···
Log in / Register

How to Fix a Wuling Rongguang Tailgate That Won't Open?

4 Answers
OJohnny
08/27/25 5:48am

Lift the rear seat upwards to release the seat hook from the steel plate; then fold down the rear seat and remove the felt cover in the trunk. Find a suitably sized binder clip and clamp it onto the hook of the S-shaped linkage. If the clip is large enough, it will extend a few millimeters, which is sufficient. Once clamped, it acts like a tube covering the head of the S-shaped linkage, with the extra length compensating for the gap. After attaching the binder clip, the setup becomes very sturdy, and the trunk will open with a gentle pull.

Was this review help?
3
5
Share
VonBentley
09/09/25 4:44am

I've been driving a Wuling Rongguang for years delivering packages, and often run into the annoying issue of the tailgate not opening. Most of these tailgates are manual mechanical types, with the most common causes being rusted and stuck latches or detached linkage rods. First, check if anything stored in the trunk is blocking the door seam, like piled-up packages that might press against the switch; then try gently pushing or pulling the door handle, or apply some lubricant to the lock cylinder. If it still doesn't work, don't force it open as it can easily damage the paint or break the linkage rod. With regular maintenance, simply wiping the latch and applying a few drops of oil every quarter can prevent rust. In case of an emergency where it won't open, it's advisable to visit a professional auto repair shop for disassembly and repair to save a lot of hassle.

Was this review help?
6
3
Share
Expand All
LiamDella
10/23/25 5:34am

I've also experienced the awkward situation of not being able to open the door when using my Wuling Rongguang for cargo transport. I think it's best not to yank it forcefully right away—it might just be a frozen lock or a loose screw. I would first check if there are any leaves or debris blocking the trunk lock from the outside, and use a soft cloth to clean the keyhole. Then, I'd try operating the switch back and forth several dozen times to get a feel for it. If it still won't open, I'd use a thin wire to hook the internal linkage—but not too deep to avoid damaging any parts. Usually, it's good practice to avoid placing heavy objects near the door to prevent jamming. Addressing such issues early on doesn't cost much and can help avoid major repairs.

Was this review help?
19
0
Share
Expand All
EloiseDella
12/06/25 5:57am

It's really annoying that the Wuling Rongguang's tailgate won't open. First, rule out minor issues by checking for any foreign objects stuck, like items pressing against the lock. Try pulling the handle a few times. If it still doesn't work, it might be a mechanical lock failure or rust—try lubricating it. If it still won't open, you'll need to find someone to repair it. Don't try to dismantle it yourself to avoid causing damage.

Was this review help?
20
3
Share
Expand All
More Forum Discussions

What Causes the Engine to Shake and Stall During Cold Start?

The reason for the engine shaking and stalling during cold start is carbon buildup. Carbon deposits typically accumulate on the inner walls of the throttle body, the intake valve heads, the inner walls of the intake manifold, and the combustion chamber walls. Excessive carbon buildup on the throttle body's inner walls can restrict airflow, leading to difficulty starting or stalling at idle. Once the coolant reaches the engine's normal operating temperature, the throttle opening may exceed the normal idle value, causing the ECU to repeatedly adjust the throttle plate position, resulting in fluctuating idle speeds. If carbon deposits accumulate excessively on the intake valve heads, the valves may not seal properly, making cold starts even more difficult. Even if the engine manages to start, it may stall quickly. Additionally, as the engine warms up, the fuel absorbed by the carbon deposits evaporates and is drawn into the cylinders for combustion. This uncontrolled fuel supply can lead to an overly rich air-fuel mixture, further causing poor engine performance.
13
1
Share

What does the BMW DTC light mean?

