How to Enable One-Touch Window Lift for the 2021 Sylphy?

1 Answers
SanMadelyn
07/25/25 3:16am
The method to enable one-touch window lift for the 2021 Sylphy is: 1. Turn the ignition switch to the ON position, and open the driver's side window switch to more than halfway; 2. Pull up and hold the driver's side window switch to close the driver's side window; 3. After the window is fully closed, hold the switch for about 3 seconds, then release and check if the power window function is working properly. Taking the 2021 Sylphy Classic 1.6XE Manual Comfort Edition as an example: It is a compact 4-door, 5-seater sedan under Dongfeng Nissan, with dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, a wheelbase of 2700mm, and a top speed of 188 kilometers per hour.
Was this review help?
4
0
Share
More Forum Discussions

Why does the car feel sluggish when starting with the AC on?

This issue is related to the vehicle's displacement and power output, and it commonly occurs in models with smaller engine displacements. Below is relevant information about automotive air conditioning systems: 1. Introduction to Automotive Air Conditioning: An automotive air conditioning system consists of a compressor, condenser, throttle element, evaporator, blower, and necessary control components. It is designed to regulate interior temperature and humidity, providing a comfortable environment for the driver. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the refrigerant's temperature and pressure increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy. The liquid refrigerant then flows through the throttle device, where its temperature and pressure decrease before entering the evaporator. In the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the interior air passing through the evaporator and evaporates back into gas. This gas is then drawn into the compressor to begin the next cycle.
1
5
Share

How to Shift from D to S in an Automatic Transmission?

It is possible to shift from D to S while driving an automatic transmission vehicle, and you can do so directly. The methods to shift to S gear are: 1. If the letter S is to the left of the letter D, simply pull the gear lever to the left; if the letter S is to the right of the letter D, pull the gear lever to the right. 2. If the letter S is a separate position, simply pull the gear lever to the S position. Things to note when shifting gears: 1. There is no need to press the brake. 2. You can either release or keep pressing the accelerator. 3. Shifting from D to S requires pressing the gear lock; shifting from S to D does not require pressing the gear lock. The gear lock is the button on the gear lever. S gear stands for Sport mode, which is called Sport mode in many car models. Engaging S gear will cause the car to shift up later or downshift earlier, keeping the engine at higher RPMs and increasing torque output for greater power.
19
3
Share

What Causes a Car to Fail to Start After Shutting Off and Then Starting Again?

When a car engine fails to start after shutting off and then starting again, but can start after a while, this situation is usually caused by insufficient fuel supply. Possible reasons include low fuel level in the tank or an aging fuel pump. The solution is to check whether the fuel is sufficient and whether the fuel pump is working effectively. Resolving these issues can address the problem of the engine failing to start. Here is additional information: Excessive carbon buildup in the vehicle can also cause the car to fail to start. The solution is to frequently drive at high speeds to reduce carbon buildup. Additionally, there is a small trick for starting the car: before turning the key to start the engine, first turn it to the ON position, then back, and then to the START position to ignite. This allows the computer to calculate the water temperature and the appropriate air intake, making the ignition smoother.
14
3
Share

How Long is the Shelf Life of Engine Oil?

Engine oil has a shelf life of five years after opening. Below is relevant knowledge about automotive engine oil: Methods for selecting automotive engine oil: For new cars, choose a lower viscosity 5W30; for older cars, opt for a higher viscosity 5W40. European and American cars should use fully synthetic oil with slightly higher viscosity, while Japanese and Korean cars are better suited for lower viscosity 5W30. If frequently stuck in traffic, choose lower viscosity oil; for frequent highway driving, select higher viscosity oil. Avoid using extremely high viscosity oil just because the oil pressure gauge reads low in summer. Functions of automotive engine oil: Lubrication and friction reduction: forms an oil film between two sliding components to prevent friction during operation, ensuring smooth movement. Cleaning and dispersion: high-quality engine oil can flush away dirt from component surfaces and absorb tiny metal fragments inside the engine, which are then scraped into the oil pan by the piston oil ring.
10
4
Share

What is the fuel consumption of the Hongyan Jieshi 430?

The average fuel consumption of the Hongyan Jieshi 430 is 46 liters. Below is some relevant knowledge about vehicle fuel consumption: How to calculate fuel consumption: The method to calculate fuel consumption is as follows: divide the amount of fuel used by the distance traveled in kilometers, then multiply by 100. The economic indicator of a vehicle is mainly represented by fuel consumption, which is an important performance aspect of vehicle usage. The formula for calculating fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers = Volume of fuel (liters) ÷ Distance traveled with that fuel (kilometers) × 100. Reasons for high fuel consumption: Engine displacement: The engine's displacement is a fixed factor affecting a vehicle's fuel consumption. Tire pressure: There is a direct relationship between a vehicle's fuel consumption and tire pressure. Road conditions: The road conditions on which a vehicle is driven can also affect fuel consumption. Combined fuel consumption: The average value obtained from total emissions in urban and suburban areas.
13
2
Share

Which types of people are not allowed to obtain a driver's license?

Several types of people who cannot obtain a driver's license: 1. Individuals with red-green color blindness. Those with red-green color blindness cannot distinguish between red and green, and naturally cannot recognize traffic signals, hence they are ineligible for a driver's license; 2. According to laws and regulations, individuals who have used or injected drugs within the past 3 years, or have not completed 3 years since the termination of compulsory isolation for drug rehabilitation, or are addicted to long-term use of dependent psychotropic drugs and have not yet quit, are not allowed to apply for a driver's license; 3. People with serious illnesses, such as heart disease, epilepsy, vertigo, or brain diseases affecting limb movement, are not eligible to apply for a driver's license; 4. Those who have had their driver's license revoked due to drunk driving cannot take the driver's license test for 5 years. If the drunk driving involved commercial vehicles, they are barred from retaking the test for 10 years; 5. Those who flee after causing a traffic accident will have their motor vehicle driver's license revoked by the traffic management department of the public security organ and will be permanently banned from obtaining a motor vehicle driver's license again.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.