How to enable CarPlay in Volvo?

What are the reasons for a car's air conditioning not cooling?

Reasons for a car's air conditioning not cooling: 1. Insufficient or too little refrigerant: Simply add refrigerant; 2. Too much refrigerant: The proportion of refrigerant in the air conditioning system is specified. If the proportion is too high, it will affect heat dissipation. Slowly release some refrigerant at the low-pressure side maintenance port; 3. Loose drive belt of the car's air conditioning compressor: If the drive belt is loose, the compressor may slip during operation, reducing transmission efficiency, causing the compressor speed to drop and the delivery of compressed refrigerant to decrease, leading to the air conditioning not cooling. If the drive belt is too loose, it should be tightened. If it cannot be turned by hand, the belt is too tight and should be slightly loosened; 4. Unqualified refrigerant or refrigeration oil; 5. Moisture infiltration into the refrigeration system: Replace the desiccant or dryer in the car's air conditioning, evacuate the system again, and refill with the appropriate amount of new refrigerant.

19

3

Share

How to Paint a Car by Yourself?

Methods for painting a car by yourself: 1. Clean the car thoroughly; 2. If the car surface is too smooth, use 600-grit sandpaper to sand it until it feels rough, which helps the paint adhere better and prevents peeling; 3. When spraying, maintain a distance of about 20 cm from the car, press the nozzle, and apply the paint evenly. Multiple coats will yield better results; 4. When applying multiple coats, ensure an interval of at least 10 minutes between each coat to allow the paint to dry and avoid sagging (excess liquid paint dripping is called sagging); 5. If sagging occurs, wait for it to dry, then sand it smooth with 600-grit sandpaper and reapply paint from a distance; 6. After the paint is completely dry, apply a layer of clear coat (also known as varnish) to enhance gloss, protect the paint, and improve durability.

18

2

Share

Should You Shift Gear or Release the Handbrake First in an Automatic Transmission?

In an automatic transmission, you should shift into gear first and then release the handbrake. This is the safe operating sequence. Whether you shift into gear or release the handbrake first does not affect the vehicle's transmission components. The purpose of releasing the handbrake last is to prevent the vehicle from rolling. The specific steps for starting the vehicle after getting in are: insert the key into the ignition switch, press the brake pedal, and start the vehicle. After the engine starts, release the brake pedal and wait for 1 minute (this can be extended appropriately in winter) to allow the engine to be fully lubricated. During this time, you can fasten your seatbelt, adjust your seat, and check the dashboard for any abnormal warning lights, as well as ensure the rearview mirrors provide good visibility. If necessary, turn on the appropriate lights. Then, press the brake pedal, shift into gear, and finally release the handbrake. After checking the surrounding environment, you can release the brake pedal and prepare to start moving.

11

3

Share

How Often Should the Transmission Fluid of Emgrand GL Be Replaced?

Emgrand GL transmission fluid needs to be replaced every two years or every 40,000 kilometers. The primary function of transmission fluid is to ensure the cleanliness of the gear system and to lubricate the transmission device, thereby extending its service life. Transmissions are mainly divided into manual and automatic transmissions. Even if the same model of transmission is configured in different vehicle models, the torque structure and speed will vary. Therefore, each transmission has its designated transmission fluid. The Emgrand GL is a compact car under Geely Auto, with body dimensions of 4725mm in length, 1802mm in width, and 1478mm in height, and a wheelbase of 2700mm. It is equipped with 1.4-liter and 1.5-liter turbocharged engines.

15

2

Share

What car has a wing and a B logo?

A wing and a B logo represent Bentley, a British luxury car brand that is considered high-end, alongside other luxury brands such as Rolls-Royce and Maybach. Taking the Bentley Mulsanne as an example: it is a large car under Bentley, with dimensions of 5825mm in length, 1926mm in width, and 1541mm in height, and a wheelbase of 3516mm. The Bentley Mulsanne is equipped with a 6.8T V8 twin-turbocharged engine, delivering a maximum power of 377 kW at 4000 rpm and a maximum torque of 1020 Nm at 1750 rpm.

3

2

Share

Does the Hyundai ix35 comply with China 6 emission standards?

The Hyundai ix35 does not comply with China 6 emission standards; it meets China 5 emission standards. The vehicle's factory certificate clearly indicates that its exhaust emissions conform to China 5 standards. The dimensions of the Hyundai ix35 are 4435mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2640mm. In terms of powertrain, the Hyundai ix35 offers two engine options: a 1.4T turbocharged engine and a 2.0L naturally aspirated engine. The 1.4T engine delivers a maximum power of 103kW and a maximum torque of 242Nm, while the 2.0L engine produces a maximum power of 118kW and a maximum torque of 193Nm.

12

4

Share

How to enable CarPlay in Volvo?

What are the reasons for a car's air conditioning not cooling?

How to Paint a Car by Yourself?

Should You Shift Gear or Release the Handbrake First in an Automatic Transmission?

How Often Should the Transmission Fluid of Emgrand GL Be Replaced?

What car has a wing and a B logo?

Does the Hyundai ix35 comply with China 6 emission standards?

Which is high temperature, hi or lo?

What is the Difference Between Diesel Fuel Grades?

Why Should Front Tire Pressure Be Higher Than Rear Tires?

Where in Shaanxi is the license plate 'Shaan S' from?