How to Fix a Reversed Rearview Camera Display?

1 Answers
LaAndrew
07/29/25 7:08pm
Solutions for a reversed rearview camera display: 1. Open the settings interface of the car navigation system; 2. Locate the rearview mirror option in the settings interface; 3. Change the rearview mirror status to off. The rearview camera, also known as a parking assist system, reverse visual system, or onboard monitoring system, is used in vehicle reversing or driving safety assistance. Reasons why the rearview camera may not display: 1. Poor line contact, resulting in a loose connection; 2. Aging of the video power cable; 3. Prolonged use of the rearview camera leading to poor chip photosensitivity; 4. The rearview camera being blocked; 5. Malfunction of the rearview camera display screen.
Was this review help?
14
0
Share
More Forum Discussions

What Causes the Alarm to Sound After Locking the Car?

Here are several reasons why the alarm may sound after locking the car: 1. Issue with the hood latch button: If there's a problem with the two small buttons near the front hood, adjusting the hood upwards can resolve this issue. 2. Damaged sensor button: If the sensor button on the driver's side door is damaged, it needs to be inspected and replaced at a 4S shop. 3. Malfunctioning alarm system: If the alarm system is malfunctioning, it is recommended to deactivate the alarm and investigate the root cause of the alarm trigger, checking each possibility one by one. Note: Generally, if the vehicle alarm cannot detect the front sensor or if the front sensor sends an alarm signal, the vehicle alarm will subsequently sound.
5
3
Share

What lights should be turned on when driving in fog at night?

When driving in fog at night, the lights that should be turned on include fog lights, tail lights, marker lights, and low beams. High beams should not be used. More information about driving in fog at night is as follows: 1. Article 58 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": When motor vehicles are driving at night without street lights, poor lighting, or in conditions of low visibility such as fog, rain, snow, dust, or hail, they should turn on headlights, marker lights, and rear position lights. However, high beams should not be used when the following vehicle is driving close to the preceding vehicle in the same direction. High beams should not be used because the upward tilt of the high beam axis causes the light to scatter diffusely in the fog, creating a blinding white haze in front of the vehicle, making it impossible to see anything while driving. 2. Before driving in fog, remember to thoroughly check your vehicle's lighting system. While driving, follow the regulations on light usage to maximize visibility and clearly observe the movements of vehicles and pedestrians. When driving in fog, strictly adhere to the speed limits set by traffic rules and avoid speeding. The thicker the fog, the shorter the visibility distance, and the lower the speed should be. When visibility is less than 200 meters but greater than 100 meters, the speed should not exceed 60 km/h. When visibility is less than 100 meters but greater than 50 meters, the speed should not exceed 40 km/h. When visibility is within 30 meters, the speed should be controlled below 20 km/h. If visibility is within 10 meters, it is recommended to stop by the roadside and not continue driving.
16
3
Share

Which BMW model is the G28?

BMW G28 refers to the new domestically produced long-wheelbase version of the BMW 3 Series, and G28 represents the seventh generation of the BMW 3 Series. More details are as follows: 1. The standard-wheelbase version of the seventh-generation 3 Series is codenamed G20. 2. The entire lineup is equipped with a 2.0-liter turbocharged four-cylinder engine, available in three variants: a low-power version, a medium-power version, and a high-power version of the 2.0-liter turbocharged engine. 3. On June 22, 2019, the new BMW 3 Series was officially launched, offering a total of 6 models, including the long-wheelbase version (G28) and the standard-wheelbase version (G20).
5
2
Share

What Causes the Engine Water Temperature to Remain Consistently Low?

Car water temperature remains low due to: thermostat failure, water temperature sensor malfunction, or cooling fan continuously running. Normally, the engine's proper operating temperature ranges from 90°C to 100°C, neither too high nor too low. Typically, it takes a few minutes for the temperature to rise from startup. Exceeding this time can be judged as the water temperature being too low. Below are detailed explanations: Thermostat Failure: If the thermostat fails, it directly prevents the water temperature from rising. Water Temperature Sensor Malfunction: Another reason the engine water temperature does not rise could be a faulty water temperature sensor (interruption in the temperature signal to the dashboard). A malfunctioning water temperature sensor prevents the temperature gauge needle from operating correctly, creating the illusion that the water temperature isn't rising, even if the engine temperature is high, the gauge shows no response. Cooling Fan Continuously Running: Both overheating and overcooling affect the car's normal operation, making heat dissipation regulation crucial. The cooling fan is a key component in regulating the engine's heat dissipation. Normally, when the engine water temperature reaches a certain level (generally above 90°C, varying by specific models), the cooling fan automatically turns on to accelerate heat dissipation and prevent the engine from overheating. However, if the cooling fan continues to run when the engine is cold, it hinders the engine from warming up quickly and increases fuel consumption.
14
4
Share

New Vios 0w20 or 5w30?

New Vios uses 0w20. The internal components of the new Vios engine are relatively precise with small gaps, so low-viscosity 0w20 engine oil is sufficient. Below is the relevant content introduction: 1. Meaning: The 'w' in engine oil stands for winter. The smaller the number before 'w', the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable temperature. The larger the number after 'w', the higher the viscosity, and the higher the applicable temperature. The Vios is an entry-level family car designed and developed by Toyota for the Asian market. The car's engine is equipped with a domestically produced 16-valve 5AFE engine. 2. Main models: Vios models include: 1.3MT GL Special Edition, 1.5MT GLi, 1.5AT GLi, 1.5AT GLS, 1.5AT GLXi.
6
0
Share

What are the body dimensions of the Trumpchi GS8?

The body dimensions of the Trumpchi GS8 are 4810mm in length, 1910mm in width, and 1770mm in height. Below is a related introduction to the Trumpchi GS8: 1. In terms of body dimensions, the length, width, and height are 4810mm, 1910mm, and 1770mm respectively. 2. In terms of power, the vehicle is equipped with a 2.0-liter turbocharged engine across all variants, delivering a maximum torque of 252 horsepower and 390 Nm. This engine features DCVVT technology and direct fuel injection, with an aluminum cylinder head and cast iron cylinder block, paired with a 6AT transmission. 3. The Trumpchi GS8 uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.