How to Eliminate Odors Inside a Car?

What is the purpose of tire rotation?

Tire rotation is performed to avoid uneven tire wear caused by the following four factors: 1. Asymmetric vehicle weight distribution: For example, most vehicles have front-mounted engines and transmissions, and fuel tanks, batteries, and driver positions are not symmetrically distributed. This leads to uneven force distribution on the wheels, causing tires under greater load to wear out faster. 2. Different turning speeds: According to driving habits in China, left turns are generally taken at higher speeds than right turns. This results in greater load-bearing on the right-side tires compared to the left, accelerating wear on the left-side tires. 3. Influence of wheel camber: To facilitate steering and reduce wheel bearing load, most vehicles have front wheels designed with a camber angle, creating an inverted "V" shape between the tire and the ground. When the vehicle is mostly unloaded, the outer edges of the front tires wear faster than the inner edges. 4. Effect of braking force distribution: To improve braking performance, the braking force on the front wheels is generally much greater than on the rear wheels. This also causes the front tires to wear faster than the rear tires.

7

4

Share

What to Do When Entering an Unmanned Parking Lot with Temporary License Plates?

Temporary license plates can enter unmanned parking lots. Here are the relevant details: 1. The parking lot's charging system will automatically recognize the plates, so there's no need to worry about whether you can enter the parking lot. With the continuous development of production technology, unmanned parking charging systems have gradually improved, enabling parking lot management without attendants. Generally, this method is referred to as an intelligent parking management system. 2. The intelligent parking management system mainly recognizes vehicles through their license plates and starts charging upon identification. For cars without installed license plates, entry can be achieved by scanning a QR code with a mobile phone, making the unmanned management system very comprehensive. 3. When exiting the parking lot, payment can be made manually or through self-service. The license plate recognition device automatically identifies the plate and calculates the vehicle's parking duration to determine the fee. If the parking lot fails to recognize the plate normally, you can seek assistance from staff, as some intelligent parking lots have security or staff members. It's important to note that whether a car uses temporary or official license plates, traffic rules must be followed while driving, and good car usage habits should be maintained.

4

2

Share

Do I need to turn on Bluetooth when using ETC?

When using ETC on highways, there is no need to turn on the car's Bluetooth or mobile phone Bluetooth. The ETC junction box installed in our vehicles has a short-range communication response system that automatically communicates with sensors on the road, so neither the car nor the phone needs Bluetooth enabled. ETC is currently provided by 8 domestic manufacturers, and some ETC terminals can only be installed via mobile Bluetooth during setup, but Bluetooth is not required during actual use. ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, the following documents are required: the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, a valid ID card of the agent is also required. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp; a bank card for deducting highway tolls; the applicant must be between 18 and 60 years old; and the vehicle must be registered under an individual's name. Documents required for a company-owned vehicle: An introduction letter from the vehicle owner (with company seal); photocopy of the organization code certificate or business license (with company seal); original ID card of the agent; original vehicle registration certificate; and the vehicle that needs ETC installation. How ETC works: The vehicle-mounted electronic tag installed on the windshield communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, the system settles payments with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay. Benefits of installing ETC: Time-saving: Avoid the hassle of waiting in line; Green and eco-friendly: Low-carbon solution, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions; Cost-saving: Reduces vehicle startup and braking frequency, minimizing wear and fuel consumption, and users can enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC more updated, faster, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

11

2

Share

How to Adjust Volkswagen Sound Settings for Optimal Performance?

Method to optimize the Volkswagen Sagitar audio settings: Adjust the bass to between 6 and 8, the midrange to between 0 and 3, the treble to between 6 and 8, and set the sound field to the center. The Sagitar audio settings can be found in the central control screen's settings menu; click on 'Audio' to access the sound effect settings. The equalizer includes three categories: treble, midrange, and bass, which can be adjusted by touching the screen or directly selecting the desired effect. The car audio volume automatically adjusts based on speed: as the vehicle speed increases, the audio volume increases accordingly; as the speed decreases, the volume also decreases. The setup procedure is as follows: Press and hold the 'SET' button on the audio panel for about 2 seconds until a 'beep' is heard, entering the car audio initialization mode. The 'SETUP' indicator will appear at the bottom left of the audio LCD screen. Briefly press the arrow button to select the setting you wish to change. To enable automatic volume adjustment with speed, adjust until 'GALA' appears. Select the volume adjustment range: Rotate the volume knob to choose the desired setting from '1-9'. A higher number indicates a more noticeable change in audio volume with speed (select 9 for city driving, 7-8 for highways). Press and hold the 'SET' button again until a 'beep' is heard to automatically save the settings. The setup is now complete. From then on, the volume will automatically increase as the vehicle speed increases and return to the original level when the speed decreases.

2

Share

Automobile DIY Spray Painting Tutorial?

Automobile DIY spray painting tutorial is divided into the following ten steps: 1. First, clean the car body with water. 2. Use a sanding block to flatten the sandpaper, then wet sand the edges of the scratch. Sand until the edges are smooth and the transition from the paint surface to the primer is gradual. 3. Pour the filler onto a spreader and apply it evenly over the scratch surface. The filler should be slightly higher than the paint surface. After application, wait for the filler to dry completely. 4. Once the filler is dry, use sandpaper with some water to sand the filler. Sand until the filler surface is flush with the paint surface, and there are no edges when touched, making it smooth. Clean and dry the area before proceeding to the next step. 5. Before spraying paint, mask off important components around the scratch. 6. After masking, you can start spraying paint. For plastic parts, it is recommended to apply a primer first to enhance the adhesion of the spray paint on the plastic. 7. When spraying the color paint, pay attention to the spraying technique. Wait 3-5 minutes between each layer, then apply the next layer. Repeat the process multiple times until the scratch and filler are completely covered, and the color matches the surrounding paint. 8. Wait for 20 minutes for the color paint to dry, then use a scratch repair agent to sand the color paint. After sanding, prepare for the next step. 9. Spray 2-3 layers of blending clear coat at the junction between the new paint and the original car paint to make the transition more natural. 10. Finally, spray clear coat to make the paint surface look more glossy. Apply multiple layers of clear coat, with a half-minute interval between each layer. Once done, the entire spray painting process is complete.

13

5

Share

Can a new battery still be used after being stored for 4 years?

Generally, a new battery cannot be used after being stored for 4 years. Here are the relevant details: 1. The shelf life of a new battery is typically one to two years. If stored for too long, it is prone to leakage and would require repair before use. 2. A battery, also known as a storage battery, is a type of cell that works by converting chemical energy into electrical energy. 3. Usually, when people refer to a battery, they mean a lead-acid battery. This is a type of storage battery primarily made of lead and its oxides, with a sulfuric acid solution as the electrolyte.

18

4

Share

How to Eliminate Odors Inside a Car?

What is the purpose of tire rotation?

What to Do When Entering an Unmanned Parking Lot with Temporary License Plates?

Do I need to turn on Bluetooth when using ETC?

How to Adjust Volkswagen Sound Settings for Optimal Performance?

Automobile DIY Spray Painting Tutorial?

Can a new battery still be used after being stored for 4 years?

Where is the cigarette lighter fuse in the Trumpchi GS4?

How to reset the tire pressure monitoring system on the Highlander?

What is the fuel tank capacity of the Nissan Patrol 4.0?

What does it mean for a 4S shop to handle license plate registration?