How to Enter the Highway Entrance?
4 Answers
Before entering the highway entrance, approach at a low speed. Keep your speed below 40 km/h and avoid overtaking. When reaching the toll station, slow down. When merging onto the highway, accelerate to at least 60 km/h before entering the normal lane. During acceleration, use your turn signal and pay attention to vehicles behind you. Below is relevant information about driving on the highway: 1. Introduction to highways: Highways refer to high-speed roads, as compared to medium-speed and low-speed roads. In environments where low speeds are predominant, low speed is considered normal or standard speed, while in environments where medium speeds are predominant, medium speed is considered normal or standard speed. 2. Precautions before entering the highway: Check the weather and road conditions, perform a safety inspection on the vehicle, plan your route in advance, carry a vehicle breakdown warning sign and a fire extinguisher, and determine your driving and rest schedule beforehand.
I found entering the highway entrance is actually quite simple, mainly about spotting the signs and using the turn signal. About 1-2 kilometers before the highway entrance, pay attention to the blue signs indicating the highway name and direction. Slow down to around 40 km/h and stay in the far-right ramp lane. Remember to turn on the right turn signal to alert the cars behind—many beginners forget this step. Don’t drive too fast on the ramp; the speed limit is usually 40-60 km/h, and be extra cautious on curves. The most crucial part is observing the traffic on the left side of the main road when entering the merging area—wait for a large enough gap before merging. I’ve seen people panic and rush into the main road, which is extremely dangerous. Nowadays, some large toll stations require taking a ticket, so remember to roll down the window in advance.
The most important things when entering a highway ramp are controlling your speed and maintaining focus. You should start slowing down when you see the blue entrance sign from a distance. I usually turn on the turn signal in advance to alert other vehicles. After entering the ramp, pay attention to the rearview mirror to observe the traffic flow on the main road. Just last month at the G50 highway entrance, I saw a car almost get hit because the driver didn't check the mirrors. Typically, highway entrances have white diagonal marking zones - these are safety areas for vehicles to adjust their speed. Make good use of them instead of rushing straight in. Don't panic when merging; vehicles on the main road have the obligation to yield. Find the right gap and accelerate smoothly. Also watch for road markings, as some entrances have separate ETC lanes and manual toll lanes. The most dangerous situation is rainy days when the road is slippery and braking distances increase.
To merge onto the highway smoothly, master these three steps. First, find the correct position by paying attention to the blue roadside signs about two kilometers in advance, which display the highway name and directional arrows. Second, enter the ramp, reduce speed to 40-60 km/h, slow down further on curves, and remember to use your turn signal. Third, merge into the main lane by accelerating to around 80 km/h in the acceleration lane while checking over your left shoulder for approaching vehicles, then smoothly merge into an appropriate gap. Additionally, watch for special signs, as some entrances have weigh stations or inspection points. At night, pay extra attention to your headlights, as poor visibility can make it easy to miss the ramp. Beginners are advised to practice during off-peak hours when traffic is light, as merging onto the highway truly requires experience.
