How to Find the 30cm Mark for Stopping on a Slope in Subject 2?

What does Hill Descent Control mean in cars?

Hill Descent Control (HDC), also known as the slope control system, is primarily designed to maintain a low vehicle speed and ensure tire traction when driving down steep slopes, allowing the car to safely reach the flat ground at the bottom. Once the HDC function is activated, the driver can release all pedals and focus solely on steering. More details are as follows: 1. HDC mainly works by combining engine braking with the ESP and ABS systems. When HDC is engaged, the transmission remains in first gear, utilizing engine braking to keep the speed within a low range. If the slope is extremely steep and engine braking alone cannot control the speed, the ESP and ABS systems will work together to perform high-frequency "pulse braking," smoothly reducing the vehicle speed to a safe range. 2. HDC has become a standard feature in many off-road vehicles and urban SUVs, helping drivers navigate dangerous steep mountain roads by allowing them to concentrate on steering without worrying about sliding or rollover risks. 3. Using HDC is very simple: just activate the HDC switch before descending a steep slope, then release the accelerator and brake pedals, and the system will start working. The HDC function will immediately deactivate if the brake or accelerator pedal is pressed.

17

4

Share

Is It Allowed to Make a U-Turn at a Red Light?

If the U-turn signal light is red, you must wait; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this offense carries a penalty of 6 demerit points and a fine of 200 yuan. If there is no U-turn signal light, a dashed line at the gap allows U-turns without being affected by traffic signals or crossing the pedestrian crossing. However, if the gap has a solid line, making a U-turn requires crossing the pedestrian crossing and is subject to the left-turn signal light. Making a U-turn directly may result in being photographed or penalized by on-site traffic police. When making a U-turn by crossing the pedestrian crossing, yielding to pedestrians is required: Pedestrians walking on the right side of the road's crosswalk who have not reached the centerline. Vehicles on the left side of the road should slow down and proceed only when it is safe to do so. Pedestrians waiting outside the boundary line between motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and proceed only when safe. If pedestrians cross the boundary line between motorized and non-motorized lanes, vehicles failing to stop and yield are committing a violation and should be penalized. When pedestrians enter the motorized lane via the crosswalk, vehicles in the adjacent lane must slow down and proceed only when safe. Failing to stop and yield is a violation and should be penalized. Pedestrians waiting at the road centerline without entering the motorized lane. Vehicles failing to stop and yield are committing a violation and should be penalized. Pedestrians crossing the centerline into the motorized lane. Vehicles failing to stop and yield are committing a violation and should be penalized. When the road is divided by a green belt, and pedestrians are waiting in the central stopping area, vehicles must slow down and proceed only when safe. Cases where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign, U-turns are permitted. If there is a U-turn signal light, follow its instructions. Without a signal light, make the U-turn based on the situation, ensuring it does not hinder other vehicles or pedestrians. Intersections without explicit "No U-turn" or "No Left Turn" signs: U-turns are allowed if there are no prohibitions. "No explicit prohibition" means the intersection lacks "No U-turn" or "No Left Turn" signs, and the centerline is not solid. Yellow grid lines also permit U-turns: Yellow grid lines indicate no-stopping zones at intersections prone to congestion, important entrances, or other designated areas. Stopping on these lines (including waiting at traffic lights) is a violation. However, U-turns are allowed in yellow grid zones unless there is a central barrier. Intersections with U-turn signal lights: If present, follow the signal—U-turns are allowed only on green. When "No Left Turn" and "U-turn Allowed" signs coexist: U-turns are permitted, but left turns are prohibited. Note that "No U-turn" does not equate to "No Left Turn." Precautions when making U-turns at intersections: Check road markings—solid lines prohibit U-turns under any circumstances. Continue driving to find a suitable spot. If there is a "No Left Turn" sign, even without a "No U-turn" sign, U-turns are not allowed at that intersection, as U-turns inherently involve left-turning movements. U-turns must be made from the innermost left-turn lane. If in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to straight-moving vehicles before making a U-turn. Interfering with straight traffic makes you fully liable for any accidents. Near intersection stop lines, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow—some have straight arrows. Even without explicit "No U-turn" signs, U-turns are prohibited in such lanes.

17

0

Share

Spark Plug Composition Structure?

Spark plugs are mainly composed of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. What is a spark plug: A spark plug is a crucial component in the ignition system of a gasoline engine. It introduces high-voltage electricity into the combustion chamber, causing it to jump across the electrode gap and generate a spark, thereby igniting the combustible air-fuel mixture in the cylinder. What does a spark plug consist of: Spark plugs are primarily made up of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. How does a spark plug work: Under high voltage, the air between the center electrode and side electrode of a spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties and forming a discharge channel in the gap, resulting in a "breakdown" phenomenon. At this point, the gas becomes a luminous body, known as a "spark." Along with the heat and expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach as high as 2000-3000°C, sufficient to ignite the air-fuel mixture in the cylinder's combustion chamber.

19

1

Share

What is the pressure of a car air conditioner?

