How to Engage Four-Wheel Drive in a Leopard Car?

[GageLee]

Four-wheel drive engagement method for Leopard cars: There is a rotary switch on the axle of each front wheel, located inside the protruding small bulge on the front wheel axle. This rotary switch serves as the 4WD/2WD selector. To engage four-wheel drive, turn both front wheel switches to the ON position; for two-wheel drive, set them to OFF. Leopard Auto, short for Hunan Leopard Automobile Co., Ltd., is a comprehensive automobile manufacturer. Taking the Leopard CS10 model as an example, its body dimensions are 4719mm in length, 1875mm in width, and 1700mm in height, with a wheelbase of 2700mm. In terms of exterior design, the Leopard CS10's grille is divided into three sections, creating a highly layered appearance. The headlights feature crystal diamond-style design with projector-equipped low beams using halogen light sources, while daytime running lights are integrated into the headlight assembly.

[DiOlivia]

As a seasoned off-road enthusiast with years of driving experience, let me share how to engage four-wheel drive in a Leopard vehicle. Typically, you'll find a knob or button on the center console or near the gear lever labeled with modes like 2H, 4H, and 4L. First, bring the vehicle to a complete stop for safety. If it's an automatic transmission, shift to neutral. Then slowly turn the knob to 4H mode - this is high-range four-wheel drive, ideal for snowy or slippery conditions. For low-range 4WD when climbing steep slopes, you must be stationary before switching by turning the knob to 4L. I once forgot to stop when switching in muddy terrain, which caused strange noises in the system and later required a garage inspection - quite troublesome. After switching, always check the dashboard indicator to confirm activation. Avoid keeping 4WD engaged on dry roads to save fuel and prolong vehicle lifespan. Though simple, small mistakes can happen, so I always test the system before long trips.

[DeArya]

I prefer to directly tell you how to operate the Leopard SUV's 4WD system for the most hassle-free experience. The steps are actually quite simple: First, park on level ground and ensure the vehicle speed is zero. Then check the gear position—for automatic transmission vehicles, shift to N (Neutral). Next, locate the 4WD control knob, usually near the gear lever or dashboard, and rotate it to the desired mode like 4H or 4L. Operate the switch slowly and listen for mechanical engagement sounds to confirm proper positioning. I rarely use 4WD when driving in the city, but it's essential off-road, especially during rain or snow where it provides significant traction assistance. Avoid keeping 4WD mode engaged for extended periods on highways or paved roads as it increases fuel consumption and may damage the differential. Regular checks of tire conditions and knob flexibility are also important to prevent jamming that could affect operation. Just follow these simple steps—the key is developing the habit of only engaging it when the vehicle is completely stationary.

[LunaLynn]

If you're struggling with the issue of engaging 4WD in a Leopard vehicle, let me break down the steps and principles from a practical perspective. Coming to a complete stop is crucial during operation, otherwise the gears may grind and damage the drivetrain. Locate the control knob to switch from 2H to 4H for high-range 4WD mode, suitable for regular off-roading; switching to 4L activates low-range 4WD with increased torque for powerful hill climbing. Having driven similar models, I can confirm you should hear a distinct click indicating proper engagement when operating after stopping. After mode switching, check if the dashboard indicator lights up to ensure stable connection. Frequent switching isn't recommended unless road conditions deteriorate significantly (e.g., mud or snow), which helps protect 4WD components. Regular vehicle maintenance also makes the entire process smoother.