···
Log in / Register

How to fix a deep scratch and dent on the car?

1Answers
MartinLynn
07/24/2025, 02:50:31 PM

Solutions for a deep scratch and dent on the car include: 1. Apply toothpaste: Rub toothpaste on the scratch and wipe back and forth to effectively remove the scratch and prevent rust; 2. Use polishing wax; 3. Touch-up paint: First apply filler to the scratch, then proceed with touch-up painting. The steps are waxing, sanding, cleaning, and waxing again—avoid using too much wax, just enough to cover the damaged area; 4. Use an eraser to rub. For new cars, scratches and dents should be addressed promptly to maintain appearance and prevent rust or corrosion. Car scratches are categorized into three levels: 1. Light surface scratches; 2. Damage to the car's topcoat paint; 3. Damage to the car's primer or even deformation.

Was this review help?
108
Share
More Q&A

Is the Electronic Throttle Controller Reliable?

Electronic throttle controllers offer the following advantages: 1. Amplifying throttle signals to enhance static response: The so-called 'acceleration' of an electronic throttle controller is primarily achieved by increasing throttle response sensitivity, amplifying the input throttle signal by 50%. 2. Boosting throttle signal growth rate to improve dynamic response: When the accelerator pedal is pressed, the controller calculates the rate of change in the throttle signal based on the depth and duration of the press. The faster the change, the stronger the acceleration demand. The throttle controller then increases this rate of change, ultimately resulting in better dynamic response during acceleration.
114
Share

How to Turn Off the Auto-Folding Mirror Function?

Method to disable the auto-folding mirror function: Access the system settings via the menu button on the steering wheel, locate the mirror settings, and then turn off the auto-folding feature. Mirrors can be categorized by installation location into: 1. Interior rearview mirror: Designed to allow drivers to check the rear view without significantly altering their forward line of sight. 2. Exterior side mirrors: Typically mounted on the doors of passenger vehicles. In Japan, they are often installed on the fenders. 3. Undercarriage mirrors: Enable drivers to view areas beyond the front and rear wheels beneath the vehicle body from the mirror directly ahead in the driver's seat. This helps drivers detect people or obstacles near the wheels or vehicle sides when reversing or starting forward, preventing injuries, damage to objects, or vehicle harm.
113
Share

What is the speed limit for the leftmost lane on the highway?

On highways, the leftmost lane is the overtaking lane, so the minimum speed is 110 km/h. Below are the highway speed limit regulations: 1. Lane speed limits: The corresponding speeds for left, middle, and right lanes are generally a minimum of 110 km/h for the leftmost lane, 90 km/h for the middle lane, and 60 km/h for the rightmost lane. 2. Violations: Driving a motor vehicle on the highway at a speed below 60 km/h will result in a 3-point deduction and a fine. For medium-sized or larger passenger or cargo vehicles and hazardous material transport vehicles, driving below 20% of the minimum speed limit on the highway will not incur fines or point deductions.
117
Share

What score is required to pass the Subject 1 test?

The passing score for the Subject 1 test of the driver's license exam is 90 points. The test consists of 100 questions, divided into single-choice and true/false questions, with each question worth 1 point, totaling 100 points. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if 11 questions are answered incorrectly during the test, the system will automatically submit the test and end the exam. Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. Subject 1 test content: Driver's license and motor vehicle management regulations; Road traffic conditions and regulations; Road traffic safety violations and penalties; Road traffic accident handling regulations; Basic knowledge of motor vehicles; Local regulations; Knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; Specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should pay attention to their attire, no slippers are allowed, electronic devices and bags are not permitted in the test room, bring an ID card, and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the test room. Upon entering the test room, the identity verification station will assign a seat. After finding the seat, begin the test. Ensure the camera is aligned with you and follow test discipline. If you fail the first time, there is a retake opportunity on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect the score report and sign it. Failure to sign will render the test invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, and if you fail, you can retake it once. If you do not take the retake or fail the retake, the test will be terminated, and the applicant must reschedule. For Subject 2 and Subject 3, there are only 5 test attempts, and rescheduling must be done at least 10 days later. If you fail the Subject 3 safety and civilized driving knowledge test, the previously passed road driving skills test results remain valid. The driver's license exam consists of 3 subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge test. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such thing as Subject 4.
101
Share

Can National Standard 2 Vehicles Still Be Driven?

National Standard 2 vehicles can still be driven, but they are prohibited from being sold, registered, or transferred. Below are the relevant requirements: 1. Regulations: The "Three-Year Action Plan for Winning the Blue Sky Battle" issued by the State Council clearly states that starting from July 1, 2019, key regions, the Pearl River Delta, and the Chengdu-Chongqing region will implement the National Standard 6 emission standards ahead of schedule. The use of gas vehicles that meet the National Standard 6 emission standards is promoted. 2. National Standard 6 Emission Documents: Fifteen provinces and municipalities across the country have successively issued documents to implement the National Standard 6 emission standards ahead of schedule in 2019. This means that from July 1, 2019, only vehicles that meet the National Standard 6 emission standards can be registered.
109
Share

What engine is used in the George Patton Tank?

The George Patton Tank is equipped with a 3.5-liter 6-cylinder turbocharged engine, delivering a maximum horsepower of 435 hp, a maximum power of 320 kW, and a maximum torque of 723 Nm. The George Patton Tank is a large SUV produced by George Patton. In terms of body dimensions, it measures 5930mm in length, 2537mm in width, and 2145mm in height. For the transmission, the George Patton Tank uses a 10-speed automatic manual transmission. In terms of drivetrain, the vehicle features front-engine four-wheel drive. For suspension types, the front suspension is an independent double-wishbone suspension, while the rear suspension is a solid axle non-independent suspension.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.