How to Find the Owner When You Find a License Plate?

2 Answers
VanChase
09/08/25 6:13am
Take the license plate to the local vehicle management office or traffic police bureau service hall to have the staff confirm that you found the license plate. The staff will search for the owner online and contact them to retrieve the license plate.
Was this review help?
15
2
Share
Kingston
09/20/25 4:48am
My first thought when finding a license plate was that the owner must be extremely anxious. I remember picking up a license plate last year and immediately taking it to the nearest traffic police station. The officers could easily retrieve the owner's information through their system using the plate number - it's both secure and efficient. Handing it over to the authorities is definitely the best approach; never attempt to investigate or make random calls yourself, as it not only violates privacy but could also lead to trouble. While some community groups or apps might allow you to post about it, they're not as reliable as the traffic police. If the plate falls into the wrong hands and gets misused, it would be terrible, so it's best to deal with it quickly - helping out gives peace of mind. Such small acts reflect social responsibility, and the grateful look in the owner's eyes when they get it back makes everything worthwhile.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

What Causes Vehicle Vibration at 120 km/h?

The causes of vehicle vibration at 120 km/h are: 1. Uneven brake disc surface with excessive radial runout; 2. Rim deformation; 3. Excessive high or low tire pressure; 4. Significant wheel alignment data deviation; 5. Abnormal tire wear; 6. Tire dynamic balance failure; 7. Damper failure; 8. Engine power failure. The solutions for vehicle vibration at 120 km/h are: 1. Inspect and adjust front wheel alignment angles and toe-in; 2. Perform wheel dynamic balance inspection; 3. Adjust tire pressure or replace tires; 4. Perform driveshaft dynamic balance inspection; 5. Choose high-quality engine oil; 6. Inspect engine ignition system.
8
5
Share

How Many Liters of Oil Does the Camry Transmission Need?

The amount of transmission oil required for a Camry depends on the oil change method: 1. Approximately 6 liters for conventional gravity oil change; 2. Around 12 liters for machine exchange oil change. The Camry is a mid-size sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60 liters, and trunk capacity 593 liters. It is equipped with a 2.0L naturally aspirated engine producing maximum power of 131kW at 6600rpm and peak torque of 210Nm between 4400-5200rpm, paired with a 10-speed continuously variable transmission.
4
1
Share

How to Determine if a Solenoid Valve is Damaged?

Determining whether a solenoid valve is damaged can be done through the following methods: 1. After energizing the coil, insert a metal tool directly into the coil hole and check if the metal tool can be attracted; 2. Measure the resistance of the coil with a multimeter. If the resistance shows infinity or is very small, it can be determined that the valve is damaged. A solenoid valve is an electromagnetically controlled industrial device used as an automated basic component for controlling fluids. It belongs to the category of actuators and can work with different circuits to achieve the desired control, ensuring precision and flexibility. Solenoid valves can be classified into: 1. Direct-acting solenoid valves; 2. Step-by-step direct-acting solenoid valves; 3. Pilot-operated solenoid valves.
5
5
Share

What Does Tire Size Represent?

Tire size represents the section width and the aspect ratio as a percentage, followed by the tire type code, rim diameter, load index, and speed rating. Taking 175/70R14 77H as an example, 175 indicates the tire width is 175mm, 70 means the tire's aspect ratio is 70%, the rim diameter is 14 inches, the load index is 77, and the speed rating is H. The method to measure tire size is: 1. Use a metal tape measure to wrap around the tire along the centerline of the tread or the highest point near the centerline to measure the outer circumference; 2. Select a sidewall area without markings, decorative lines, or scuff guards, and use a vernier caliper or calipers to measure the section width at approximately four equally spaced points around the tire; 3. Calculate the data accordingly.
7
2
Share

What is the situation with the car tire pressure warning?

Car tire pressure warning occurs due to the following reasons: 1. Air leakage from the tire or valve; 2. Wheel hub deformation leading to reduced tire sealing performance; 3. Long-term overloading of the vehicle causing uneven tire stress; 4. Thermal expansion and contraction resulting in insufficient tire pressure. Tire pressure refers to the air pressure inside the tire, with a normal monitoring range between 2.2 and 2.5 bar. Methods for monitoring tire pressure include: 1. Direct tire pressure monitoring; 2. Indirect tire pressure monitoring; 3. Using a smart tire monitoring system for detection. The impacts of low tire pressure are: 1. Increased contact area between the tire and the ground, leading to abnormal tire temperature; 2. Severe deformation of the tire sidewall, accelerating the aging of internal steel wires and fabric layers, which may cause a blowout; 3. Increased fuel consumption; 4. Reduced tire lifespan.
9
1
Share

What are the normal high and low pressures for a car air conditioner?

The normal high pressure for a car air conditioner is between 15 to 18 bar, and the low pressure is between 1.0 to 2.5 bar. Solutions for excessively high pressure in the car air conditioner include: 1. Clean the dust and dirt from the air vents and the interior of the cabin; 2. Regularly check the refrigerant level in the air conditioning system to ensure it is normal; 3. Inspect the compressor belt for proper condition; 4. Check if the refrigerant level is sufficient and replenish it in time. Solutions for excessively low pressure in the car air conditioner include: 1. Refill the air conditioning refrigerant according to the manufacturer's standards; 2. Inspect and repair any leaks in the air conditioning system, replacing any leaking components.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.