When the DTC (Dynamic Traction Control) light illuminates on the BMW dashboard, it indicates that the DTC system is activated. Its primary function is to allow a certain degree of wheel slip, providing the vehicle with additional traction. Below is a detailed introduction to the BMW X3: 1. Powertrain: The BMW X3 is equipped with a 2.0T turbocharged engine. BMW offers three power variants for this model, all featuring the 2.0T turbocharged engine but with different outputs: 25i, 28i, and 30i. 2. Engine Specifications: The 25i variant's engine delivers a maximum power of 135 kW and a maximum torque of 290 Nm. The 28i variant's engine produces a maximum power of 165 kW and a maximum torque of 310 Nm. The 30i variant's engine generates a maximum power of 185 kW and a maximum torque of 350 Nm.
8
1
Share

What to Do When a Vehicle's Exhaust Test Shows Excessive Carbon Monoxide Levels?

If the CO level in the exhaust test exceeds the standard, you should check the air filter, spark plugs, intake air temperature sensor, and intake manifold pressure sensor. Additionally, consider adding dual-core anti-wear repair agents and high-efficiency cleaners. If these measures are ineffective, clean the three-way catalytic converter. Below is relevant information: 1. Excessive exhaust emissions mainly refer to carbon monoxide, nitrogen oxides, and nitrogen-hydrogen compounds exceeding the national exhaust emission standards. These excessive emissions are directly related to carbon buildup within the fuel supply system. More carbon buildup leads to more severe emissions, while less buildup results in milder issues. 2. Excessive carbon monoxide in a vehicle's exhaust is primarily due to poor combustion. The main causes of this phenomenon include: failed spark plugs, poor ignition, excessive cylinder wall clearance, uncalibrated valve timing, a failed three-way catalytic converter, and poor fuel injector atomization.
20
2
Share

What Are the Best Brands for Car Window Tinting Film?

Some of the better brands for car window tinting film include Quantum, Solar Gard, Llumar, V-Kool, and 3M. After applying the film to the windshield, it effectively blocks UV rays, protecting the dashboard from radiation and extending its lifespan. Car window tinting involves applying a thin film to the front and rear windshields, side windows, and sunroof. This film is also known as solar film or heat-insulating film. The primary functions of car window tinting film are to block UV rays, reduce heat, prevent injuries from shattered glass, and reduce glare. While window tinting is beneficial, it's important to choose a high-quality film and pay attention to the following aspects during the installation process: 1. The installation area must be kept clean; avoid using electric fans and never install the film by the roadside. 2. The window glass must be absolutely clean, as any dust particles left on the glass will significantly affect the film's adhesion and clarity. 3. The solar film should only be applied to the inside of the glass.
4
4
Share

Can People Sit in the Car While the Tesla is Charging?

Answer: It is not recommended. The specific reasons are as follows: Theoretically, it is relatively safe, but actual situations may deviate. During charging, the car is connected to a high-voltage interface, and the vehicle's state differs from normal conditions. In case of an accident, sitting inside the car could expose the person to electric shock, which is dangerous given the high voltage used for charging, which the human body cannot withstand. Additional Information: Cars have a certain spontaneous combustion rate, although the probability is extremely low. However, it is still not worth taking the risk. Without a guarantee of 100% safety, it is best not to sit inside the car to ensure absolute safety.
4
4
Share

What should be paid attention to when reversing at night?

When reversing at night, you need to pay attention to: 1. First, carefully observe the parking position and mentally simulate an exit route map. At night, the visibility is poor in all directions, and even with full concentration, many obstacles may not be visible. Therefore, it is essential to walk around the car to identify all potential collision points; 2. All interior lights should be turned off. When the interior brightness is too high, the car windows act not as transmitters but as reflectors of interior light, which significantly impacts driving safety; 3. The illumination of the reversing lights is limited. Make full use of the brightness of the brake lights. Many cars only have one reversing light, which provides limited illumination. The lighting effect from inside the car is also limited. Therefore, you should utilize the lighting capability of the brake lights. The deeper you press the brake pedal, the stronger the lighting capability. If you are unsure about obstacles behind you, pressing the brake pedal deeper can be very helpful.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.