How to Fix Front Tire Wear on Baojun 730?
4 Answers
The solutions for front tire wear on Baojun 730 are: 1. Replace loose tie rod ends and perform a four-wheel alignment; 2. Check tire pressure and inflate as needed; 3. Readjust the toe-in and camber settings. Taking the 2021 Baojun 730 as an example, its body dimensions are: length 4780mm, width 1780mm, height 1740mm, with a wheelbase of 2750mm and a fuel tank capacity of 52 liters. The 2021 Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 108kW and a maximum torque of 250Nm, paired with a 6-speed manual transmission.
I used to drive a Baojun 730, and uneven tire wear (commonly called "tire cupping") was a frequent issue. Simply put, it's uneven tire wear, mostly caused by incorrect wheel alignment—like improper toe settings or loose suspension components. My car had this problem—I first checked the tire pressure myself to ensure it was within the standard 25-30 psi range, then took it to a professional shop for a four-wheel alignment. After adjustment, the issue was resolved. Regular tire rotation every 5,000 km is also crucial to prevent recurrence. If the problem persists, check if components like shock absorbers or ball joints are worn out. Don’t delay—ignoring this can lead to increased fuel consumption, unstable handling, and safety risks. Get it fixed promptly.
When driving the Baojun 730 on long-distance trips, I noticed significant inner tire wear on the front wheels, caused by uneven wear due to aging suspension components. My personal suggestion is to start with simple checks: measure the tire pressure to ensure consistency between front and rear tires, with 28psi being generally ideal. Then, observe if there are any unusual noises during steering. If so, take it to a repair shop for alignment correction. I once replaced the bushings and solved the problem. During regular car washes, check the tire treads; balanced wear can extend tire life. Safety-wise, prolonged uneven wear can easily lead to tire blowouts, especially in rainy conditions when it becomes very slippery. Don't compromise safety to save a little money.
The front tire wear issue on the Baojun 730 is often caused by incorrect wheel alignment or tire pressure problems, which I've encountered several times. Quick solution: Immediately check tire pressure and suspension, and if abnormal, go to a shop to adjust the toe-in. Don't overlook daily maintenance, such as regular tire rotation to reduce wear. Safety first, as this fault affects braking performance and can be quite dangerous at high speeds, so address it promptly.
