How to Find the BYD Rearview Mirror Heating Switch?

How to Check the Wear Level of Brake Pads?

Methods to check the wear level of brake pads: 1. Check the thickness: The thickness of the brake pads significantly affects braking performance. Generally, new brake pads are about 1.5 cm thick. When the thickness wears down to approximately 0.3 cm, it's time to pay attention. 2. Dashboard warning: Many modern cars have a warning system. If there's an issue with the brake pads, the brake warning light on the dashboard will illuminate, prompting the owner to inspect the brake pads promptly to determine if replacement is needed. 3. Sound: Car brake pads are typically made of iron. If unusual noises occur during braking and persist for a long time, the owner should inspect the brake pads immediately. 4. Braking performance: For experienced drivers, the braking performance can provide an indication of the brake pads' wear. If braking effectiveness is poor during operation or if the pedal feels noticeably lower during emergency braking, it suggests that the brake pads are severely worn and need to be replaced promptly.

20

5

Share

When is the National Day highway toll-free period?

The National Day highway toll-free period is from 0:00 on October 1st to 24:00 on October 8th. For ordinary toll roads, the toll-free status is determined by the time when the vehicle passes through the toll station or toll lane, while for highways, it is determined by the time when the vehicle exits the toll lane at the highway exit. Additionally, the toll-free vehicles are limited to passenger vehicles with fewer than 7 seats traveling on toll roads, including motorcycles allowed on ordinary toll roads. For example, if you enter the highway at 21:00 on September 30th and exit at 1:00 on October 1st, the entire trip is toll-free. However, if you enter the highway at 23:00 on October 8th and exit at 0:05 on October 9th, exceeding the 24:00 deadline, the entire trip will be charged.

19

5

Share

How to Report Traffic Violations?

Methods for reporting traffic violations are: 1. Call 122 or 110 to report. For the convenience of traffic police in gathering evidence, it is best to report before or during driving; 2. Report to the local traffic management department of the driver and vehicle's registered residence. It is advisable to provide photos of the traffic violation when reporting, as this will assist the traffic management department in investigation and verification. It is very important to obey traffic rules while driving. According to the "Guidance on Handling Traffic Violations Based on Traffic Technical Monitoring Records" issued by the Traffic Management Bureau of the Ministry of Public Security, the records provided by the public, after strict review and meeting the evidence requirements, can be entered into the comprehensive application platform of public security traffic management as violation information.

5

2

Share

What is the Volkswagen with letters?

Volkswagen models with letters include: Phaeton, Phideon, Touareg, Teramont, and the 2018 Volkswagen Passat. The lettering on the Phaeton's rear is PHAETON, the Phideon's rear lettering is PHIDEON, the Touareg's rear lettering is TOUAREG, the Teramont's rear lettering is TERAMONT, and the 2018 Volkswagen Passat's rear lettering is PASSAT. Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany. The VW in its logo stands for the first letters of its full name, resembling three 'V's made with the middle and index fingers, symbolizing the company and its products' victory.

10

5

Share

How often should wheel alignment be done?

There is no strict rule on how often wheel alignment should be performed. Generally, it is done only when issues are detected or when the vehicle shows signs of deviation. Wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure good driving performance and reliability. It primarily targets the suspension system, adjusting various arms and tie rods to influence the angle and position of the wheel hubs. Commonly adjusted parameters include front wheel toe-in, camber, rear wheel toe-in, and caster angle. If the car does not deviate or show uneven tire wear, wheel alignment is unnecessary.

3

Share

What is the method to manually clear the ABS warning light?

Method to manually clear the ABS warning light: Locate the car's battery, remove the negative terminal, wait a few minutes, and then reconnect it. The ABS warning light should then turn off. Reasons for the ABS warning light to illuminate include: 1. The brake fluid level in the brake fluid reservoir is below the lower limit, triggering the brake fluid level indicator switch; 2. Poor contact or damage to the parking brake switch or brake fluid level indicator switch; 3. Poor contact or short circuit in the ABS warning light's wiring; 4. Fault in the ABS system's ECU or its power circuit; 5. Intermittent fault in the wheel speed sensor or its wiring; 6. Failure of the brake pressure sensor or poor contact/short circuit in its wiring; 7. Air in the conventional brake system or other faults.

16

1

Share

How to Find the BYD Rearview Mirror Heating Switch?

How to Check the Wear Level of Brake Pads?

When is the National Day highway toll-free period?

How to Report Traffic Violations?

What is the Volkswagen with letters?

How often should wheel alignment be done?

What is the method to manually clear the ABS warning light?

What type of gasoline should be used for Nissan Sylphy?

How to Operate an Automatic Transmission Gear Shift?

What is the Tire Pressure Warning Symbol?

What to Do When the Car's Chassis Makes a Loud Impact Noise?