How to Enter a Parking Lot with a New Car Without License Plates?

2 Answers
MacElena
07/29/25 5:43am
For parking lots that rely on automatic license plate recognition to lift the barrier and have no security guards, you cannot enter in this situation. Because the machine cannot recognize temporary license plate numbers. For parking lots that rely on automatic license plate recognition to lift the barrier and have security guards, you can ask the security guard to register and enter. The temporary license plate for a new car is not allowed to exceed 15 days. Exceeding the deadline will result in penalties such as temporary car seizure, fines, and deduction of 12 points.
Was this review help?
5
0
Share
DiWeston
08/12/25 9:16am
When picking up a new car, the lack of license plates can be awkward. I’ve learned to prepare in advance in the city: before leaving the dealership, ask the salesperson for a temporary access pass—they’ll provide a label with an order number to stick on the windshield, and security will let you pass with just a glance. If you forget the pass, don’t panic; try the manual ticket lane—there’s usually a button at the entrance to print a ticket, which you can use for entry and payment. Another trick is using a parking app—many lots, like those with Alipay QR codes, let you scan to open the gate, saving hassle. Remember, driving without plates carries risks—don’t park for long, and leave once your plates are ready to avoid inconveniencing others or facing fines. Always check with the dealership for advice—they know the process best. Stay flexible and polite, and you’ll manage just fine.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

How to defog the windshield of Buick GL8?

The rear windshield defogging is done by a separate button for electric heating defogging, while the front windshield defogging can be done using either the air conditioning or the heater. Below is a related introduction to windshield defogging: 1. Cold air defogging: The car air conditioning is the most commonly used method for defogging. Both cold air and warm air have defogging effects. Cold air defogging is the fastest because it easily balances the temperature inside and outside the car. However, turning on the cold air on a freezing day can make you shiver, so using cold air is not recommended. 2. Warm air defogging: The warm air from the air conditioning is quite effective for defogging and is very practical, especially since most people turn on the heater while driving in winter. However, initially, due to the large temperature difference between the inside and outside, more fog may form. Once the warm air dries the fog, it will naturally disappear.
16
5
Share

How Long Does It Usually Take to Install Window Tint Film?

Installing tint film for four-door windows plus the front and rear windshields typically takes about one and a half hours. The process for the four-door windows is relatively quick, while the front and rear windshields may take slightly longer. Below are some precautions for car window tinting: 1. Pre-installation precautions: Before installation, carefully inspect the car windows for any damage. After the film is applied, the car owner should sit inside the vehicle to check for uniform color, bubbles, foreign particles, and whether the film affects visibility from different angles when looking outside. 3. Post-installation precautions: After the tint film is installed, avoid rolling the windows up and down for a few days. Generally, for the side windows, avoid operating them for 24 hours in summer and 48-72 hours in winter, as the film may not have fully adhered and could shift due to window movement. Additionally, avoid washing the car for three days to prevent the film from peeling off due to moisture.
16
1
Share

How to Find the 30 cm Distance During Hill Start?

Methods to find the 30 cm distance during hill start: 1. Observe the position of the engine hood. After hearing the voice prompt, drive forward and stay to the right. When one-third of the right front corner of the engine hood aligns with the roadside line, the distance between the car body and the roadside line is exactly 30 cm; 2. Look at the raised part of the wiper. From the driver's seat, when the raised part of the wiper aligns with the right roadside line, the distance is approximately 30 cm; 3. Observe the right front door handle. Check the right front door handle in the right rearview mirror. If the right front door handle is tangent to the right roadside line, the distance is just right. If it is too far, slight adjustments are needed. If it is too close, there is a risk of crossing the line.
1
4
Share

Can You Drive an Automatic If You Can Drive a Manual?

Being able to drive a manual transmission doesn't necessarily mean you can drive an automatic smoothly; there might still be some discomfort, and more practice is needed. When driving an automatic, pay attention to two key points: 1. Press the brake when turning the key to start the engine; 2. Also press the brake when shifting gears before moving off. The gear letters PRND on an automatic transmission stand for Park, Reverse, Neutral, and Drive respectively. Note that the brakes on an automatic are more sensitive than those on a manual, so when driving one for the first time, press the brake gently if there's no emergency. Never coast in neutral, as it can cause significant damage to the transmission. Manual transmissions are divided into 1st, 2nd, 3rd, 4th, 5th gears, and reverse.
15
2
Share

What are the safety hazards in auto repair shops?

Auto repair shops face safety hazards in terms of personal safety and property safety. Personal safety includes the correct use of tools and equipment, such as lifts, welding machines, spray guns, etc. Property safety mainly involves taking care not to damage customers' vehicles, such as avoiding wearing clothes with sharp decorations or rings. Below is a detailed introduction about automotive safety: Overview: Automotive safety for vehicles is mainly divided into two major aspects: active safety and passive safety. Active safety refers to the ability to control the vehicle as smoothly as possible. Whether it's braking and accelerating in a straight line or steering left and right, the operation should be as smooth as possible to avoid deviating from the intended path and not affecting the driver's vision and comfort. Others: Automotive safety technology covers an increasingly broad and detailed range, developing towards integration, intelligence, systematization, and comprehensive involvement. Strictly controlling speed during nighttime driving is a fundamental measure to ensure safety.
5
0
Share

What are the differences between Brilliance BMW and imported BMW?

The following are the differences between Brilliance BMW and imported BMW: 1. Market differences: Brilliance BMW is targeted at the domestic market, so there are some differences in details compared to imported BMW. The wheelbase of Brilliance BMW is longer than that of imported BMW, giving it some advantages in space and higher cost performance. 2. Assembly differences: Domestic models are entirely manufactured and assembled in China, while imported models are fully exported to China from abroad, meaning they are manufactured and assembled in Germany. 3. Model differences: Imported BMWs are European models, which are more sporty. After being introduced to the domestic market, some adjustments have been made to suit local conditions. Most models introduced domestically are more comfortable compared to the original imported versions. Many models have also been lengthened accordingly, sacrificing some handling performance to improve comfort. The prices are also much cheaper.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.