How to Fix the Black Screen Issue on BMW 5 Series Center Console?

What does ESC in cars refer to?

Automotive ESC is a new type of active safety system in vehicles, fully known as Electronic Stability Control, which belongs to the driving assistance system of a car. The automotive ESC system is a further extension of the functions of the Anti-lock Braking System (ABS) and Traction Control System (TCS). It mainly controls the longitudinal and lateral stability of the vehicle to ensure that the vehicle moves according to the driver's intentions. At the same time, the system works in coordination with the engine ECU. When the drive wheels slip, by comparing the speed of each wheel, the electronic system determines whether the drive wheels are slipping and immediately reduces the throttle intake automatically, lowers the engine speed to reduce power output, and applies braking to the slipping drive wheels. ESC can be turned off in special road conditions or when the vehicle is stuck in mud, which helps the car get out of trouble as soon as possible. However, the ESC system should not be turned off during normal driving, as it may lead to loss of control and other phenomena, which are not conducive to safe driving.

13

2

Share

What are the functions of the clutch?

The functions of the clutch are: 1. Ensure smooth starting of the vehicle; 2. During vehicle operation, when using different transmission gears to adapt to constantly changing driving conditions, the clutch can temporarily separate the engine from the transmission, preventing the meshed force-transmitting gears in the transmission from being difficult to disengage due to unrelieved load and high pressure between the meshing tooth surfaces. The clutch is a device that transmits the vehicle engine power to the axle in an on-off manner, installed between the engine and the transmission, and is the assembly component in the vehicle drivetrain that directly connects with the engine. The clutch is located within the flywheel housing between the engine and the transmission, and the clutch assembly is secured to the rear plane of the flywheel with screws.

11

3

Share

What Causes the Squeaking Noise When Braking at Low Speeds?

Low-speed brake squeaking can be caused by: 1. Excessive wear of the brake disc and brake pads; 2. Improper installation of the brake pads; 3. Foreign objects on the brake pads or brake disc; 4. Poor caliper reset leading to prolonged friction between the disc and pads. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, or other transportation tools and machinery. Solutions for low-speed brake squeaking include: 1. Applying butter or specialized lubricant to the connection between the brake pads and the brake caliper; 2. Regularly inspecting and replacing the brake disc and brake pads; 3. Reinstalling the brake pads.

12

3

Share

Does the Peugeot 5008 Have Independent Suspension?

The front suspension of the Peugeot 5008 is an independent suspension, while the rear suspension is not. The Peugeot 5008 is a mid-sized SUV under the Peugeot brand. This vehicle features a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. The suspension connects the car body to the wheels, and without it, the car cannot operate normally. The structure and tuning of the suspension significantly impact the car's handling and comfort. The MacPherson suspension is the most common type of independent suspension. It has a relatively simple structure and a compact size, occupying minimal space. The MacPherson suspension consists of only an L-shaped control arm, which does not take up engine compartment space. Therefore, most front-transverse engine cars use the MacPherson suspension. The torsion beam suspension is a simple-structured non-independent suspension. It also occupies less space. Using a torsion beam suspension at the rear can expand the rear seating space and trunk space, which is particularly important for family-oriented SUV models.

20

4

Share

How to use the air conditioning in a Polo?

The method to use the air conditioning in a Polo is: 1. Press the AC button located below the center of the dashboard to turn on the air conditioning; 2. The left knob is for adjusting the temperature, turning it clockwise increases the temperature, while turning it counterclockwise decreases the temperature; 3. The middle knob adjusts the fan speed; 4. The left knob adjusts the direction of the air vents and can also be used for the windshield defogging function. The Polo's body dimensions are: length 4053mm, width 1740mm, height 1449mm, with a wheelbase of 2564mm. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 83 kW and a maximum torque of 145 Nm.

19

3

Share

Which generation is the 2010 Accord?

The 2010 model belongs to the 8th generation Accord, which is a vehicle under GAC Honda. Taking the 2021 Accord as an example, its body dimensions are: length 4893mm, width 1862mm, height 1449mm, with a wheelbase of 2830mm, fuel tank capacity of 56 liters, and curb weight of 1495kg. The 2021 Accord is equipped with a 1.5T turbocharged engine, delivering a maximum power of 143kW and maximum torque of 260Nm, paired with a CVT transmission. It adopts a front MacPherson strut independent suspension and rear multi-link independent suspension.

4

2

Share

How to Fix the Black Screen Issue on BMW 5 Series Center Console?

What does ESC in cars refer to?

What are the functions of the clutch?

What Causes the Squeaking Noise When Braking at Low Speeds?

Does the Peugeot 5008 Have Independent Suspension?

How to use the air conditioning in a Polo?

Which generation is the 2010 Accord?

What are the models that meet the China VI emission standards?

How to Tell If You Turned the Steering Wheel Too Early or Too Late When Reversing into a Parking Space?

What happens if engine oil is changed late?

Where is the water temperature gauge on the Geely Emgrand?