How to eliminate noise in Tiguan?

1 Answers
DeHailey
07/30/25 9:45am
Methods to eliminate noise in Tiguan are as follows: 1. To reduce engine noise, attach sound-absorbing materials under the hood. 2. To reduce wind noise, install sealing strips or perform door sound insulation. 3. To reduce tire noise, replace with comfort-oriented tires. Details are as follows: 1. Engine noise is generated and transmitted into the cabin through the front fenders, hood, firewall, and exhaust pipe as the engine speed varies. Therefore, vibration damping and sealing these areas can effectively control and reduce engine compartment noise. 2. Wind noise occurs during vehicle movement due to friction between rapidly flowing air and the car body. It enters the cabin through door gaps, so only by enhancing the vehicle's tightness and sound insulation can it be reduced. 3. Tire noise generally consists of three components: air noise from airflow in tire tread gaps and surrounding air disturbance, vibration noise from the tire body and tread patterns (particularly noticeable as road noise and uneven surface noise), and amplified resonance noise formed by friction/impact between tread and ground (especially on bumpy roads) combined with vibrations from components like fenders and mudguards.
Was this review help?
14
3
Share
More Forum Discussions

How many points are deducted for driving on the emergency lane on the highway?

Driving a motor vehicle illegally on the emergency lane of a highway or urban expressway will result in a deduction of 6 points per violation. The following situations allow the use of the emergency lane: Vehicle malfunction: In cases such as a flat tire or engine failure, the vehicle can move to the emergency lane. At the same time, the hazard warning lights must be turned on, and a warning sign should be placed 150 meters behind the vehicle, followed by calling the police. Ps: Failure to follow these procedures may result in penalties, even if the vehicle is malfunctioning. Sudden illness of a passenger: If the driver or any passenger suddenly falls ill while on the highway, the emergency lane can be used. However, hospital documents must be retained to explain the situation to the police afterward. Accident-involved vehicles: In cases where two vehicles have a minor collision with no injuries and the police have been notified, the vehicles can be moved to the emergency lane to wait for the traffic police. Ps: The hazard warning lights must be turned on, and a warning sign should be placed 150 meters behind the vehicle. Passengers should wait in a safe location.
8
1
Share

What is the maximum speed limit in tunnels?

Tunnel speed is limited to a maximum of 40 kilometers per hour. During severe weather conditions and in special sections such as bridges and tunnels, the speed limit is subject to the on-site speed limit signs. Speed calculation formula: The calculation method for speed is V=S/t, which represents the distance traveled per unit of time. The speedometer uses data monitored by sensors, calculating the actual speed of the vehicle based on the number of wheel rotations, diameter, and time. Precautions for driving into tunnels: Reduce speed and turn on lights before entering the tunnel, avoid using high beams, strictly adhere to speed limits, do not honk inside the tunnel, do not exit the vehicle for repairs, maintain a safe distance, do not change lanes, accelerate promptly after exiting the tunnel, place warning signs quickly if the vehicle breaks down in the tunnel, and evacuate all passengers.
20
5
Share

How Long After Car Paint Repair Can It Be Exposed to Rain?

It is recommended to wait at least 24 hours after car paint repair before exposing the vehicle to rain or washing it. If the paint has been baked, it can be exposed to rain or washed after 2 hours. Reasons why freshly painted cars should avoid rain: Newly applied paint is still soft, and exposure to rain can affect its smoothness. Additionally, rain before the paint fully cures may compromise the protective film formed after curing, potentially leading to paint cracking in severe cases. Solutions if rain occurs after painting: If the paint was applied at a 4S dealership, there's usually minimal impact, though the paint's glossiness might be slightly reduced. Regular maintenance and waxing can restore its shine. For vehicles painted at general repair shops or without baking, wait about a week for the paint to fully cure before inspection. If water marks appear, use 1500-grit sandpaper with a sanding block and water to polish them out, followed by washing and polishing. This method typically removes water marks; if unsuccessful, repainting may be necessary.
1
3
Share

What is the average fuel consumption of a sedan?

Generally, the fuel consumption for a sedan with a 1.0-liter engine is around 5 liters per 100 kilometers, while a 1.5-1.6-liter engine consumes approximately 7 liters per 100 kilometers. Starting slowly can save fuel: Many drivers tend to accelerate aggressively when starting, which significantly increases fuel consumption. Therefore, it is advisable to start the car gently to save fuel and create a smoother driving environment. Maintaining a steady speed can save fuel: Most vehicles achieve lower fuel consumption at speeds between 60-90 km/h, known as the economical speed range. Keeping the vehicle within this speed range when possible can save fuel. Fuel consumption increases when driving too fast or too slow. Driving too slowly prevents complete fuel combustion, while driving too fast increases air resistance, leading to higher fuel consumption. Light acceleration can save fuel: Accelerate gradually and avoid flooring the accelerator, as this wastes fuel and causes additional wear on the engine.
11
4
Share

Can Enlarged Rims Be Registered Through Unauthorized Agents?

Enlarged rims cannot be registered through unauthorized agents, as the management of motor vehicles is handled by the traffic management departments of public security authorities, not by unauthorized agents. There are no benefits to changing rim sizes: In fact, while increasing rim size may make the car slightly more eye-catching, it poses safety hazards. Choosing larger rims without altering the wheel diameter inevitably requires thinner tires, which are prone to bulging and result in higher maintenance costs later on. Additionally, thinner tires, although they may improve vehicle handling, can negatively impact ride comfort. Scope of illegal vehicle modifications: Any changes to the color, model, performance, purpose, or structure of a licensed motor vehicle, including replacing the chassis, body, or engine, must be reported to the vehicle management office for modification registration. Modifications such as changing rims, adding wide body kits, or altering exhaust systems are generally not permitted.
4
3
Share

Can You Still Drive When the Engine Emission Control System is Detected?

Can You Still Drive When the Engine Emission Control System is Detected? Causes of Exhaust System Failure: The illumination of the engine exhaust system fault light is mostly caused by damage to the oxygen sensor in the three-way catalytic system or poisoning of the three-way catalytic converter due to poor fuel quality in the domestic market. If this light comes on while driving, immediately reduce speed and proceed to the nearest service station for inspection and repair. Methods to Determine Exhaust Gas Quality: The exhaust emission control system indicator light will illuminate when the ignition switch is turned on and must go off after the engine is started. If the indicator light does not go off after starting the engine or comes on or flashes while driving, it indicates that there may be unstable operation in the emission control system and the exhaust gas quality exceeds the standard.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.