How to Fix a Black Screen on the LaCrosse Display?

How to Reset the Maintenance Light on Borui?

Turn the ignition switch to the first gear, simultaneously press the OK button on the left side of the steering wheel and the answer button on the right side. After a few seconds, the maintenance interface will appear. The driving display will show the maintenance screen. You can click the maintenance reminder using the multifunction steering wheel and the buttons on both sides of the driving screen. The mileage reset button is located on the instrument panel. Below is the introduction to resetting the maintenance light on Borui: 1. Hold down the small mileage reset button without releasing it. 2. Insert the car key and turn it until the instrument lights up, then release the button, and the maintenance light will turn off. 3. There is a button on the instrument panel used to adjust the mileage. Hold this button for 2-3 seconds in idle state. 4. Once the maintenance reminder is turned off, the maintenance light reset is completed.

17

2

Share

Why is the China VI vehicle not consuming urea?

China VI vehicle not consuming urea may be due to a damaged urea pump, blocked urea pipeline, or clogged injector nozzle. Below are the relevant explanations: 1. Precautions: If a China VI vehicle is not consuming urea, or when the vehicle's malfunction indicator light is on, the SCR system may not be functioning, and this issue cannot be resolved on your own. You should immediately go to a professional 4S shop for inspection and maintenance. 2. Hazards of not adding urea: The specific hazards of not adding urea include environmental pollution. Failing to add urea to a China VI vehicle can have a significant impact on the ecological environment, which is also influenced by national laws and regulations. Damage to the SCR injection system: If urea is not used for a long time, the nozzle, pipeline, and urea pump in the SCR system may become blocked.

14

0

Share

Why does the car move forward slowly when in N gear?

The reason why the car moves forward slowly when in N gear is that when the road is flat without resistance or has a slope, the vehicle will slide slowly due to inertia, which is caused by the structure of the car itself. Therefore, when waiting at a red light, you should wait until the vehicle comes to a complete stop before shifting to N gear, and then step on the brake or pull up the handbrake to prevent the car from moving forward. An automatic transmission usually refers to the car's automatic gear-shifting mechanism. When driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L.

17

0

Share

How to Judge Gear and Speed Mismatch?

Gear and speed mismatch can be judged as follows: For example, when a car's speed basically reaches 15 kilometers per hour, it needs to shift to 2nd gear for driving. If the car is still in 1st gear when the speed reaches 20 kilometers per hour or more, it is considered a gear and speed mismatch phenomenon. Below is relevant information: 1. Car gears: Generally, automatic transmission cars have 6 gears, namely P gear, R gear, N gear, low gear S gear, and L gear. P gear is for parking, R gear is for reversing, N gear is neutral, and D gear is for driving forward. 2. Working principle: The working principle of an automatic transmission is achieved through an automatic transmission system, which can adjust gears based on the degree of the accelerator pedal and changes in vehicle speed using planetary gears.

6

0

Share

How to Activate Cruise Control on Baojun 730?

The new Baojun 730 is equipped with cruise control functionality, which can be activated when the vehicle speed reaches approximately 40 km/h. The cruise control system, abbreviated as CCS, is also referred to as speed control system, auto-drive system, etc. Below are the conditions for using cruise control: 1. In principle, cruise control should be used on highways or fully enclosed roads. On non-enclosed roads, complex traffic conditions may compromise safety. Frequent braking also makes it difficult to maintain a stable cruise control state, defeating its purpose. 2. It is prohibited in rainy or icy/snowy conditions. 3. It should be disabled on mountain roads or roads with excessive curves. Normally when exiting a curve, appropriate acceleration is needed to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed with throttle controlled by the onboard computer, which can be dangerous when navigating curves. Under such conditions, vehicle speed should be manually controlled. 4. Cruise control is also unsuitable for roads with heavy traffic.

3

5

Share

Failed the Driving Test (Subject 3) Four Times, How to Find a Way to Pass?

The most reliable approach is to practice more and pay close attention to the vehicle's movement path and the sense of steering direction. Practice makes perfect, and naturally, you will pass the test. Below is a partial introduction to Subject 3: 1. Subject 3 Content: Includes the road driving skills test and the safety and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of driving licenses. 2. Road Driving Skills Test for Subject 3: The content generally includes preparation before getting on the car, simulated lighting test, starting, driving straight, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and driving at night.

3

2

Share

How to Fix a Black Screen on the LaCrosse Display?

How to Reset the Maintenance Light on Borui?

Why is the China VI vehicle not consuming urea?

Why does the car move forward slowly when in N gear?

How to Judge Gear and Speed Mismatch?

How to Activate Cruise Control on Baojun 730?

Failed the Driving Test (Subject 3) Four Times, How to Find a Way to Pass?

What is BFGoodrich Tire?

How to Remove the Transmission of Great Wall Haval H6?

How many liters of brake fluid does the Roewe i6 require?

What to Do When an Automatic Transmission Car Fails to Start Due to Dead Battery?