···
Log in / Register

How to Fix a Broken Car Wiper?

5 Answers
PeytonMarie
07/28/25 9:25am

Methods for dealing with a broken wiper: 1. It may be a blown fuse. Simply open the fuse box and replace the fuse. 2. If a glass tube fuse is blown, you can temporarily wrap several layers of tin foil from a cigarette around the glass tube as a substitute. 3. If the wiper suddenly breaks, applying soap on the windshield can maintain clear visibility for about 30 to 40 minutes. 4. The wiper consists of a rubber blade encased in metal, which is inserted into the end of the wiper arm. Over time, the wiper blade may detach, causing the arm to directly rub against the glass. This not only fails to clean the rain effectively but can also scratch the glass. If the left blade falls off, you can remove the right blade and install it on the left side, wrap the right wiper head with cloth, or remove the wiper arm to avoid damaging the windshield.

Was this review help?
2
5
Share
MacTheo
08/11/25 3:41pm

As a DIY car enthusiast, I've encountered wiper failures multiple times. First, don't panic. When wipers stop working, check if the wiper blades are worn or the rubber is cracked - this is the most common issue. Replacing blades is super easy: just buy matching blades at an auto parts store and install them in about ten minutes (online tutorials make it simple). If the wipers don't move at all, it might be a blown fuse. Open the fuse box, locate the wiper fuse, and replace any blackened fuses. If fuses are good, the motor might be faulty or wiring loose. Motor issues require caution - DIY repairs can get messy, so I recommend going to a professional shop to avoid wasting money and time. Prevention is key: clean your windshield during every car wash to prevent dust from damaging the blades, which can extend their lifespan significantly. If wipers fail during rain, prioritize safety - pull over immediately and wait until the rain stops rather than risking impaired visibility by driving slowly.

Was this review help?
18
5
Share
Expand All
LondynRose
09/28/25 3:54am

As a new driver, I panicked like an ant on a hot pan when my wipers stopped working during heavy rain last time. I quickly pulled over, and my friend taught me step by step: First, check if the wiper blades have any cracks or missing pieces. If so, order new ones online immediately—just a small scraper and screwdriver are needed, and you can learn how to replace them in minutes by searching for tutorials on TikTok. If the blades are intact, check the fuse—the one corresponding to the wipers in the engine compartment fuse box. If it’s blackened or broken when pulled out, replace it; it only costs a few bucks. If the wipers move but jerk, the glass might be too dirty or have an oily film—clean it with soapy water and try again. If it’s a motor issue, it’s more troublesome, and you’ll need a mechanic to replace the part, but don’t hesitate to spend the money—safety comes first. I’ve learned my lesson and now keep two spare wiper blades in the trunk, checking them before driving in the rain to avoid last-minute mishaps. Regular maintenance can handle minor fixes—don’t let small issues turn into big problems.

Was this review help?
8
3
Share
Expand All
Mabel
11/11/25 5:49am

Fixing windshield wipers isn't actually difficult. From my experience, most issues are caused by worn wiper blades or blown fuses. Simple repair method: First replace the wiper blades - they're inexpensive and quick to install. If there's still no response, check if the fuse is blown and replace it using a test light. If the fuse is fine, inspect the motor or connections. A faulty motor requires professional attention. Basic maintenance like cleaning the glass and wiper arms is crucial.

Was this review help?
19
5
Share
Expand All
CarterAnn
01/01/26 7:36am

I've been driving for half my life and always prioritize wiper safety. When they fail, don't panic—stop in a safe place to inspect. First, try replacing the wiper blades—it's cost-effective and easy to do, ensuring smooth operation. If it's a motor issue, check and replace the fuse; if that doesn't work, take it for repairs. Regular maintenance ensures safety.

Was this review help?
3
0
Share
Expand All
More Forum Discussions

What Technologies Are Integrated in Intelligent Connected Vehicles?

Intelligent connected vehicles integrate 12 technologies. Here are the details: 1. Introduction: Intelligent vehicles are enhanced with advanced sensors (such as radars and cameras), controllers, and actuators. They utilize onboard environmental perception systems and information terminals to exchange data with vehicles, roads, and pedestrians. This enables the vehicle to intelligently perceive its surroundings, automatically analyze safe and hazardous driving conditions, and reach the destination as intended by the driver, ultimately replacing human decision-making and operation in driving. The initial stage of intelligent vehicles features advanced driver assistance systems (ADAS), and when connected to networks, they become intelligent connected vehicles. 2. Technologies: Environmental perception technology; Wireless communication technology; Intelligent connectivity technology; Onboard network technology; Advanced driver assistance technology; Information fusion technology; Information security and privacy protection technology; Human-machine interface technology; High-precision mapping and positioning technology; Key technologies for heterogeneous network integration; Key technologies for traffic big data processing and analysis; Key technologies for traffic cloud computing and cloud storage.
14
1
Share

How Long After Replacing Glass Can You Apply Tint?

