How to Enable Auto Hold in the Leiling?

2 Answers
LaMadeline
07/28/25 11:28pm
To enable the auto hold function in the Leiling, first, start the car and turn on the auto hold feature. Then, shift to D gear and release the brake pedal. The auto hold function allows the car to remain stationary at traffic lights without the need to manually engage the handbrake, reducing driver fatigue and preventing the car from rolling. Here are some details about using auto hold and auto start-stop: 1. Disable the auto start-stop function when starting on a slope, as the slow response may cause the car to roll, posing a danger. 2. Auto hold locks the wheels, eliminating the need for the driver to keep pressing the brake pedal. Pressing the accelerator pedal again will release the brake, allowing the car to move forward. 3. Auto start-stop turns off the engine, and unless the car is also equipped with auto hold, the driver must keep pressing the brake pedal during this process. Releasing the brake pedal will restart the engine.
Was this review help?
12
2
Share
McArya
08/12/25 3:50am
Activating the auto hold feature on the Leiling model is quite straightforward, but let's delve into more details to ensure nothing's missed. Typically, after entering the car and starting the engine, you'll notice a BRAKE HOLD button on the center console—likely positioned near the gear lever or within the climate control panel. Pressing it to illuminate the indicator light confirms activation. Once engaged, the system automatically maintains braking when stopped at traffic lights or in congestion, eliminating the need to keep the brake pedal depressed. To resume driving, a gentle tap on the accelerator automatically releases the brake, ensuring smooth transitions. This setup significantly reduces fatigue, particularly on inclines where it prevents rollback, enhancing safety. If the function fails or the light flashes, possible causes include incomplete vehicle stop or system-detected faults—prompting manual handbrake use followed by consulting the manual or visiting a dealership for maintenance. Making it a habit to enable this feature every drive transforms urban commuting into a more effortless and dependable experience.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

Does the BMW 5 Series require specialized coolant?

The BMW 5 Series does not require specialized coolant. Any brand coolant that matches the quality and composition of the original factory coolant can be used. Different brands of coolant may have varying production formulas, and mixing them could lead to chemical reactions between multiple additives, potentially rendering the additives ineffective. Coolant composition: The main components of coolant are: 50% purified water, 40% methanol, and 10% other substances. Types of coolant: Coolants are generally divided into three types: ethanol-water, glycerol-water, and ethylene glycol-water. How to choose coolant: The basic indicators of coolant are freezing point and boiling point. The market offers coolants with freezing points of -15°C, -25°C, -30°C, -40°C, etc. It is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region.
20
3
Share

What does the SRS display on the Mercedes-Benz R300 mean?

The SRS display on the Mercedes-Benz R300 refers to the airbag system. An illuminated SRS warning light indicates a fault in the airbag or seat belt pretensioner system. Airbag System: A passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, the airbag can reduce head injuries by 25% and facial injuries by approximately 80%. Precautions: If the airbag warning light on the dashboard remains illuminated, it indicates that the airbag system failed the self-check during vehicle startup. While this fault does not affect normal driving, it means the airbags may not deploy during an accident, failing to provide passive protection. Therefore, it is essential to take the vehicle to a 4S shop or professional repair facility as soon as possible for maintenance.
12
2
Share

What are the penalties for driving out of province with temporary license plates?

Penalties for driving out of province with temporary license plates include vehicle impoundment, a fine of 200 yuan, and a deduction of 3 points. Below is an introduction to the relevant content: 1. Conditions for leaving the province: New cars with temporary license plates can travel to other provinces, but they must have cross-administrative district temporary license plates, and the temporary license plates must be within their validity period. 2. Temporary license plates: Temporary license plates are temporary vehicle travel permits issued by the public security vehicle management department for newly purchased vehicles before they are officially registered. The validity period generally does not exceed thirty days. 3. Types of temporary license plates: Temporary license plates within administrative districts, cross-administrative district temporary license plates, temporary license plates for test vehicles, and temporary license plates for special vehicles. 4. Duration of use: New cars must not use temporary license plates for more than 15 days. Owners should promptly apply to the vehicle management authority for the use of official license plates.
2
2
Share

What to Do When a Motorcycle Has No Power to Start?

Here are the methods to start a motorcycle when it has no power: 1. Lift the motorcycle: First, lift the motorcycle using its main stand. 2. Shift gears: Shift the gear to the 4th or 5th position. 3. Increase idle speed: Increase the idle speed and quickly pull the rear wheel backward. Here is additional information on the reasons for abnormal noises when releasing the clutch on a motorcycle: 1. Wear: Uneven wear between the friction plates and steel plates can produce a sharp noise during engagement. 2. Dry friction: Due to reasons such as oil viscosity, the friction plates and the contact surfaces of the center sleeve and pressure plate may not receive sufficient oil penetration, leading to dry friction and abnormal noises. 3. Clutch: Loosening of the locking mechanism or adjustment mechanism during use can cause imbalance in the clutch.
8
2
Share

What Causes the Interior Light of the Buick Regal to Stay On?

The interior light of the Buick Regal staying on may be due to the lighting being set to the always-on mode, a door not being properly closed, failure to press the lock button when exiting the vehicle, or forgetting to turn off the dome light switch after getting out of the car. Always-on Mode: The interior light staying on could be because the always-on mode is selected. Door Not Properly Closed: If a door is not properly closed, the interior light will remain on. Lock Button Not Pressed: If all doors are closed but the interior light is still on, pressing the lock button should turn it off. Switch Not Turned Off: If the dome light was not turned off after exiting the vehicle, it will stay on. Simply manually turn off the dome light switch. The solution is to first open the rear door of the car, sit in the middle of the back seat, look up above the seat for the dome light switch, and turn it off.
4
0
Share

What Causes the Smell of Burning After a Car Shuts Off?

The reasons for the smell of burning after a car shuts off are as follows: 1. New car: It is generally normal for a new car to have this smell. Various rubber and plastic components in a new car can produce this odor under high temperatures, which will gradually fade away with use. 2. Gasoline smell: Starting the car in winter, due to low temperatures, makes it harder to atomize gasoline, affecting combustion. Some unburned gasoline molecules may be expelled through the exhaust pipe and then enter the car via the external circulation. 3. Brake pad friction smell: If the handbrake is not fully released, the brake pads will continuously rub while driving, producing a metallic burnt smell. 4. Exhaust pipe scraping: The exhaust pipe can get very hot during driving. If a plastic bag sticks to it, the plastic may melt, producing a burnt rubber smell.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.