···
Log in / Register

How to Find the 30 cm Distance During Hill Start?

4 Answers
OJessica
07/29/25 11:27pm

Methods to find the 30 cm distance during hill start: 1. Observe the position of the engine hood. After hearing the voice prompt, drive forward and stay to the right. When one-third of the right front corner of the engine hood aligns with the roadside line, the distance between the car body and the roadside line is exactly 30 cm; 2. Look at the raised part of the wiper. From the driver's seat, when the raised part of the wiper aligns with the right roadside line, the distance is approximately 30 cm; 3. Observe the right front door handle. Check the right front door handle in the right rearview mirror. If the right front door handle is tangent to the right roadside line, the distance is just right. If it is too far, slight adjustments are needed. If it is too close, there is a risk of crossing the line.

Was this review help?
1
4
Share
OJulia
08/16/25 2:10am

When teaching driving, I often remind students that the key to finding the 30 cm mark during a hill start is practicing visual reference points. For example, when parking on a slope, I usually have students look at the right rearview mirror to observe the gap between the car body and the roadside line. Ideally, the distance should be about three fingers wide in the mirror. In actual practice, I recommend aligning with the marked line or curb on the slope, slowly ascending, and using slight steering wheel adjustments without turning too sharply. Keep the speed low and practice multiple times to enhance muscle memory. Remember, this is just part of the training—exams require precision, but don’t overstress. Another good method is aligning the hood from the driver’s perspective. The core lies in repeated attempts to find the reference point that works best for you. Most exam failures stem from lack of practice, so a few more rounds at the training ground should solve the issue.

Was this review help?
5
5
Share
Expand All
GemmaAnn
10/19/25 2:09am

When I first got my driver's license, finding the 30 cm distance was a real challenge. The instructor always said my distance wasn't accurate. Later, I figured out a trick: when going uphill, first let the car body lean slightly to the right so that the right tire gets close to the roadside. Then, look at the edge of the right window – if the shoulder line is parallel to the bottom seam of the window and maintains a one-finger gap, it's basically 30 cm. The key is to drive at a steady speed without sudden braking. I practiced many times on an empty slope, and later passed the test smoothly. This habit is still useful in my daily driving now, such as when parking on steep slopes, it helps avoid scratches or traffic disruptions. Essentially, it's about developing spatial awareness, and you'll get used to it gradually with practice.

Was this review help?
20
2
Share
Expand All
VanCayden
12/02/25 2:45am

Finding the 30 cm mark is mainly about visual alignment. When driving on slopes, I often use the front wiper points as a reference. For example, aligning the protruding point of the wiper with the inner edge of the road line. If the point presses against the inner side of the line, the correct position is roughly achieved. Control the speed slowly, and when the clutch is semi-engaged, pay attention to the stability of the car body. Make slight adjustments to the steering wheel without excessive movement. With regular practice, you can automatically sense the distance and avoid mistakes.

Was this review help?
20
3
Share
Expand All
More Forum Discussions

Can the Envision have its clutch assembly replaced?

Envision can have its clutch assembly replaced. Location introduction: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. Function introduction: The function of the clutch is to gradually engage the engine with the transmission, ensuring smooth starting of the vehicle, temporarily cutting off the connection between the engine and the transmission to facilitate gear shifting and reduce impact during shifting. It also acts as a separation during emergency braking, preventing overload of the transmission and other drive systems, thus providing a certain protective effect.
11
5
Share

What is the function of the large knob in BMW?

The knob next to the gear shift in the BMW 5 Series is a multimedia selection button and volume control knob, used during media playback and unrelated to the vehicle's driving system. High-quality audio and video effects: Initially, car audio evolved from primitive mono to dual-channel output, from four-channel surround stereo to today's Dolby Digital. Audio processors have progressed from basic linear potentiometers to analog audio processors and now digital processors. The pursuit of sound quality in car audio has shifted from the system itself to the spatial sound effects tailored for specific car models, incorporating various car noise collection and noise reduction processes to achieve high-quality sound effects. Information system and high safety performance: Car multimedia is no longer limited to audio and video systems but has become a mobile multimedia terminal, essentially a mobile car PC (AutoPC).
6
4
Share

What causes engine noise after changing to 5w30 oil in a BMW?

Possible reasons include the viscosity of the new oil being unsuitable. Detailed explanation: If the oil viscosity is too low, it may not provide sufficient lubrication, leading to increased wear and noise from engine components. Conversely, if the oil viscosity is too high, it can place excessive load on the engine, also resulting in noise. Another possibility is the use of low-quality oil, which can be resolved by switching to a high-quality oil of the appropriate specification. Valve noise: If the engine noise occurs when starting the car in a cold state, it may be due to valve noise. This happens because the car has been parked for an extended period, and the oil pressure hasn't built up yet, leaving the valves inadequately lubricated. The noise should subside shortly. If the noise persists, it could indicate excessive valve clearance or oil leakage at the camshaft, requiring adjustment of the valve clearance or replacement of the relevant oil seals.
5
3
Share

What is the fuel tank capacity of the 2010 Besturn B70?

The fuel tank capacity of the Besturn B70 is 60 liters. Precautions: Do not use gasoline with an octane rating lower than the manufacturer's recommendation. For example, if the manufacturer requires 97 octane, do not use 95 octane. It is also advisable not to refuel during thunderstorms due to lightning and fire prevention considerations. Gasoline is highly flammable, and flammable vapor can easily disperse into the surrounding air during refueling. In the event of a lightning strike, the consequences could be unimaginable. Volume-based pricing: Refueling at night or early in the morning is more cost-effective because gasoline is priced by volume rather than by weight. According to the thermal expansion principle, gasoline volume is relatively smaller during cooler nighttime and early morning temperatures, allowing you to get more fuel for the same amount of money.
13
4
Share

Should the Corolla go for its first maintenance after 3 months?

Corolla should go for its first maintenance after 3 months. Maintenance cycle: The Corolla needs its first maintenance when it has been driven for 3 months or 5000 kilometers. Maintenance is primarily aimed at preventing safety defects and is usually initiated by the car owner. Maintenance is conducted to reduce the wear and tear of car parts, prevent traffic accidents, and extend the lifespan of the vehicle. Items for the first maintenance of a new car: Replace engine oil, clean the air filter, check whether the levels of various fluids are normal; inspect the generator belt and wiper blades for any damage; check whether the tire pressure is normal and if there is any uneven tire wear, bulging, or damage; inspect the chassis, including: brake pads, brake discs, connecting rods, ball joints, and CV joints; check all switches and lights in the car to ensure they are functioning properly.
4
5
Share

What is the negative pressure of an Audi engine in bar?

The normal value for crankcase negative pressure is -350mbar. Ventilation methods: Crankcase ventilation methods include natural ventilation and forced ventilation. To prevent excessive crankcase pressure, extend the service life of engine oil, reduce component wear and corrosion, and prevent engine oil leakage, crankcase ventilation must be implemented. Modern gasoline engines commonly use forced crankcase ventilation, also known as the PCV system. Characteristics of automotive crankcases: The upper crankcase is cast integrally with the cylinder block, while the lower crankcase is used to store lubricating oil and seal the upper crankcase, hence it is also called the oil pan. The oil pan bears minimal stress and is generally made of stamped thin steel plate, with its shape determined by the engine's overall layout and oil capacity. The oil pan is equipped with an oil stabilizing baffle to prevent excessive oil surface fluctuations when the vehicle is jolted.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.