How to Enable the Horn Sound When Locking the Lamando?
3 Answers
To enable the horn sound when locking the Lamando, use the remote key to activate the locking horn sound. Simultaneously press the unlock and lock buttons for 3 seconds until the light flashes. The horn is the audio signal device of a car. During driving, the driver can emit necessary audio signals as needed or required to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. Additional relevant information is as follows: 1. Electromagnetic vibration produces sound: The electromagnetic coil attracts the moving contact switch of the relay to close, allowing current to flow to the horn. The current activates the electromagnet inside the horn, causing the diaphragm to vibrate and produce sound. 2. Air horn: The air horn is mainly used on heavy-duty trucks equipped with air braking systems. 3. Adjusting the horn sound: To ensure normal horn operation, the horn should not be rigidly mounted. Instead, it is fixed on a buffer bracket, meaning that leaf springs or rubber pads should be installed between the horn and the fixed bracket.
As a car enthusiast who frequently tinkers with new features, I remember studying how to enable the horn sound on lock function when I first got my Lamando. This not only helps you quickly locate your car in a parking lot but also prevents accidental locking. Simply put, you need to start the vehicle or power it on first, then locate the "Settings" menu on the central touchscreen. Next, select the "Vehicle" or "Comfort Functions" option, and after entering, look for the "Central Locking Settings." Inside, there should be an option labeled "Lock Confirmation Sound" or something similar—just tap to enable it. The whole process is as intuitive as operating a smartphone and usually takes no more than two minutes to complete. I find this setting quite practical, especially in noisy environments, as it ensures the doors are truly locked and helps avoid unnecessary hassles. If you have the owner's manual, you can also check the supported section for more detailed instructions.
From my experience, Lamando owners often ask in the community how to enable the horn sound when locking the car, as it might be turned off by default. The steps are quite straightforward: First, ensure the car is powered on or the engine is running. Then, on the central control screen near the dashboard, click the main menu icon and enter the "Vehicle Settings" category. Scroll to find the "Door Lock System," where there should be a "Lock Confirmation Sound" function. Select it and switch it to the "On" state. Once enabled, the horn will beep once as confirmation each time you remotely lock the car. I highly recommend doing this, as it provides audible feedback that the operation was successful, which is especially useful at night or in crowded places, and can also reduce issues caused by accidental presses. If you're unsure where to find the setting, try paying more attention to the on-screen prompts—the Lamando's interface is designed to be very intuitive.
