How to Enter Maintenance Mode for Mercedes-Benz Windshield Wipers?
3 Answers
First, turn on the power of the Mercedes-Benz vehicle, then press and hold the brake pedal while turning off the vehicle's power. Pull the wiper control lever downward to its lowest position and hold it for three to five seconds, and the wipers will enter maintenance mode. During routine vehicle maintenance, it is also recommended to clean the wipers or replace the rubber blades if they are of poor quality.
I've been driving for over a decade, and the Mercedes-Benz wiper maintenance mode is really practical for changing wiper blades without scratching the windshield. The method is simple: Sit in the car without starting the engine, turn the key to the ON position to illuminate the dashboard, then quickly push the wiper control lever all the way up (the usual single wipe/wash action). The wipers will make one sweep, and at that exact moment, immediately turn the key to OFF to cut power. The wipers will then stop in an upright position for service. Be quick and decisive – any delay might cause them to reset. Avoid touching other switches during the process for safety. I recommend trying this trick before every wiper replacement – it saves time, effort, and protects your vehicle. Remember to check for slight variations across different models.
Buddy, I just replaced the wiper blades on my dad's Mercedes, and the service mode entry is super quick! After getting in the car, just turn on the power without starting the engine—that means the dashboard lights up but the engine doesn't run. Instantly push the wiper lever all the way up once, and it'll spray water and wipe once. Quickly turn off the ignition to cut the power, and the wipers will stop straight up, making it easy to replace the new blades. Practice the technique to ensure smooth execution without distractions. Doing this during routine maintenance helps prevent windshield damage. Sharing this in hopes it helps you out.
