···
Log in / Register

How to Fix a Non-Illuminating Car Display Screen?

5 Answers
SanPaislee
07/29/25 8:30am

The reasons and solutions for a car's display screen not lighting up are as follows: 1. Poor line contact: It is necessary to promptly check whether there is a loose connection in the wiring. 2. Signal line issue: The power signal line may have aged; try replacing it with a new one. If the black screen issue is resolved, it indicates that the power signal line was indeed problematic. 3. Power supply module failure: Prolonged use of the screen may cause the power supply module to malfunction, resulting in a black screen. 4. Circuit design flaw: It is necessary to go to a repair shop for inspection and repair or directly replace the unit.

Was this review help?
10
5
Share
LaGabriella
08/12/25 5:37am

As a seasoned driver with over a decade of experience, I've encountered the issue of a non-functioning car display screen several times. When the screen suddenly goes black or fails to turn on, I first troubleshoot common minor issues myself. The most frequent culprit is a blown fuse—locate the multimedia system fuse in the fuse box (usually around 10A) and replace it with a new one. If that doesn’t work, check for loose or corroded power connections, especially around the plugs; sometimes simply reseating them can fix the problem. System freezes are another possible cause, so try restarting the vehicle: turn off the engine, wait two minutes, and restart, or disconnect the car battery’s negative terminal for a few minutes before reconnecting. Keep in mind that over time, display components may degrade, such as LCD panel failure or circuit issues, which require professional diagnosis. Don’t push your luck—if DIY fixes don’t work, visit a repair shop promptly to avoid safety risks from missing navigation info while driving.

Was this review help?
6
2
Share
Expand All
OReese
10/05/25 6:44am

As a frequent long-distance driver, I know how annoying it can be when the screen doesn't light up. The first thing to do is check the fuse—see if the corresponding fuse in the fuse box has blown and try replacing it. Next, inspect the power cable connection: unplug and replug the connector to check for poor contact or corrosion that might be interrupting the current. Software issues are also quite common, such as system crashes—you can press the reset button in the car or remove and reinsert the SD card to reboot. Internal screen failures, like a burnt-out backlight or a faulty driver board, require disassembly for inspection. By the way, low car battery voltage or an unstable alternator could also cause the screen to lose power. My advice is to try these simple DIY steps first; if they don’t work, head to a professional shop to avoid delaying your trip. Regular maintenance checks on wiring connections can effectively prevent such issues.

Was this review help?
9
1
Share
Expand All
Derek
11/18/25 8:14am

I remember when the car screen went black last time, don't panic. The simplest solution is to restart the vehicle. Turn off the engine, wait a few minutes, and then start it again—sometimes the system just recovers. Alternatively, check the buttons; it might be that the display function was accidentally turned off. If that doesn't work, pop the hood and check if any fuses are blown. Look for a 5A fuse in the fuse box and replace it if necessary. Loose power cables are also a common issue—just press the connectors firmly to ensure they're secure. These are basic troubleshooting steps even beginners can handle without needing many tools. If none of these steps fix the problem, it's likely something more serious, so don't hesitate to take it to a repair shop and let the professionals handle it.

Was this review help?
2
5
Share
Expand All
DeDante
11/18/25 8:16am

In my driving experience, a black screen on the car display should not be taken lightly, especially when it affects driving information. It might be a blown fuse, so try replacing it with a new one. Power cord issues like oxidation or corrosion can cause poor contact – sand the connectors or plug them in tightly. If the screen itself has reached the end of its lifespan, it may malfunction and require replacement. An aging car battery with unstable voltage can also trigger this issue. I recommend checking these basic points first to ensure driving safety. If there's no improvement, get it repaired promptly to avoid difficulty seeing navigation at night.

Was this review help?
6
0
Share
Expand All
More Forum Discussions

What is the issue with the Audi hydraulic oil elbow bushing noise?

Audi hydraulic oil elbow bushing noise issue is caused by valve oil leakage and joint detachment. Below is the relevant introduction: 1. Introduction: Audi is a renowned car developer and manufacturer, with its logo featuring four interlocking rings. It is now a subsidiary of Volkswagen Group, headquartered in Ingolstadt, Germany. 2. Main models: Audi A1, Audi A3, Audi A4, Audi A5, Audi A6, Audi A7, Audi A8, Audi Q1, Audi Q2, Audi Q3, Audi Q5, Audi Q7, Audi Q8, Audi TT, Audi R8, and the S, RS performance series, etc.
17
2
Share

Why are second-hand Besturn B50 cars so cheap?

