How to Drive Through Deep Water on Rainy Days?

1 Answers
AlanaFitz
07/29/25 7:24pm
When driving through deep water on rainy days, proceed slowly. Here are some relevant tips: 1. Brake gently: Always apply the brakes gently in rainy conditions to avoid sudden stops. Most sedans can handle water depths of 15-20 cm in urban areas without issues. The key is to maintain a slow speed, avoid splashing water, and use a low gear. 2. Precautions: Never drive through ditches or puddles at high speed. Excessive speed can cause water to splash, increasing the actual depth of water your car is navigating and potentially leading to engine flooding. Avoid driving through water if it rises above the centerline of your tires. Raindrops on the side mirrors can create blind spots for drivers, so clean them regularly. When changing lanes, drivers should be extra cautious. In cases of heavy rain or severe thunderstorms, park your vehicle in a higher area to prevent flooding.
Was this review help?
15
3
Share
More Forum Discussions

What type of gasoline should a Mercedes-Benz C200 use?

The Mercedes-Benz C200 requires 95-octane gasoline or higher to meet its engine's requirements. Taking the 2018 Mercedes-Benz C200 as an example, it is a mid-size sedan with the following dimensions: length 4714mm, width 1810mm, height 1442mm, and a wheelbase of 2840mm. The 2018 Mercedes-Benz C200 features a multi-link independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum torque of 300Nm. It is paired with a 9-speed automatic transmission.
10
3
Share

What Are the Principles of Vehicle Maintenance?

Automobile maintenance should adhere to the principle of prevention first, abandoning the concept of repairing instead of maintaining. Maintenance means keeping and caring, maintaining the vehicle in good working condition through good usage habits. Caring involves keeping the vehicle in good working condition through operations such as inspection, adjustment, tightening, lubrication, and replacement. The related introduction is as follows: 1. Purpose of maintenance: The purpose of automobile maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life. Modern automobile maintenance mainly includes the maintenance of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. Daily maintenance: Daily maintenance, also known as daily upkeep, is the work done before driving, during driving, and after parking, which is the responsibility of the driver. The main content of the work is cleaning, replenishment, and safety inspection, which are regular and necessary tasks to keep the vehicle in normal working condition. Primary maintenance is performed by professional maintenance enterprises. In addition to daily maintenance tasks, the main content of the work is cleaning, lubrication, and tightening, as well as inspecting safety components such as brakes and controls. Secondary maintenance is performed by professional maintenance enterprises. In addition to primary maintenance tasks, the main content of the work is inspection and adjustment, as well as dismantling and inspecting tires for tire rotation. Before secondary maintenance, diagnostic testing and technical evaluation should be conducted to determine additional tasks or minor repairs based on the results, which are carried out together with the secondary maintenance. The maintenance cycle for each level depends on the type of vehicle and operating conditions.
20
3
Share

What is the Travel Mode of Car Lights?

The travel mode of car lights refers to the fact that in China, vehicles drive on the right side of the road, and the headlights are set with the left beam lower and the right beam higher. In some countries where driving is on the left side, oncoming traffic comes from the right, and the headlight adjustment is the opposite. To avoid dazzling oncoming vehicles at night, the travel mode for car lights was introduced. The functions of car lights are: 1. Turn on the turn signal to alert following vehicles and reduce rear-end collisions; 2. Improve visibility of road conditions to enhance driving safety; 3. Inform the vehicles behind that you are braking and they should slow down; 4. In emergencies or bad weather with low visibility, turn on the hazard lights to alert other vehicles.
20
0
Share

What is the BMW i3?

BMW i3 is a pure electric vehicle, which is a compact car. Taking the 2020 BMW i3 Fast Charge Comfort model as an example, its body dimensions are: length 4020mm, width 1775mm, height 1600mm, wheelbase 2570mm, and trunk capacity 260l. The 2020 BMW i3 Fast Charge Comfort model features a MacPherson strut front suspension and a multi-link rear suspension, with electric power steering. The total motor power is 125kw, and the total motor torque is 250nm, matched with a single-speed fixed gear ratio transmission.
1
4
Share

Why is there a noise when turning the steering wheel?

Noise during steering wheel rotation can be attributed to the following faults: 1. Continuous friction sound when turning the steering wheel: This noise is likely caused by a faulty plane bearing (also called pressure bearing) located beneath the steering wheel. The plane bearing is positioned at the connection point between the top of the front shock absorber and the vehicle body. Its function is to facilitate rotation between the shock absorber (which turns with the wheel) and the vehicle body during steering. This abnormal noise requires prompt inspection and repair, as it may eventually prevent the steering wheel from turning. 2. Noise occurring when the steering wheel is turned to a certain degree: This situation is probably due to a loose stabilizer link ball joint. During steering, the front suspension system undergoes continuous force changes and internal stress accumulation. When steering reaches a certain point, the increased stress causes instantaneous displacement at the loose ball joint, resulting in vibration and noise. When turning at low speeds or while stationary, the steering and suspension systems bear maximum stress. As the steering angle increases, this stress causes slippage at loose components, generating vibrations. 3. Steering wheel vibration during idle driving: Normally, the steering wheel shouldn't vibrate during idle operation - even minor vibrations indicate no significant issues. However, pronounced vibration likely suggests problems with the steering wheel transmission device or loose bolts securing this mechanism. 4. Failure to automatically return after a steering wheel noise: This condition strongly indicates a faulty or aged steering gear, requiring immediate inspection and replacement.
2
3
Share

Can 95 Octane and 92 Octane Gasoline Be Mixed?

95 octane and 92 octane gasoline should not be mixed. Long-term mixing of different octane ratings can affect the lifespan of the car's ignition system, fuel injectors, and spark plugs. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum, used as fuel, and appears as a transparent liquid. 95 octane gasoline consists of 95% isooctane and 5% n-heptane, while 92 octane gasoline consists of 92% isooctane and 8% n-heptane. The main difference between the two lies in the purity of isooctane—the higher the purity of isooctane, the stronger the gasoline's anti-knock performance.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.