How to Engage the S Gear in Volkswagen Lavida?

1 Answers
Crystal
07/30/25 4:56am
After shifting into D gear in the Volkswagen Lavida, pull the gear lever back once more to engage the S gear. The S gear stands for Sport mode, where the transmission can shift freely, but the shifting timing is delayed to maintain higher engine speeds for longer periods, thereby increasing the vehicle's power. When descending a slope, the engine's low-speed resistance acts as a brake, preventing the car from accelerating uncontrollably. The S gear can be engaged when the vehicle needs to respond to overtaking or climbing, as it increases the engine's load and delays the shift response, providing greater power in a short time, which facilitates overtaking or climbing responses. The Volkswagen Lavida is a compact car with a 4-door, 5-seat sedan body structure, measuring 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm.
Was this review help?
10
4
Share
More Forum Discussions

Why does the new car lack power when accelerating in first gear?

1. Pay attention to fuel pressure and lubricant quality when experiencing lack of power in first gear. Fuel pressure: To ensure normal engine starting, the residual fuel pressure in the fuel system after engine shutdown should not be lower than 2.5-3.5 kg/cm². Otherwise, insufficient pressure will prevent the fuel injector from spraying enough fuel for starting. If you repeatedly turn the ignition switch at this time, the fuel pressure will return to normal, making starting much easier. Lubricant quality: When winter comes, it's necessary to replace various lubricants in time, including engine oil, transmission oil, and power steering fluid. This is because ordinary lubricants become more viscous in winter, with poorer fluidity, leading to increased frictional resistance during component movement and making cold engine starting difficult. You can choose engine oil with slightly lower viscosity to reduce mechanical wear and protect the engine.
13
4
Share

What is the fuel consumption of the Volkswagen 1.6 Sagitar manual transmission?

The official comprehensive fuel consumption of the Sagitar 1.6 manual model is 6.5L/100km. The main factors affecting vehicle fuel consumption are: 1. Good vehicle condition is the foundation of fuel efficiency: In addition to regular cleaning, proper maintenance is crucial, such as lubricating wheel hub bearings on time, replacing air filter elements periodically, and promptly checking the condition of the vehicle's brakes. 2. Incorrect driving habits can double fuel consumption: As cars become more common in households, the number of non-professional drivers has increased. Some drivers' poor habits can lead to higher fuel consumption. 3. Road conditions significantly determine fuel consumption: Experts estimate that driving in urban conditions increases fuel consumption by 20% compared to driving on test tracks. The biggest factor affecting fuel consumption in city driving is frequent starts, stops, gear shifts, accelerations, and decelerations caused by traffic congestion. Driving on poor road surfaces also increases fuel consumption.
3
1
Share

What brand is the Qoros 3?

The Qoros 3 is a new product from QOROS. Below is an introduction to the Qoros 3's interior and powertrain: Qoros 3 Interior: The Qoros 3 offers a very spacious interior. The entire center console is minimalist, featuring an 8-inch touchscreen display in the middle. The car is equipped with an in-vehicle infotainment system developed by Qoros, allowing the driver to use various functions by swiping fingers on the system's interface. Qoros 3 Powertrain: The Qoros 3 offers two 1.6-liter engine options, both equipped with variable valve control technology. In terms of the transmission system, both engines can be paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission.
7
3
Share

Is there a fee for vehicle mortgage release?

Vehicle mortgage release does not require any service fees. It is recommended to proceed with the normal mortgage release process at the dealership or bank. If any service fees are charged, it constitutes an unauthorized charge and can be reported. Required documents for vehicle mortgage release: 1. For the owner to release the mortgage: identity proof of the owner and the mortgagee (a copy of the bank's organization code certificate), the bank's power of attorney with an official seal, the registration certificate (with mortgage release information noted), and filling out forms at the vehicle management office. 2. For a third party to release the mortgage: a power of attorney, identity proof and copies of the vehicle owner and mortgagee; 'Motor Vehicle Mortgage Registration/Pledge Record Application Form'; in cases where the mortgage is released through court mediation, ruling, or judgment, the vehicle owner or mortgagee must also submit the effective 'Mediation Agreement', 'Ruling', or 'Judgment' issued by the court, along with the corresponding 'Notice of Assistance in Execution', and the motor vehicle registration certificate.
15
2
Share

Can a Brand New Car Go on a Long-Distance Highway Trip?

A new car is in its break-in period, and it can go on the highway as long as you avoid aggressive acceleration and braking. Here are some precautions during the break-in period: 1. Try to avoid emergency braking: Emergency braking not only shocks the braking system during break-in but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers. 2. Avoid overloading: If a new car is fully loaded during the break-in period, it can cause damage to the components. Therefore, within the first 1,000 kilometers, the load should generally not exceed 75%-80% of the rated capacity. 3. Highway driving: If a new car goes on a long-distance trip during the break-in period, the engine's continuous working time will increase, which can lead to component wear. It is recommended to maintain a speed of 120 km/h with the engine RPM not exceeding 3,000. If the RPM exceeds 3,000, consider reducing the speed to keep it at 3,000 RPM. During long-distance driving, take a break of about ten minutes at service areas whenever possible.
7
5
Share

What counts as speeding on urban expressways with a 60 km/h speed limit?

Exceeding 60 km/h is considered speeding. Introduction to Expressways: Urban expressways, a type of expressway and the main component of rapid highways, rank at the top of the four levels of urban roads. These roads feature a central divider, have at least four lanes in both directions, and are fully or partially grade-separated with controlled access, allowing vehicles to travel at higher speeds. Their primary purpose is to ensure smooth and continuous vehicle flow, enhancing transportation efficiency within the city. Definition of Expressways: A key principle of urban expressways is that they have no traffic lights, enabling continuous traffic flow. Therefore, all intersections must be designed as interchanges, whether simple or complex, depending on the related roads. Beijing's Second, Third, and Fourth Ring Roads are typical examples of expressways. While Chang'an Avenue is as wide as the Fourth Ring Road, it has numerous traffic lights and at-grade intersections, classifying it as a main road rather than an expressway.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.