Depending on the quality of the glass adhesive and seasonal factors, it usually takes one to three days for the adhesive to fully cure. During this period when the adhesive is not completely dry, you should not apply window tint, although you can still drive the car. Important notes: 1. Do not wash the car within three days after replacing the windshield. Remove the fixing tape from the windshield only after three days. 2. Try to avoid driving on bumpy roads and refrain from sudden braking or rapid acceleration to prevent the windshield from shifting. 3. Do not insert parking permits or other cards into the gap between the windshield and the dashboard. 4. Avoid highway driving and keep the maximum speed below 80 km/h. 5. Do not apply tint within seven days. If the rear windshield has been replaced, do not open the windows while driving for the first three days to prevent the rear windshield from shifting due to wind pressure. 6. Before applying the tint, the technician should conduct a thorough inspection of the vehicle to ensure there are no cracks in the glass.
8
4
Share

What is the ICCID code of a car?

ICCID is the integrated circuit card identification number of the SIM card built into the car's infotainment system for telematics functions, which needs to be queried at a 4S shop. Below is the relevant introduction: 1. Composition of ICCID: The vehicle ICCID consists of 20 digits, with the encoding format as follows: XXXXXX-0MFSS-YYGXX-XXXXX. The first six digits are the operator code, which is also the unique identification number of the IC card. ICCID is used by some software as a protective measure against piracy. During user registration, a unique identification code is generated based on the computer hardware and software information where the user's software is installed. This is generally referred to as the machine code, also known as the serial number, authentication code, registration code, etc. 2. SN code: SN code is the abbreviation for Serial-Number, sometimes also called SerialNo, which is the product serial number. The product serial number is a concept introduced to verify the "legal identity of the product," used to protect the user's genuine rights and enjoy legal services; a set of genuine products corresponds to only one product serial number. Aliases: machine code, authentication code, registration code, etc. The SN code can be found on the vehicle frame. The SN code is an identification code given by the software developer to the software, similar to a person's ID number, mainly to prevent the software from being pirated by users. Users must know the serial number to use the software.
6
0
Share

How to Determine a Midway Stop in Subject Two Exam?

In the driver's license Subject Two exam, the standard for determining a midway stop is any pause of the vehicle for more than 2 seconds within the test area. Reasons for being judged as a midway stop: 1. Not slightly lifting the clutch when turning the steering wheel to the limit: Many midway stops occur during reversing into a garage, parallel parking, or making a U-turn in a narrow road when the steering wheel is turned to the limit. This happens because once the steering wheel is turned to the limit, the front wheels rotate at a very large angle, increasing driving resistance. 2. Usually controlling the speed very slowly: Students usually follow the coach's instruction to control the clutch steadily and drive slowly, which seems very stable. However, during the exam, if they encounter larger road bumps or undulations, it is very easy to stop. 3. Not pressing the brake firmly when stopping midway during a task: For example, after parking in a parallel parking space, if the first brake press does not hold the brake firmly, and the right foot naturally relaxes during subsequent actions, causing the vehicle to roll back, and then the brake is pressed again to stop, this will also be judged as a midway stop.
12
5
Share

What to Do When the Car Air Conditioner Has an Earthy Smell?

When the car air conditioner emits an earthy smell, the owner can drive the car under the sun, set the air conditioning system to the warm air mode, turn the fan to the maximum setting, and leave it for more than ten minutes with all doors and windows open. If the issue persists, it may be due to a dirty cabin air filter, which needs replacement. If necessary, the air conditioning system can also be cleaned. Here are some extended information: 1. Main reasons for odors in car air conditioners: The primary cause of odors in car air conditioners is the constant dampness in the system. In the air ducts, the interaction of hot and cold air causes water molecules in the air to condense into droplets, creating a moist environment that fosters the growth of bacteria and mold. When outside air enters the car, it first passes through the cabin air filter, where large amounts of dust, insects, leaves, and other impurities are trapped by the multi-layered filter. Over time, these trapped particles can mildew and produce unpleasant smells. 2. Air conditioning usage habits: Sometimes, odors in the air conditioner may be related to the owner's usage habits. It is recommended that owners turn off the air conditioning cooling about five minutes before reaching their destination and switch to natural ventilation. This allows the temperature inside the air conditioning ducts to rise back to normal before parking, preventing the formation of condensation due to temperature differences after parking. Keeping the air conditioning ducts dry helps prevent the growth of mold and fungi.
5
3
Share

Why is the steering wheel of the G-Class so heavy?

The increased heaviness in steering wheel rotation may be largely related to the power steering system. Here is some extended information about steering wheels: 1. Introduction: A wheel-shaped device used to control the direction of cars, ships, aircraft, etc. This new steering wheel design emerged to meet needs, introducing a gear system between the driver and wheels that operates flexibly and effectively isolates intense vibrations from the road. 2. Function: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a steering wheel with a larger diameter reduces the hand force required from the driver when turning. The steering intermediate shaft, serving as a connecting component between the steering gear and steering shaft, facilitates the standardization of steering gears, compensates for errors during manufacturing and installation, and allows for more rational installation of the steering gear and steering wheel in the vehicle.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.