How to eliminate the ABS light?

[LilahLee]

ABS elimination methods can be addressed based on the following scenarios: constant illumination of the warning light, intermittent illumination, extinguishing with engine operation, or illumination during driving: If the ABS warning light is constantly on, clean the dirt on the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal operation. Check the wiring connections and reconnect any loose parts. If the ABS warning light intermittently illuminates and extinguishes during acceleration, check the battery specific gravity; inspect the charging system; and examine the power supply (such as voltage relays or poor power contacts). If the ABS warning light remains on after engine start until the engine is turned off (IGFF), loosen the grounding screw of the hydraulic valve body, then retighten the fixing screw and clean the contact surface if necessary; check if the connector gap has increased; replace the ABS or ABS/ASR computer. If the ABS warning light illuminates during high-speed driving, start the engine, press the brake pedal, use a finger to push the brake switch linkage all the way down, then release the brake pedal to complete the self-setting position. Replace the brake light switch.