How to Exit Driving Mode?

1 Answers
LeAdrian
07/29/25 5:26pm
Active ECO driving mode generally has a button, and the owner can choose whether to turn it on or not. After turning it on, a series of driving settings will change, such as a smaller throttle opening corresponding to the same accelerator pedal depth (the accelerator becomes less sensitive), the gearbox shifting logic is more focused on economy (shifting earlier), and some vehicles will also adjust the air conditioning output power at the same time. Here is some extended information: 1. When the car is in different driving modes, the operation modes of the engine and gearbox are different. Most cars basically have an eco mode, comfort mode, and sport mode. In eco mode, the accelerator pedal response is not so sensitive, and the gearbox will shift up at a relatively low speed, which can reduce fuel consumption. 2. In comfort mode, the car's accelerator pedal response is slightly more sensitive than in eco mode. 3. In sport mode, the gearbox will delay the shifting time, and it will only shift when the engine speed reaches the redline. At this time, the accelerator pedal is also very sensitive, and the ECU can also maintain a relatively high engine speed.
Was this review help?
15
1
Share
More Forum Discussions

What does 100y mean on car tires?

Car tire 100y refers to the tire's load index and speed rating. Here, 100 indicates the load index, meaning the tire can bear a maximum weight of 800kg under normal inflation conditions, while y represents the speed rating, indicating the tire's maximum speed capacity of 300km/h when carrying the specified load under defined conditions. The functions of car tires include: 1. Supporting the vehicle's entire weight and bearing the car's load; 2. Transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface; 3. Working with the car's suspension to mitigate impacts during driving and dampen resulting vibrations; 4. Protecting automotive components from severe vibrations and premature damage.
3
3
Share

What Causes Water Dripping from the Exhaust Pipe of a Diesel Engine?

Diesel engine exhaust pipe dripping water is caused by: 1. Cracks in the cylinder block or cylinder liner, allowing coolant to leak into the cylinder; 2. Wear or breakage of the cylinder liner water seal ring, causing coolant to leak into the oil pan; 3. For diesel engines stored outdoors in winter, failure to seal the ventilation system allows rain or snow to enter the cylinder and flow into the oil pan. The working principle of a diesel engine is: injecting diesel into the cylinder to mix with air, where combustion converts thermal energy into mechanical energy. The thermal engine relies on the expansion of gas during fuel combustion to push the piston in linear motion, which rotates the crankshaft through the crank-connecting rod mechanism, thereby outputting mechanical work.
20
4
Share

How to install the seat belt on Haval H6?

To install the seat belt on Haval H6, first adjust the seat backrest, straighten your upper body, and press it firmly against the backrest. Smooth out the seat belt, ensuring the shoulder belt fits snugly over the middle of your shoulder—not on your neck or off your shoulder. The lap belt should be fastened as low as possible across your hips. More details are as follows: 1. Function of car seat belts: In the event of a collision or when emergency braking is applied, the pretensioner will instantly retract, tightening any slack in the seat belt and securing the occupant firmly in the seat to prevent secondary collisions. If the retracting force exceeds a certain limit, the load limiter will slightly release the belt to maintain stable chest pressure. 2. Effectiveness of seat belts: Car seat belts serve to restrain movement and provide cushioning, absorbing impact energy and dissipating inertial forces to avoid or reduce the severity of injuries to drivers and passengers. Studies on car accidents indicate that wearing a seat belt can reduce fatalities by 57% in frontal collisions, 44% in side collisions, and 80% in rollovers.
15
3
Share

Where are the accelerator and brake located?

The accelerator is on the right, and the brake is in the middle. The accelerator pedal is slightly lower than the brake pedal and rarely requires deep pressing. The accelerator, also known as the throttle pedal, is part of the car's fuel supply system. Its working principle is: by controlling the amount of pedal pressure, it regulates the engine throttle opening, controls the air intake, and the computer adjusts the fuel supply, thereby controlling the engine speed. The brake, also referred to as the braking system, is the action that stops or reduces the speed of moving locomotives, vehicles, or other transportation tools or machinery. Its working principle is: a wheel or disc is fixed on the machine's high-speed shaft, and corresponding brake pads, bands, or discs are installed on the machine base to generate braking torque under external force.
16
5
Share

How often should a new car be serviced normally?

Normally, a new car should be serviced every 5,000 kilometers. At certain mileage intervals, a small wrench icon will appear on the dashboard to remind the driver to perform maintenance promptly. The main items for new car maintenance include: 1. Changing the engine oil, oil filter, fuel filter, and air filter; 2. Checking whether the level of the car's coolant meets the required specifications; 3. Checking whether the oil level in the power steering fluid reservoir meets the required specifications and inspecting all oil pipe connections in the system for any leaks; 4. Checking the tension and aging of the belts for the generator, air conditioning, water pump, and power steering pump; 5. Checking whether the front and rear lights of the car are complete; 6. Checking the tire pressure and wear condition of the car; 7. Checking whether the car's exhaust emissions meet the standards.
10
1
Share

What does it mean when the yellow engine light is displayed in a car?

When the yellow engine light is displayed in a car, it indicates that there is a fault with the engine and it requires timely repair. The reasons for the yellow engine light being displayed include: 1. Sensor issues; 2. Maintenance problems; 3. Fuel quality issues; 4. Poor combustion of the air-fuel mixture; 5. False faults. The car engine is the device that provides power to the car, determining its power, fuel efficiency, stability, and environmental friendliness. Based on the power source, engines are categorized into: 1. Diesel engines; 2. Gasoline engines; 3. Electric vehicle motors; and 4. Hybrid powertrains. The working principle of a car engine is: it relies on the force generated by the explosion of the air-fuel mixture to push the pistons, which then drives the crankshaft to operate.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.