How to Eliminate Fog on the Car Windshield?

1 Answers
StBennett
07/29/25 4:15pm
Methods to eliminate fog on the car windshield: 1. Turn on the front window defogging mode, set the fan speed to maximum, turn on the AC switch, and adjust the temperature to the lowest; 2. When fogging occurs, you can activate the one-touch defogging function; 3. Opening the window can increase air convection, reduce the temperature difference between inside and outside the car, and weaken the conditions for fog formation; 4. Use a defogging agent and spray it evenly on the glass surface. In summer, when the air conditioner is on, the temperature of the front windshield will be lower than the outdoor temperature. If the outdoor air humidity is high, condensation will form on the outer surface of the glass. In winter, the windshield fogs up because the temperature and humidity inside the car are higher than the outdoor air after the air conditioner is turned on for heating, while the temperature of the front windshield is lower than the indoor temperature, resulting in condensation on the inner surface of the glass.
Was this review help?
5
0
Share
More Forum Discussions

Why does left reverse parking often hit the left corner of the garage?

Hitting the left corner during left reverse parking is usually caused by turning the steering wheel to the left too early. Wait until the car is about 30 centimeters away before fully turning the steering wheel left to avoid hitting the corner and enter the garage smoothly. Below is more information about reverse parking: Introduction: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is a key evaluation point in the driver's test, requiring the driver to correctly reverse the vehicle into the garage from both sides while in motion. Evaluation criteria: Failing to follow the designated route or sequence results in disqualification. Having the vehicle body cross the line or failing to park properly leads to disqualification. Exceeding 210 seconds without completing the reverse parking results in disqualification. Stopping midway deducts 5 points each time.
9
1
Share

What is the displacement of the Audi A6 35FSI?

Audi A6's 35TFSI engine has a displacement of 2.8 liters. The Audi A6 35TFSI is equipped with a 2.8-liter turbocharged engine, delivering 190 horsepower and a maximum torque of 320 Nm. The maximum power is achieved at 4200 to 6200 rpm, and the maximum torque is available from 1400 to 4100 rpm. Below is an introduction about TFSI: TFSI represents an engine technology. TFSI stands for T (Turbocharger) FSI (Fuel-Stratified-Injection, which means fuel stratified injection technology in Chinese), and it translates to turbocharged fuel stratified injection engine in Chinese. However, since the fuel in China does not meet the standard for 'fuel stratified combustion,' the meaning of TFSI has become turbocharged direct injection.
14
3
Share

Is the Volkswagen Lavida seriously downgraded?

Volkswagen Lavida is seriously downgraded. Vehicle Performance: The overall exterior design is quite elegant and composed, especially the front grille and headlight cluster design, combined with the sleek body, giving a visual impression of a 'mini Passat'. The body lines, wheel design, hood line treatment, rear design, and taillight cluster design are all relatively novel and eye-catching, giving a sense of a B-segment car. The well-structured interior design is quite upscale. Vehicle Appearance: Simple and easy to maintain. Although the materials used are average, the attention to detail and color coordination make it visually appealing without looking cheap. The power is decent, whether driving in the city or on the highway, and the fuel consumption is economical. With a market discount of 20,000 to 30,000 yuan, it is quite attractive.
4
3
Share

Yield to the Left or Yield to the Right?

When turning, vehicles turning right should yield to those turning left. The following are the right-of-way rules: Rule 1: When both vehicles are going straight, the vehicle coming from the right side of the road has the right of way, meaning the left-side vehicle yields to the right-side vehicle. Rule 2: When vehicles are coming from opposite directions, the vehicle turning right should yield to the one turning left. Additional information: Meeting oncoming traffic note 1: When meeting oncoming traffic, pay attention to the condition and movement of surrounding vehicles and pedestrians. If pedestrians are blocked by an oncoming vehicle, immediately sound the horn to alert them. Meeting oncoming traffic note 2: If meeting oncoming traffic on a road without a central guardrail, reduce speed and choose a wider section of the road to pass through slowly.
19
5
Share

What type of engine oil does the Roewe RX5 use?

Roewe RX5 uses 5w30 fully synthetic engine oil. The following is an introduction to the relevant content: The functions of engine oil are: lubrication, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, shock absorption, and anti-wear. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, wheelbase of 2700mm, and minimum ground clearance of 175mm. The 2020 Roewe RX5 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, maximum torque of 250Nm, maximum power of 124kW, and is paired with a 6-speed manual transmission.
10
2
Share

Mercedes-Benz B200 Steering Gear Repair Cost?

The cost is approximately in the range of 2000 to 4000. Mercedes-Benz B200 Steering Gear Removal and Installation Method: Check if there are two holes under the steering wheel. If there are, insert a straight rod into them and push simultaneously to release. If there are no holes but bolts, use the corresponding hex key or similar tool. Reasons for Mercedes-Benz B200 Steering Gear Damage: After disassembly, it was found that the lubricating grease inside had completely deteriorated, and the internal bearings and related plastic components were worn out. Steering Gear Maintenance Methods: Avoid turning the steering wheel while the vehicle is stationary; try to steer only after the vehicle is in motion. When parking, return the steering wheel to the center position to prevent unnecessary load on the suspension system and tires. When making a U-turn, try to avoid turning the steering wheel to its extreme position.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.