···
Log in / Register

How to eliminate the maintenance reminder for Haval H6?

4 Answers
Alexander
07/29/25 8:27am
Haval H6 eliminates the maintenance reminder by: 1. Locate the function button on the dashboard and select the maintenance reminder; 2. Press and hold the button for 5 seconds according to the prompt. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of: length 4615mm, width 1860mm, height 1720mm, wheelbase of 2680mm, fuel tank capacity of 58l, and curb weight of 1675kg. The 2021 Haval H6 features a front McPherson independent suspension and a rear double-wishbone independent suspension. It is equipped with a 1.5l turbocharged engine, delivering a maximum horsepower of 150ps, maximum power of 110kw, and maximum torque of 210nm, paired with a 6-speed manual transmission.
Was this review help?
10
1
Share
Arlene
08/12/25 5:24am
I've driven a Haval H6 for several years, and the method to clear the maintenance reminder is quite simple. First, turn off the engine. There's an OK button on the steering wheel, right? Press and hold it. Then turn the key to the ON position (dashboard lights up but engine doesn't start), hold for about 10 seconds, and you'll see the reminder disappear. This method works for most H6 models - I've tested it on 2018 to 2022 versions, and it's very effective. But I must say, don't just focus on clearing the reminder; actual maintenance is more important. Oil and filter checks must be kept up, otherwise the car can develop problems. Safe driving is the top priority - I always do this after maintenance, and it gives me peace of mind.
Was this review help?
1
5
Share
Expand All
DiTheo
10/05/25 6:26am
From a technical perspective, the maintenance reminder reset for the Haval H6 is accomplished through a system reset procedure. The steps are: after turning off the engine, hold the OK button, turn the ignition switch to the ON position (just enough to illuminate the dashboard lights), and maintain this for 8 to 12 seconds until the reset prompt appears. This design serves as a reminder for regular maintenance, such as oil change intervals. If there's no response, it might indicate button contact issues or software errors; consulting the vehicle manual or seeking professional diagnosis at a service center is recommended. Developing good daily driving habits can extend vehicle lifespan, such as checking tire pressure weekly.
Was this review help?
5
4
Share
Expand All
SanPiper
11/18/25 7:58am
Haha, this operation is super easy! Turn off the engine, press and hold the OK button, turn the key to ON without starting the engine, and just watch the dashboard until the prompt flashes and disappears. I succeeded on my first try, just like solving a puzzle game. The Haval H6's design is thoughtful—don't overcomplicate it; even beginners can manage. After finishing, take a drive to clear your mind, and remember to jot down the maintenance date in your notebook.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Can Wheel Alignment Solve Tire Wear Issues?

Tire wear issues can be resolved through wheel alignment. If a vehicle experiences uneven tire wear, also known as tire scrubbing, it indicates an abnormality in the wheel alignment, as under normal circumstances, tire wear should be uniform. Below is some additional information about wheel alignment: 1. Generally, after replacing or repairing components such as shock absorbers or steering systems, a wheel alignment is necessary. 2. Wheel alignment involves adjusting the geometric angles of the tires relative to the steering and suspension systems to ensure proper contact between the tires and the road surface. Additional Information: Wheel alignment adjustments include parameters such as camber angle, caster angle, toe angle, and kingpin inclination angle. The process can vary in duration due to the complexity and differences in each vehicle's alignment requirements.
13
5
Share

What RPM Should a Manual Transmission Maintain?

Manual transmission RPM should be maintained between 1500 and 3000. After starting, when the speed reaches 20 km/h, which corresponds to an RPM between 1500 and 2000, shift to 2nd gear. When the speed reaches 30 km/h, meaning the RPM exceeds 2000, shift to 3rd gear. When the speed reaches 50 km/h, which is when the RPM reaches 3000, shift to 4th gear. Below is some relevant information about manual transmissions: 1. A manual transmission is a type of transmission where the driver manually shifts gears by moving the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve the desired speed. 2. The working principle of a manual transmission involves using the shift fork to change the gear ratio or tooth ratio of the meshing gears, thereby altering the driving torque to suit different operating conditions.
8
5
Share

Why does the motorcycle sound muffled after warming up?

Motorcycle sounding muffled after warming up is mainly caused by the following two reasons: 1. Generally, pushrod engines are more prone to this situation. Pushrod engines use rigid pushrods to drive the valve rocker arms. Since the valve clearance is adjusted when the engine is cold and set as the standard, and components such as the engine cylinder block, cylinder head, pushrods, rocker arms, and camshaft are made of different materials, their expansion rates vary when heated. Therefore, the valve clearance in pushrod engines automatically increases slightly when the engine is warm, which can easily lead to valve noise. 2. When the engine is hot, the temperature rises, and the engine oil temperature also becomes very high. At high temperatures, the viscosity of the oil decreases, making the oil film thinner and reducing lubrication effectiveness. Additionally, the internal clearances of engine components change when the engine is hot, which can result in increased noise.
6
4
Share

How to Connect Phone Screen Mirroring Function for BMW 740?

For BMW 740 phone screen mirroring, you can connect via data cable by matching the Bluetooth with the car system, or directly use WiFi for screen mirroring. Using a phone data cable for BMW screen mirroring: Insert one end of the data cable into your phone and the other end into the car's USB port. Then, enable the necessary permissions in your phone's settings. Both the car display and phone screen will show a successful connection prompt. If the connection fails, go to the developer options in your phone's settings, click on USB debugging, and try connecting again. Using WiFi for BMW screen mirroring: WiFi connection is simpler. First, download the Carlife app on your phone. Then, open the app on your phone and connect it with the Carlife on the car's central control display. Once the connection is successful, both the phone and car display will show a prompt, and you can start using the screen mirroring function.
10
3
Share

What is the sequence of pressing the clutch, shifting gears, and ignition when starting a car?

When starting a car, the main sequence is to first press the clutch pedal all the way down, then ignite the engine, and finally shift into gear. Starting precautions: 1. Get in the car, fasten the seat belt, adjust the seat, and quickly press the clutch pedal all the way down. 2. Shift into first gear, turn on the left turn signal, check the surroundings, release the handbrake, and quickly lift the clutch pedal to the semi-engagement position with a slight pause. 3. Slowly lift the clutch pedal while gently pressing the accelerator pedal to allow the car to start smoothly. Additional tips: 1. If the engine sound becomes lower, promptly press the accelerator or release the parking brake pedal; if the engine sound becomes higher, promptly reduce the accelerator or lift the clutch pedal. 2. Clutch release technique: Observe the car's movement state. If the vehicle shows signs of shaking, release the brake at this moment, and the car will start slowly; if releasing the brake causes the car to roll, promptly press the brake pedal.
15
5
Share

What is the difference between Tiptronic and Dual Clutch?

The differences between Tiptronic and Dual Clutch are as follows: 1. In terms of fuel economy: The dual-clutch transmission is equivalent to two automatic clutches, which is generally more fuel-efficient. 2. For power performance: Tiptronic is developed based on traditional automatic transmissions, with relatively slower response speeds overall. Due to engine protection considerations, its power performance is relatively weaker. Other differences are as follows: 1. In terms of cost: Tiptronic is generally used in some mid-to-high-end cars, with relatively faster gear shifting. Dual-clutch transmissions are usually used in some high-end models and sports cars, with very expensive components, making Tiptronic slightly better in terms of cost. 2. In terms of driving pleasure: Tiptronic is generally more inclined towards automatic transmissions, while dual-clutch transmissions are more inclined towards manual transmissions, offering better overall driving pleasure.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.