How to Fix a Black Screen on the Civic Display?

1 Answers
AlanFitz
07/29/25 5:31pm
If the central control screen goes black and stops lighting up, you can first try restarting the screen by turning the ignition on and off. Promptly check whether there are any loose connections in the wiring. If found, simply reconnect the loose parts properly. You can also try replacing it with a new one. If the black screen issue is resolved, it indicates that the power signal cable is indeed faulty.
Was this review help?
20
1
Share
More Forum Discussions

Does Tesla Have Only One Pedal for Both Brake and Accelerator?

Tesla does not have only one pedal; it is equipped with two standard pedals, namely the brake and accelerator, as a conventional vehicle. However, Tesla promotes and features a "One-Pedal" mode, which guides drivers to use the accelerator pedal for both acceleration and deceleration, releasing the pedal to slow down and recover kinetic energy. Here is an introduction to Tesla's single-pedal operation for braking and acceleration: 1. Introduction One: The "One-Pedal" mode utilizes the braking effect of kinetic energy recovery to achieve deceleration. Under the kinetic energy recovery system of electric vehicles, the vehicle harnesses the inertia during deceleration to drive the motor for power generation, thereby slowing down the vehicle. Driving under kinetic energy recovery means releasing the accelerator pedal will result in a deceleration process similar to applying the brakes. 2. Introduction Two: The single-pedal logic is designed to save costs by avoiding the calibration of brake kinetic energy recovery. Instead, it risks operational errors by using the single-pedal logic for kinetic energy recovery, forcing drivers to adapt to this method, which contradicts the operational logic of conventional cars developed over a century.
20
0
Share

Is the Kia K2 transmission AT or CVT?

The Kia K2 transmission is an AT, specifically a 6-speed automatic transmission with manual shift mode. The manual shift mode is essentially a traditional AT or CVT transmission with added manual shifting functionality. The purpose of the manual shift mode is to enhance the driving pleasure of automatic transmission vehicles. The Kia K2 transmission is a Hyundai brand product, manufactured by the Hyundai Kia Automotive Group. The Hyundai Kia Automotive Group is effectively represented by Hyundai Motor Company, with its predecessor being the Hyundai Motor Group. The Hyundai Kia Automotive Group is the world's fifth-largest automobile manufacturer by production volume. When using the Kia K2 transmission in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can lead to damage to internal components such as bearings and the transmission casing. Avoid prolonged coasting in neutral. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back to D (Drive) mode. Never shift into D (Drive) or R (Reverse) before the vehicle has come to a complete stop. Many drivers, aiming to demonstrate smooth operation, may shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and, over time, lead to gear grinding and other malfunctions. Avoid frequently using D (Drive) mode for steep uphill climbs. When navigating steep inclines, automatic transmission vehicles may overheat due to high load or may upshift prematurely, resulting in insufficient power for the climb. In such cases, using manual mode to lock in a lower gear or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in N (Neutral) mode, rather than being towed directly with a tow rope or similar method.
3
1
Share

What is the fuel consumption of the Trumpchi M6?

Trumpchi M6 fuel consumption: 7.1-7.5L. Below is the relevant introduction: 1. Trumpchi M6: The Trumpchi M6 is a compact MPV under GAC Motor. Manufacturer: GAC Motor. Class: Compact MPV. Fuel consumption: 7.1-7.5L. Displacement: 1.5T. 2. Model series: 2021 270T Manual Elite Edition (7-seater), 2021 270T Automatic Elite Edition (7-seater), 2021 270T Automatic Luxury Edition (6-seater), 2021 270T Automatic Luxury Edition (7-seater), 2021 270T Automatic Premium Edition (7-seater), 2021 270T Automatic Premium Edition (6-seater), 2021 270T Automatic Honor Edition (7-seater), 2021 270T Automatic Honor Edition (6-seater), 2021 270T Automatic Noble Edition (7-seater), 2021 270T Automatic Noble Edition (6-seater).
14
0
Share

What are the differences between Mitsubishi Lancer and Soueast Lancer?