The normal high pressure of a car air conditioner should be between 1.3 to 1.7 MPa (13 to 17 kg per square centimeter or 190 to 250 Lbf), and the normal low pressure should be between 0.15 to 0.25 MPa (1.5 to 2.5 kg per square centimeter or 20 to 35 Lbf). The car air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower. These components are connected by copper pipes (or aluminum pipes) and high-pressure rubber hoses to form a closed system. During operation, the refrigerant circulates in different states within this closed system, with each cycle comprising four basic processes. Car air conditioner maintenance methods: Comprehensive inspection of the air conditioner: When using the air conditioner for the first time in summer, you should first check the air conditioning system, such as inspecting the refrigerant and whether the air filter is too dirty through the liquid storage tank, and whether there are foreign objects on the radiator. Pay attention to the cleaning of the air conditioner: The air filter should be replaced regularly. Due to the high amount of sand and dust in spring, these can accumulate on the filter, promoting bacterial growth and causing a musty smell in the air conditioner. Additionally, the condenser should be cleaned periodically, and the water tank should be removed for thorough cleaning.

11

4

Share

When to Use the Central Differential Lock?

When driving through muddy roads, the differential lock can be used. With the vehicle stationary, depress the clutch pedal and press the inter-axle differential lock switch in the cab. Once the inter-axle differential is engaged, the differential lock indicator light will illuminate. In extremely poor road conditions, using both the inter-axle differential lock and the inter-wheel differential lock simultaneously can make passage easier and more manageable. Introduction to Central Differential Locks: 1. Forced Locking Type: This type is equipped with a differential lock on a conventional symmetrical differential. It features a simple structure, is easy to manufacture, and has a high torque distribution ratio. However, it is inconvenient to use as it requires stopping the vehicle to operate. Failure to disengage the differential lock promptly can also cause other issues. 2. High-Friction Self-Locking Type: This differential lock engages through the frictional torque generated by the relative sliding of friction plates. It is commonly found in passenger cars or light vehicles but has higher manufacturing requirements, significant wear on friction components, and higher costs. 3. Torsen Type: This is a new type of differential lock widely used in all-wheel-drive passenger cars. It has a compact structure, offers a wide and adjustable range of torque transmission, but cannot be used as an inter-wheel differential lock on front drive axles.

15

0

Share

What Causes the Mercedes-Benz Engine Warning Light to Illuminate?

Sensor malfunctions, car maintenance issues, fuel or oil quality problems, poor combustion of the air-fuel mixture, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system malfunctions are the primary reasons for the engine warning light to illuminate. Additionally, during vehicle startup, the car performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check. If it remains on for an extended period, it is advisable to promptly visit a repair shop for professional assistance to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each potential fault: Sensor Issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen levels. When these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, triggering the engine warning light. In such cases, it is essential to visit a repair center for professional diagnosis and timely resolution of safety risks. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance schedules. If maintenance is neglected, combined with poor driving habits, the engine's operational burden increases, eventually causing the engine warning light to activate as a reminder of a fault. Oil Quality Issues: This refers to both fuel and engine oil. Fuel typically has a designated octane rating, while engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend specific fuel grades and oil types. If the owner fails to adhere to these recommendations over time, engine wear may occur, triggering the warning light. Always use the recommended fuel grade and suitable engine oil for the vehicle. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion. This results in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, causing the warning light to illuminate. Intake Issues: Engine combustion requires proper air intake. The air filter plays a crucial role here. If the air filter is dirty or not cleaned regularly, it can obstruct airflow, eventually leading to clogging and potentially triggering the engine warning light. Turbocharging Issues: Problems with the intake boost system or turbocharger can also cause the engine warning light to illuminate. Common issues include turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The most common issue is a malfunctioning catalytic converter, often caused by using leaded gasoline, improper lubricant additives, physical damage, or fuel system faults. Anti-Theft System: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the engine may not operate correctly, and the warning light may illuminate. Solutions for Engine Warning Light Illumination: If the engine warning light is on and the car cannot start, this may indicate a fuel pump or ignition component failure. It is recommended to call for assistance immediately. If the engine warning light is on and the car can still be driven but exhibits severe shaking or loss of acceleration, pull over safely and call for roadside assistance. If the engine warning light is on but no driving abnormalities are observed, it may indicate a minor sensor issue. In this case, you can continue driving cautiously at low speeds but should visit a repair shop as soon as possible to address the issue.

19

4

Share

How to Find the 30cm Mark for Stopping on a Slope in Subject 2?

What does Hill Descent Control mean in cars?

Is It Allowed to Make a U-Turn at a Red Light?

Spark Plug Composition Structure?

What is the pressure of a car air conditioner?

When to Use the Central Differential Lock?

What Causes the Mercedes-Benz Engine Warning Light to Illuminate?

Will Full Throttle Cause Engine Seizure?

What is the fuel tank capacity of the Jade?

How to Determine If You're Speeding?

What Components Make Up the Crankshaft Flywheel Assembly?