How to eliminate the TC slash yellow light displayed on a Buick?

1 Answers
IkerRose
07/25/25 10:42am
When a Buick displays a TC slash yellow light, it indicates that the vehicle's traction control system is either turned off or malfunctioning. The solution is to turn on the traction control system. If the system cannot be activated, it is necessary to inspect the traction control system's sensors or the vehicle's onboard computer to identify and resolve the issue, thereby eliminating the warning light. The following are common causes for the TC light to illuminate: 1. Solenoid valve malfunction; 2. Dirty engine oil clogging the solenoid valve filter; 3. Wear on the actuator gear and impeller leading to oil pressure leakage and triggering the alarm; 4. Dirty throttle body with an opening reaching 20%, causing the engine computer to mistakenly diagnose a TC fault.
Was this review help?
19
5
Share
More Forum Discussions

What is the fuel consumption of the Suzuki Handao 150?

The fuel consumption of the Suzuki Hanjun 150 is 6L/100km. The relevant introduction about car fuel consumption is as follows: Calculation formula for fuel consumption and how to calculate fuel consumption per kilometer: The calculation formula is: Fuel consumption per 100 kilometers = Fuel consumption (liters) / Distance traveled (kilometers) x 100. First, reset the odometer to zero, then fill up with a round amount of fuel, and continue driving. When the fuel indicator light comes on again, note how many kilometers have been traveled to calculate the fuel consumption per kilometer. Meaning of fuel consumption: Fuel consumption refers to the fuel economy indicator of a car when driving at a constant speed on good road conditions. Since driving at a constant speed is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator, and the fuel consumption per 100 kilometers indicated in the manuals of domestically produced cars is generally the constant-speed fuel consumption.
15
4
Share

How to Put the Ford Escort Jack Back in Place?

Actually, lowering the jack is similar to raising it. Connect the included wrench and sleeve to the rear of the jack. Then simply rotate to lower the jack's height. However, be careful not to use excessive force when operating the jack.
19
2
Share

What brand is the VDO fuel pump?

VDO fuel pump is a renowned German automotive electronics brand, specializing in automotive electronic products such as instruments, sensors, car audio systems, and electronic throttles. It was formerly part of Siemens and is now owned by Continental AG. Introduction to the mechanical diaphragm-driven fuel pump: The diaphragm-type fuel pump features a simple structure. However, due to the influence of engine heat, special attention must be paid to ensuring fuel delivery performance at high temperatures and the durability of the rubber diaphragm against heat and fuel. The electric fuel pump, on the other hand, is not driven by the camshaft but operates through electromagnetic force to repeatedly actuate the pump diaphragm. This type of electric pump allows flexible installation positioning and helps prevent vapor lock. Introduction to the electrically-driven fuel pump: The main installation types of electric fuel pumps for fuel-injected engines include in-line installation in the fuel supply line or in-tank installation. The former offers greater flexibility in placement, eliminates the need for specialized fuel tank design, and facilitates easy installation and removal. However, it has a longer suction line prone to vapor lock, produces more operational noise, and requires absolute leak-proof performance. This type is less commonly used in modern vehicles. The latter features simpler fuel lines, lower noise levels, and less stringent leakage requirements, making it the current mainstream trend.
8
0
Share

What is the fuel consumption of a 1.6L engine idling with AC on for one hour?

1.6L engine idling with AC on for one hour consumes approximately 1.4-2.5 liters of fuel. Idling with AC on is very fuel-intensive because the compressor relies on the engine's idle operation, leading to incomplete gasoline combustion and carbon deposits. In severe cases, it can also produce toxic substances. Incompletely burned gasoline generates carbon monoxide and other toxic substances. If the car doors and windows remain closed for a long time, exhaust fumes can enter the sealed cabin, accumulating to a level that may cause carbon monoxide poisoning. Introduction to car idling: Idling is an operating condition of a car, referring to the engine running in neutral. The engine speed during idling is called the idle speed. The idle speed can be adjusted by modifying the throttle opening size. When the engine is running, if the accelerator pedal is fully released, the engine enters the idle state. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this can cause premature engine wear. It is best to have the idle speed adjusted at an automotive repair facility. Classification of car idling: Normal idle - when the vehicle is parked and the engine is started, the minimum stable engine speed is called parking idle; Driving idle - when the car is in gear, without pressing the accelerator pedal or releasing it during driving, maintaining the minimum throttle opening, the engine speed matches the parking idle speed, which is referred to as driving idle.
16
1
Share

Why was the Dunlop LM705 discontinued?

Dunlop LM703 has not been discontinued but is being mass-produced in Changshu and Changsha regions. More relevant information is as follows: 1. Introduction to Dunlop: Dunlop LM705 is the upgraded version of LM703, also a quiet and comfortable green eco-friendly tire. Compared to LM703, LM705 has improved in both noise reduction and vibration filtering. Dunlop LM705 adopts an asymmetric tread pattern, optimized tread contour design, and increased tread blocks, ensuring the tread maintains a circular shape upon initial contact with the ground. This not only helps in noise reduction but also suppresses the vibration generated when the tire contacts the ground. 2. Dunlop Features: The noise level of Dunlop LM705 is reduced by 25.9% compared to previous products, promising a different driving experience. Additionally, Dunlop LM705 excels in wet grip performance, thanks to its wide main drainage grooves, which enhance the tire's water evacuation capability. 3. Dunlop Characteristics: Dunlop LM705 has relatively low hardness in both the sidewall and tread, with a softer tread contributing to comfort and quiet performance. It features a 5-ply tread crown, consisting of 2 polyester layers + 2 steel layers + 1 nylon layer, and 2 polyester layers in the sidewall, which is common for tires in this category.
17
5
Share

How to Choose Car Audio Speakers?

If you prefer sound quality, choose speakers that excel in sound quality. If you enjoy dynamic music, it is suitable to choose large-diameter, heavy bass speakers. There are many speaker brands on the market with varying prices. Big brands offer better product quality but are more expensive. You can choose speakers based on your specific conditions.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.