How to Find the Owner's Phone Number Through the License Plate Number?

2 Answers
Athena
07/24/25 1:17am
You can find the owner's phone number through the license plate number, but it involves the owner's personal privacy. Generally, the traffic police department or vehicle management office will not assist in the search. The license plate number is the identification plate of the vehicle. Here is some relevant information: 1. The vehicle license plate number is a legal mark registered by the statutory authority, permitting the vehicle to drive on the road. It is the identification number of the vehicle and is usually hung in a specific position of the motor vehicle. The first character of the license plate is a Chinese character, representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality, or autonomous region). 2. In principle, each prefecture-level administrative division in China occupies a license plate code. However, since each prefecture-level administrative division in China is divided into different districts, counties, or cities, different number segments are adopted to distinguish them on the license plate.
Was this review help?
9
1
Share
EloiseRose
08/10/25 8:54pm
When I worked as a mediator in the community, I often dealt with minor vehicle scrape disputes. Looking up a car owner's phone number via license plate is considered a privacy violation—the official 122 police platform is the legal channel. If contact information wasn't exchanged after an accident, it's advisable to first report it to the police for documentation; traffic police can contact the other party through their system. For routine parking blockages, calling 114 for vehicle relocation service is recommended—they relay the call to the owner without disclosing the number. Nowadays, the Traffic Management 12123 App also features a 'One-Tap Relocation' function where uploading a photo can anonymously notify the car owner.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

Timing Belt Installation Method?

1. Align the timing mark on the camshaft timing gear with the mark on the valve cover. 2. Align the timing mark on the crankshaft timing gear with the mark on the front cover. 3. Install the timing belt in sequence. 4. Loosen the pulley and install the bolt 1/4-1/2 turn. Compress the automatic tensioner pushrod to the lowest position, insert a steel pin into the hole, adjust the pulley with a snap ring pliers, rotate counterclockwise to make the two adjustment holes of the pulley parallel to the ground, tighten the fixing bolt, and pull out the steel pin. 5. Rotate the crankshaft clockwise for 2 turns and check whether the timing marks are correctly aligned. 6. Turn back the engine, install the lower outer timing belt cover, and the upper outer timing belt cover. 7. Reinstall the generator and air conditioning compressor belts. 8. Check the engine for any abnormalities.
2
4
Share

Will not scrapping an expired motorcycle affect the driver's license?

For motorcycles that have not reached the national mandatory scrapping standard, failure to scrap and deregister them will not affect the driver's license. However, for motorcycles that have reached the national mandatory scrapping standard, failing to deregister them as required is a violation of the law and will affect the driver's license renewal and inspection. Motorcycle scrapping period: The national regulation stipulates that the service life of a two-wheeled motorcycle is 10 years, which can be extended for 3 years. During the 3-year extension period, an inspection is required every six months, and the extension can only be granted after passing the inspection. After 13 years, the motorcycle must be mandatorily scrapped. Motorcycle scrapping criteria: Vehicles that are severely damaged and cannot be repaired, or those that still fail to meet the national motor vehicle safety technical requirements after repair and adjustment, or those whose exhaust pollutants or noise still exceed national or local emission standards after repair, adjustment, or the use of emission control technology, must be scrapped.
12
2
Share

What are the trunk dimensions of the Vision X6?

The trunk capacity of the Vision X6 is 1850L, with a minimum depth of 870mm, maximum depth of 1820mm, width ranging from 940-1300mm, and height of 765mm. Below are some details about this vehicle: 1. Body dimensions. The new Vision SUV maintains the same dimensions as the previous generation, with a length of 4500mm, width of 1834mm, height of 1707mm, and a wheelbase of 2661mm. 2. Powertrain. It is equipped with a new 1.4T turbocharged engine, delivering a maximum power of 98kW and maximum torque of 215N·m, paired with a CVT transmission (simulating 8 speeds). The manual version features a 1.8L engine combined with a 5-speed manual transmission. The new model also adopts an electronic parking brake design and supports AUTOHOLD functionality.
2
2
Share

What engine does the Fengshen L60 have?

Fengshen L60 comes with two engine options: a 1.6L naturally aspirated engine with the code name NFP and a 1.8L naturally aspirated engine with the code name WFZ. Here is more information about the Fengshen L60: 1. The Fengshen L60 features a dual-horizontal slat front grille, with wedge-shaped headlights integrated into the front grille. The rear design of the vehicle appears conventional. The dimensions of the Fengshen L60 are 4712mm in length, 1820mm in width, 1540mm in height, with a wheelbase of 2710mm. 2. The Fengshen L60 is equipped with a 1.6L and a 1.8L engine, where the 1.6L engine delivers a maximum power of 117 horsepower and the 1.8L engine produces a maximum power of 139 horsepower.
10
1
Share

Do You Need to Press the Clutch When Shifting to D Gear in a Manual Transmission?

Do You Need to Press the Clutch When Shifting to D Gear in a Manual Transmission. Reasons for Pressing the Clutch: For manual transmission vehicles to drive smoothly, the importance of the clutch cannot be overlooked. While driving, except for starting the car, shifting gears, and low-speed braking, which require pressing the clutch pedal, the clutch should not be pressed unnecessarily at other times. Gradually press the accelerator pedal according to the engine's resistance to ensure a smooth start. Clutch Usage Precautions: Before installation, the clutch must be thoroughly cleaned to remove anti-rust grease and debris. The clutch can be installed coaxially or on separate shafts. The axial direction must be fixed, and neither the driving part nor the driven part should have axial movement. When installed on separate shafts, the coaxiality between the driving part and the driven part shafts should not exceed 0.1mm.
19
1
Share

How to Deal with a Stuck Gear in a Manual Transmission Car While Driving?

If the gear gets stuck while driving, you should first slow down, then press the clutch pedal and pull over to stop and turn off the engine. Next, check whether the transmission, clutch, etc., have malfunctioned. If necessary, you can call for a tow truck to take the car to a repair shop for inspection. Below are the reasons for a stuck gear: 1. The principle of a manual transmission is very simple. There is a synchronizer inside the manual transmission, and there is a shift fork under the gear lever, which is connected to the synchronizer. When shifting gears, the synchronizer is used to select the gear, the shift fork controls the synchronizer, and the gear lever controls the shift fork. If the shift fork or synchronizer has a problem, it may cause the gear to get stuck. 2. When shifting gears, you must ensure that the clutch is fully depressed; otherwise, you cannot shift gears. If there is a problem with the clutch pedal, even if the clutch pedal is fully depressed but the clutch is not completely disengaged, it can also cause the gear to get stuck.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.