details, making them uniquely attractive to car enthusiasts with their balanced advantages. 2. Generally, for those who find compact SUVs too cramped, the spaciousness of midsize SUVs can meet their needs, with some models even offering 7-seat configurations. 3. Representative models include: BMW X3, Audi Q5, Mercedes-Benz GLK, etc.
4
2
Share

What is the score range for B1?

B1 ranges from 90 to 94 points. Here is relevant information about B1: 1. Definition: The B1 driver's license permits driving medium-sized buses, defined as vehicles not exceeding 6 meters in length with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. 2. Application Requirements: Height must be at least 150 cm, uncorrected or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart, no red-green color blindness, ability to distinguish sound source direction with each ear 50 cm from a tuning fork, both thumbs intact, at least three fingers intact on each hand, and normal limb and finger motor function.
1
4
Share

What is the Function of Automotive Sensors?

Automotive sensors serve to convert various operational condition information of a vehicle during operation, such as speed, temperatures of different mediums, and engine operating conditions, into electrical signals that are transmitted to the computer. This ensures the engine operates in its optimal state. Below is an introduction to sensors: 1. There are many types of automotive sensors. Based on their functions in vehicles, they can be categorized into temperature measurement sensors, pressure sensors, flow sensors, position sensors, vehicle speed sensors, distance sensors, etc. 2. Each sensor has its specific role. If a sensor fails, the corresponding device may not function properly or even cease to operate, thereby affecting the vehicle's performance.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.