First, the pricing is not high; second, the sales of new cars are not good, with continuous price reductions leading to depreciation of used cars; third, the marketing is poor. Additional information is as follows: 1. In terms of comfort: The Besturn B50 continues to optimize vibration and noise control, achieving improvements in areas such as passing noise and constant-speed driving vibration noise, enhancing the quietness of the cabin space. At the same time, the Besturn B50 is also equipped with an audio system configuration, such as the addition of an AUX interface, forming two external audio source playback functions with USB, providing users with more choices. 2. In terms of configuration: The Besturn B50 adds a cornering assist lighting system, which can automatically control the cornering lights (front fog lights) based on changes in driving conditions and vehicle status. In addition, new safety equipment includes a reminder for the front passenger seatbelt not being fastened, anti-whiplash seats, full hidden airbags, central locking, and headlight level adjustment.
1
5
Share

Tesla's Maximum Wading Depth?

Tesla's maximum wading depth is 138mm. Tesla's wading depth is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. Alternatively, installing a wading snorkel can increase the height of the engine's air intake, thereby increasing the maximum wading depth. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could lead to severe damage if water enters the engine. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, avoid entering the water and choose an alternative route instead.
11
4
Share

Should the Nissan Sylphy ECO Mode Be Turned On?

In congested urban traffic conditions, turning on the ECO mode yields the best results, while it is unnecessary during high-speed driving. In stop-and-go city traffic, strong power is not required, and frequent acceleration and braking lead to higher fuel consumption. Activating the ECO mode in such scenarios not only reduces fuel consumption but also enhances driving comfort. Scenarios where ECO mode is unnecessary: There are a few situations where ECO mode is not needed: 1. When the car is driving at high speeds (up to 100km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. 2. When high torque output is required, such as when climbing hills, the engine computer will prioritize delivering sufficient power to drive the vehicle, and the ECO mode will automatically deactivate. Location of the ECO button: The ECO button is typically located on the left side of the car, marked with the letters 'ECO.' Some models feature a green button, making it easily identifiable.
12
2
Share

Do I Need to Change to Snow Tires When Driving to Northeast China During the Spring Festival?

Driving to Northeast China requires snow tires, as their grip performance is significantly better than regular summer tires or all-season tires. If you encounter icy roads, most vehicles without snow tires will be unable to move. Snow tires help vehicles achieve optimal braking performance on winter roads. Snow tires, also known as winter tires, are made by adding certain additives to ordinary rubber during production, ensuring the tires do not harden significantly in winter. Regular tires tend to become very hard in winter, reducing their grip and making them prone to slipping in snowy conditions. The tread material of snow tires is softer, and their specially formulated silica-mixed rubber compound allows for tighter contact with smooth ice surfaces, generating greater friction than all-season tires. This improves the vehicle's handling and safety on icy roads. Tires are rubber products, and prolonged use leads to aging. Therefore, it is recommended that car owners replace their tires regularly. Generally, tires should be replaced every four years. When purchasing tires, make sure to check the production date clearly.
16
2
Share

Where is the China VI Emission Standard Implemented?

The China VI emission standard has been implemented ahead of schedule in regions such as Beijing-Tianjin-Hebei, Yangtze River Delta, Pearl River Delta, Chengdu-Chongqing, Fenwei Plain, and Inner Mongolia. Specific provinces and cities include Beijing, Tianjin, Hebei, Shanxi, Shandong, Henan, Shanghai, Jiangsu, Zhejiang, Anhui, Shaanxi, some cities in Inner Mongolia, Guangdong, Chongqing, Sichuan, and Hainan. The early implementation regions are based on national-level documents such as the 'Blue Sky Defense Battle' and the 'Action Plan for the Battle Against Pollution by Diesel Trucks,' combined with statistics, leading to the issuance of the 2019 document on the early implementation of the China VI standard in these provinces and cities. For light vehicles (such as cars, SUVs, pickup trucks, and micro trucks), the normal implementation time for the China VI standard is July 1, 2020. For general-purpose heavy-duty vehicles, the implementation date is July 1, 2021.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.