How to Fasten the Seat Belt in a Car?

What tires are equipped on the Trumpchi GS8?

Trumpchi GS8 is equipped with Maxxis 235/60R18 tires, which consist of three parts: the outer tire, inner tube, and flap. Taking the 2020 Trumpchi GS8 as an example, its body dimensions are: length 4740mm, width 1910mm, height 1775mm, wheelbase 2720mm, minimum ground clearance 162mm, and curb weight 1749kg. The 2020 Trumpchi GS8 is powered by a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 252PS, maximum torque of 390Nm, and maximum power of 185kW.

9

5

Share

How to Pry Open a Car Door?

There are different solutions for prying open a car door depending on the situation. The specific steps are as follows: 1. If there is a gap in the window: For an auto-locking car, you can use a long stick and a thin string or a straightened clothes hanger. Tie a slipknot in the middle of the string that can loop around the button, with a length about 50 cm longer than the window. Insert the long stick into the gap in the window and guide it close to the door lock button. Pull both ends of the string to bring the slipknot as close as possible to the button, then press the button to unlock. 2. If the car trunk is unlocked: Locate the emergency parking cable, which is either near the trunk door or on the floor. Pull the parking cable to unlock the rear passenger seats, allowing them to fold forward. Push the seats forward to create a new entry point to crawl into the trunk and unlock the rear passenger compartment door. 3. If all windows are closed: Use a wedge to open the door. Insert a wedge-like tool into the gap between the door and the car body. Apply force by hitting it—you may first wrap the wedge with a cloth or felt to protect the car's paint. Then, use a long stick to press the button firmly, successfully prying open the car door.

2

4

Share

Is fingerprint scanning required for the Subject 1 exam?

Fingerprint scanning is not required for the Subject 1 exam; you only need to bring your ID card. Please note that expired ID cards cannot be used. The total duration of the Subject 1 exam is 45 minutes. The exam consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 points, and a passing score of 90. The exam questions are randomly selected and combined by the computer driver's test system according to the proportion specified in the "Motor Vehicle Driver's License Work Specifications." Exam process: Follow the staff's instructions and collect your driving training file in order in the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; No loud talking is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam room; Candidates who pass the exam should sign under the guidance of the staff at the exam exit before leaving; Candidates who fail the exam can leave the exam room and wait for notification from their driving school staff regarding the retake time.

17

1

Share

Should You Press the Brake When Shifting Gears?

Whether you need to press the brake when shifting gears in an automatic transmission depends on the situation. Scenarios where you should press the brake: When shifting between P (Park), R (Reverse), and D (Drive), it is advisable to press the brake. This is primarily for safety reasons. If the car is moving in D (Drive), you must press the brake and wait for the vehicle to come to a complete stop before shifting into R (Reverse). Otherwise, unexpected incidents may occur. When shifting from P (Park) to a forward gear, pressing the brake prevents the car from suddenly lurching forward, which could lead to loss of control. Most automatic transmissions have a shift-lock feature that requires you to press the brake when shifting from P (Park) to other gears. Forcing the shift without pressing the brake may damage the transmission. Scenarios where you don't need to press the brake: While driving, you don't need to press the brake when shifting between forward gears, such as D (Drive), S (Sport), and L (Low). Simply move the gear lever to shift. For automatic cars with manual mode, shifting up or down also doesn't require pressing the brake.

15

4

Share

How to Deal with Misfiring Cylinder Issues?

To address a misfiring cylinder issue, a thorough vehicle inspection is required. The specific steps are as follows: 1. First, inspect the misfiring cylinder. Use a flathead screwdriver to ground the spark plug terminal nuts one by one and observe the engine's operation. For a cylinder that was already misfiring, grounding it will not change its operation. If the grounded cylinder was functioning normally, the engine's power will noticeably decrease, and uneven operation will worsen. 2. Alternatively, you can determine the non-functioning cylinder by checking the temperature of the spark plugs—a colder spark plug indicates that the cylinder is not working. Once the non-functioning cylinder is identified, remove its high-voltage spark plug wire and hold it 3-4mm away from the spark plug. Turn on the ignition switch and observe the spark. If there is no spark, slightly pull the other end of the wire out of the distributor socket and check if the adjacent socket sparks to the wire. If it sparks to the wire, the wire is leaking electricity. If there is no spark, inspect the distributor cap's adjacent socket for leakage (you can remove the central high-voltage wire from the distributor cap, insert it into the adjacent socket of the cylinder, and turn the crankshaft to observe the contact gap when the cam lobe acts). If there is a spark when the cylinder's spark plug wire is removed and the engine speed evens out, it indicates excessive carbon buildup or minor leakage in the spark plug. If there is a spark but the engine speed does not change, the spark plug is severely leaking electricity, and it is recommended to visit an auto repair shop promptly for inspection and repair.

12

1

Share

Where is the fuel filter located in the BMW X1?

The fuel filter of the BMW X1 is located inside the body guard plate under the driver's seat, and its function is to filter impurities from the gasoline. Taking the 2020 BMW X1 as an example, it belongs to the compact SUV category, with body dimensions of: length 4565mm, width 1821mm, height 1620mm, wheelbase 2780mm, fuel tank capacity 61L, and luggage compartment capacity 505L. The 2020 BMW X1 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, maximum power of 103kW, maximum torque of 220Nm, paired with a 7-speed dual-clutch transmission.

19

1

Share

How to Fasten the Seat Belt in a Car?

What tires are equipped on the Trumpchi GS8?

How to Pry Open a Car Door?

Is fingerprint scanning required for the Subject 1 exam?

Should You Press the Brake When Shifting Gears?

How to Deal with Misfiring Cylinder Issues?

Where is the fuel filter located in the BMW X1?

What is the function of the engine tachometer?

Can a Motorcycle Jump-Start a Car?

What Happens If Engine Oil Is Underfilled?

Is transmission fluid maintenance based on mileage or years?