How to Find the Owner When You Need to Move a Parked Car?

1 Answers
Freddy
07/30/25 12:36am
Here are the ways to contact the car owner when you need to move a parked car: 1. If the other car owner hasn't left a contact number on the vehicle, you can call 122 and inform the operator that your car is blocked and you need the owner to come and move their car. Provide the operator with detailed location and vehicle information, such as the license plate number, color, and model. 122 will then call the owner to request them to move the car. 2. If the other car owner hasn't left a contact number on the vehicle, you can also call the insurance company using the insurance sticker on the car, and ask the staff to help connect you to the owner's phone to request moving the car. 3. If the other car owner hasn't left a contact number on the vehicle, you can also call 114, provide the license plate number and location of the car that needs to be moved, and 114 will transfer the call to the owner.
Was this review help?
16
4
Share
More Forum Discussions

Is it necessary to clear the points before the annual inspection?

It is necessary to clear the points before the annual inspection. According to regulations, if the driver's license has been penalized with points and the violations have not been addressed, the vehicle cannot undergo the annual inspection. Even if the vehicle passes the inspection, the DMV's computer system will not be able to print the inspection compliance label. Impact of unpaid fines: For a C1 driver's license, as long as the points do not accumulate to 12 within one scoring cycle, the points will be reset to zero once the fines are paid within that cycle, and this will not affect the renewal (inspection) of the driver's license. However, if the fines are not paid within the current scoring cycle, the points will carry over to the next cycle. If this coincides with the inspection period, it will affect the driver's license inspection. Driver's license annual inspection: Generally, the annual inspection checks for any violations. If there are points deducted, they must be cleared before passing the annual inspection. Secondly, a proof of qualified physical condition (medical examination form) must be submitted.
20
1
Share

What is the Structural Principle of a Booster Cylinder?

The structural principle of a booster cylinder involves manually pressurizing (via a hydraulic hand pump) to allow hydraulic oil to enter the cylinder through a one-way valve. Once inside, the hydraulic oil cannot flow back due to the one-way valve, forcing the piston rod upward. The process continues as more hydraulic oil is pumped into the cylinder. Booster Cylinder: Designed by combining the advantages of pneumatic and hydraulic cylinders, the booster cylinder strictly isolates hydraulic oil from compressed air. The piston rod inside the cylinder automatically initiates contact with the workpiece, offering fast operation and more stable performance compared to pneumatic systems. It features a simple cylinder structure, easy force adjustment, and can achieve high output similar to hydraulic presses under the same conditions. Additional benefits include low energy consumption, soft landing to protect molds, easy installation, and the ability to mount special booster cylinders at any 360-degree angle. It occupies minimal space, has fewer faults, no temperature rise issues, long lifespan, and low noise, among other core characteristics. Booster Cylinder Types: Pre-pressurized booster cylinder, direct-pressurized booster cylinder, stroke-adjustable booster cylinder, increased return-stroke booster cylinder, compact parallel booster cylinder, mini booster cylinder, high-speed booster cylinder, and oil-gas isolated booster cylinder.
15
0
Share

What is the minimum speed for cruise control?

The minimum speed for cruise control is 40 kilometers per hour. Steps to set cruise control: Press the "On/Off" button, then briefly press the "-Set" button, and the car will enter cruise control mode. Simply hold the steering wheel, and you can release the accelerator and brake pedals. The speed will be maintained at the set speed. Deceleration and acceleration: To decelerate while maintaining cruise control, press the "-Set" button, and the speed will decrease in increments of 1.6 km/h until the button is released. Note that the speed cannot drop below 40 km/h during cruise control. To accelerate while maintaining cruise control, press the "+Resume" button, and the speed will increase in increments of 1.6 km/h. Note that after reaching the desired speed, you must briefly press the "-Set" button to complete the setting. Canceling cruise control: In cruise control mode, pressing the brake to decelerate or the accelerator to accelerate will cancel the cruise control. To reset it, press the "-Set" button again.
7
4
Share

What does TCS mean in cars?

TCS in cars stands for Traction Control System, also known as the Track Control System. When driving on slippery surfaces, cars without TCS may experience wheel spin during acceleration. If it's the rear wheels, this can lead to fishtailing. Its functions include improving traction and maintaining driving stability. The TCS device is a computer that monitors the speed of all four wheels and the steering wheel angle. During acceleration, if it detects a significant speed difference between the driving wheels and non-driving wheels, the computer immediately determines that the driving force is excessive and sends a signal to reduce the engine's fuel supply, thereby decreasing the driving force and reducing the slip rate of the driving wheels.
14
4
Share

What material is the inner tube of a motorcycle front shock absorber?

The material of the inner tube of a motorcycle front shock absorber is aluminum alloy and steel. Shock Absorber: The shock absorber is mainly used to suppress the oscillation after the spring absorbs the shock and rebounds, as well as the impact from the road surface. When passing over uneven road surfaces, although the shock-absorbing spring can filter out the vibrations from the road, the spring itself will still have reciprocating motion. The shock absorber is used to suppress this spring bouncing. Spring Stiffness: If the shock absorber is too soft, the vehicle body will bounce up and down. If the shock absorber is too hard, it will create too much resistance, hindering the normal operation of the spring. During the modification of the suspension system, a hard shock absorber should be paired with a hard spring. The stiffness of the spring is closely related to the vehicle weight, so heavier vehicles generally use harder shock absorbers. The device connected to the vibration-damping crankshaft is used to counteract the torsional vibration of the crankshaft (i.e., the phenomenon where the crankshaft twists due to the impact force of the cylinder ignition).
14
4
Share

What does the exclamation mark on the car dashboard indicate?

There are three scenarios when an exclamation mark appears on the car dashboard: 1. A yellow triangle with an exclamation mark in the middle, which is the traction control indicator (also known as the ground adhesion control system indicator). When this light illuminates, it reminds the driver to turn off the traction control system. 2. A yellow bracket with an exclamation mark in the middle, which is the tire pressure monitoring indicator. This light indicates insufficient tire pressure. 3. A yellow gear with an exclamation mark in the middle, which is the automatic transmission fault warning light. It indicates a transmission malfunction, transmission lubricant level below normal range, or the need for lubricant replacement. The dashboard is a rigid panel or structural component used to install instruments and related devices. It can be categorized by type into screen-type dashboards, frame-type dashboards, passage-type dashboards, and cabinet-type dashboards.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.