The main difference between Mitsubishi Lancer and Soueast Lancer lies in their manufacturers - one is domestically produced while the other is imported. Their engines are quite similar, with only minor modifications in some areas. However, both are older models with relatively cramped interiors. Here are the key differences between Mitsubishi Lancer and Soueast Lancer: 1. Difference one: There is only Soueast Lancer, which was assembled by Soueast using Mitsubishi parts. However, due to technical and craftsmanship limitations, the vehicle's performance and quality were subpar, failing to fully utilize the Mitsubishi engine's capabilities. Moreover, since the design wasn't provided by Mitsubishi, the company never acknowledged any association between this model and the Mitsubishi brand, fearing it might damage Mitsubishi's brand reputation. 2. Difference two: Soueast once replaced its logo with Mitsubishi's to attract customers, which angered Mitsubishi. Consequently, Soueast stopped using Mitsubishi's emblem and reverted to its own logo. However, if buyers requested it, Soueast would assist in changing the logo, as the responsibility would then lie with the consumer rather than Soueast.
17
2
Share

What does Audi AUX mean?

AUX is an audio input interface. The basic working principle of the AUX interface is that after connecting to the AUX interface, the audio in electronic products can be connected to the car audio through the headphone jack and AUX interface, and the audio can be played in the car audio broadcasting facilities. The USB interface can be inserted into a USB flash drive to play audio. When using it, insert one end into the AUX interface and connect the other end to a video player such as a mobile phone, MP3, or MP4. This allows you to listen to songs or niche music anytime and anywhere, not limited to car music CDs. However, if the playback device runs out of power, the music will also stop (the interface is generally a 3.5mm labeled headphone jack). Aux is the abbreviation of Auxiliary, which is an additional signal line design. In general audio equipment, in addition to the official output and input terminals, there are often several output and input terminals labeled Aux as spare connection terminals. When there are special applications, such as additional sound output or input, this type of terminal can be used. These spare terminals or lines, whether for input or output, are collectively called Aux. Function: The AUX port is an asynchronous port, mainly used for remote configuration, dial-up connections, and can also be connected to a MODEM through a transceiver. It supports hardware flow control. The AUX port and CONSOLE port are usually placed together because their respective applicable configuration environments are different. The AUX interface establishes a command-line connection between the user and the device, enabling some operations that are usually impossible in user mode, such as initialization, restoring the initial configuration, and correcting abnormal user modes. It provides a fixed port for the device, which can be used as an ordinary asynchronous serial port with a maximum speed of 115200bit/s. Using the AUX interface, remote configuration and line backup of hardware products can be achieved. Note: When using the AUX interface, pay attention to buying the correct connecting cable and ensure that the audio cable is not inserted into the wrong port. It is best to follow the steps in the product's user manual when using the AUX interface. If you still don't understand, you can consult the product's official website or call for assistance.
14
5
Share

Is it normal to add coolant once a year?

It is not normal. Coolant is generally replaced every two years or every 40,000 kilometers driven. Properly replacing the car coolant can provide better protection while driving. When replacing, the old coolant should be completely drained, the cooling system should be thoroughly cleaned, and then new coolant should be added. It is recommended to go to a professional 4S shop for replacement. Precautions for using car coolant: 1. Use coolant year-round: During vehicle use, it is important to use coolant consistently throughout the year, maintaining continuity in its use. Many car owners only think of using coolant in winter, which is a very mistaken idea. They only know about the antifreeze function of coolant but overlook its anti-corrosion, anti-boiling, and anti-scaling effects. 2. Choose coolant based on the environment: Car owners should select coolant with different freezing points according to their daily driving environment. The freezing point of the coolant should be at least 10°C lower than the lowest temperature in the region to avoid losing its antifreeze effect and affecting normal vehicle use. 3. Do not mix coolants: When adding car antifreeze, coolants of different brands and properties should not be mixed to prevent chemical reactions that could damage their comprehensive anti-corrosion capabilities. Leftover coolant should be labeled on the container to avoid mistakes during use. 4. Understand the properties of coolant: Car owners need to understand the properties of the coolant when purchasing it. If purchasing concentrated coolant, such as ethylene glycol-based concentrated coolant, an appropriate amount of pure water can be added in proportion to prepare coolant suitable for the local temperature conditions.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.