How to Fix Dash Cam Time Synchronization Issues?

1 Answers
AbelLynn
07/29/25 3:04pm
To resolve dash cam time synchronization issues, follow these steps: 1. Press the menu button and navigate to the time settings interface; 2. Adjust the time using the function key, then press the menu button to return to the main interface. A dash cam is a device that records video and audio data during vehicle operation, consisting of a main unit, speed sensor, and data analysis software. Its functions include: 1. Protecting drivers' legal rights; 2. Reviewing recorded footage for quick and accurate accident handling; 3. Preserving crucial evidence from incidents to promote safe and smooth traffic conditions; 4. Reducing accident rates and hit-and-run cases.
Was this review help?
13
3
Share
More Forum Discussions

How long does it take for symptoms to appear after water enters a dry dual-clutch transmission?

Symptoms will appear quickly after water enters a dual-clutch transmission, which can damage the transmission's control mechanism. If this happens, the control mechanism of the transmission needs to be replaced. Under normal circumstances, the probability of water entering a dual-clutch transmission is very low, so as long as it is used normally, there is no need to worry about water entering the dual-clutch transmission. Relevant information about the transmission is as follows: 1. Introduction: A device that changes the speed ratio and direction of motion. It is used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several pairs of gears. 2. Function: While driving, to adapt to different working conditions, the vehicle's driving force and speed need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the need for a transmission.
6
3
Share

What Causes the Rear Wheel of a Motorcycle to Overheat?

There are several reasons why the rear wheel of a motorcycle may overheat: 1. Prolonged braking: Whether the rear wheel uses drum brakes or disc brakes, prolonged braking can cause the rear wheel to overheat. This is especially true for drum brake systems, which have poorer heat dissipation and are more prone to this issue. 2. Riding with the brakes engaged: Riding with the brakes partially engaged is equivalent to riding while constantly applying the brakes. This condition can easily cause the wheel to overheat, primarily due to brake system malfunctions or improper adjustments. 3. Bearing damage: The rear wheel rotates smoothly mainly because of the bearings inside the hub. However, if these bearings lack lubrication, they may experience increased resistance or damage during operation, causing the hub temperature to exceed design standards. 4. Tire overheating: If the tire pressure is insufficient, the excessive deformation during operation can lead to overheating. This issue is related to the tire itself and has little to do with the mechanical structure of the wheel.
8
0
Share

Why can't the rearview mirror of the Mercedes-Benz GLC260 fold?

The reasons why the rearview mirror of the Mercedes-Benz GLC260 cannot fold: Possible sensor failure is considered, it is recommended to check and repair; if the folding switch is not set to AUTO, it will not fold when locking the car; a door is not closed properly, find out which door is not closed tightly and close it. Solutions for the inability to fold: First, try folding it manually. If it works normally, go to the vehicle interface settings on the central control screen. If it doesn't fold manually, there is a fault and it needs to be checked and repaired at the shop. The function of the rearview mirror: The car's rearview mirrors are located on the left and right sides of the car's front and inside the car. The car's rearview mirrors reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these positions clearly.
16
3
Share

Why did the Audi Q5L's fuel consumption suddenly increase?

A sudden increase in the fuel consumption of the Audi Q5 could be caused by reasons such as excessive load in the vehicle, carbon deposits in the engine, or low tire pressure. The specific reasons are as follows: Excessive vehicle weight: The weight of the vehicle has a significant impact on fuel consumption. When the vehicle is fully loaded, fuel consumption inevitably increases. Therefore, it is advisable to minimize unnecessary items in the car to reduce weight and achieve fuel savings. Severe engine carbon deposits: If there is a significant buildup of carbon deposits in the engine in a short period, it can also lead to higher fuel consumption. This situation is likely due to the use of substandard fuel. The solution is to add a certain amount of cleaning agent when refueling. If the carbon deposits are extensive, it is necessary to visit a 4S store or a repair shop for professional cleaning. Do not attempt to clean it yourself at home.
9
4
Share

How to explain the four driving modes of the Trumpchi GM8?

The Trumpchi GM8 does not have four driving modes, but only three: Sport mode, Eco mode, and Standard mode. In Sport mode, the car delivers stronger power; in Eco mode, the power is weaker, but the fuel economy is better; in Standard mode, the car balances both power and fuel economy. The Trumpchi GM8 is an MPV model under the Trumpchi brand. The dimensions of this car are 5066 mm in length, 1884 mm in width, and 1822 mm in height, with a wheelbase of 3000 mm. The Trumpchi GM8 is equipped with a 2.0-liter turbocharged engine across all variants, delivering 252 horsepower and a maximum torque of 390 Nm. The maximum torque is achieved at 1750 to 4000 rpm, while the maximum power is reached at 5250 rpm. This engine features CVVT technology, direct fuel injection, and uses an aluminum cylinder head with a cast iron cylinder block.
9
4
Share

What Happens If You Cancel an Appointment More Than 3 Times?

If you cancel an appointment more than three times, the system will lock the cancellation function, making it unavailable for use. Below is relevant information about the driving test: 1. Definition of Driving Test Simulation Fee: The simulation fee and venue fee refer to the costs required for conducting a simulated test at the examination site. During the process of obtaining a driver's license, apart from the registration fee, simulation fee, and venue fee, there are no additional charges. However, the decision to take the simulation test or not is entirely up to the individual—you may choose to simulate or not. 2. Driving Test: Applicants for a motor vehicle driver's license must pass the following four examination subjects: Road Traffic Safety Laws, Regulations, and Related Knowledge (Subject 1), Site Driving Skills (Subject 2), Road Driving Skills (Subject 3), and Safe and Civilized Driving Knowledge (Subject 4). The examination sequence proceeds from Subject 1 to Subject 2, Subject 3, and then Subject 4. Only after passing the previous subject can one proceed to the next.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.