How to Drive the Roewe i5 Automatic Transmission?

1 Answers
DiSarah
07/29/25 10:15am
Press the brake pedal with your right foot. To move forward, shift the gear lever to the D position; to reverse, shift it to the R position. Release the handbrake, slowly release the brake pedal, and move your right foot to the accelerator pedal, gently pressing to proceed. Below is an introduction to the Roewe i5: 1. It is a high-performance internet-connected mid-size sedan under the Roewe brand, launched on October 26, 2018, offering 9 models with two powertrain options: 1.5L and 1.5T. 2. Based on the 'Rhythm' family design philosophy and elements derived from the Vision-R concept car. The 1.5T model is equipped with SAIC's Blue Core SGE20T all-aluminum mid-mounted direct-injection high-efficiency engine, delivering a maximum power of 124 kW and a peak torque of 250 N·m, with a fuel consumption as low as 5.5 liters per 100 km. 3. Depending on the trim level, the Roewe i5 features two styles for rear badges, lower guard design, fog light trim, exterior rearview mirrors, and lower grille, with four wheel rim styles available. Options include a sunroof, spoiler, and door trim. 4. The Roewe i5 is equipped with a 10.1-inch high-definition touch capacitive screen and a 12.3-inch digital interactive instrument cluster, featuring the Internet Car Intelligent System 2.0 - the AliOS-based Banma Zhixing solution.
Was this review help?
7
4
Share
More Forum Discussions

What are the reasons why a car cannot run?

The reasons why a car cannot run: 1. The ignition timing advance angle of the cylinder is inaccurate; 2. The spark plugs are not working or there is a cylinder misfire; 3. The fuel supply system is not smooth or blocked, and the fuel pump has an air leak; 4. The clutch engagement is incomplete or the clutch has damaged rivets causing eccentric engagement; 5. The engine crankshaft clearance is too large; 6. The clearance between the output shaft and the differential is too large or damaged; 7. Check for any cracking or backfiring sounds. If present, it indicates the air-fuel mixture ratio is too rich or too lean, and the mixture ratio should be adjusted; 8. The fuel injectors are too dirty or the carburetor is too dirty. For fuel-injected cars, clean the injectors. For carbureted cars, disassemble and clean the carburetor and adjust the fuel level.
7
1
Share

How to Identify a Stock Car?

Methods to identify a stock car include: 1. Check the vehicle identification plate; 2. Inspect tire wear and manufacturing date; 3. Examine the cleanliness of the exhaust pipe inner wall; 4. Look for dust in the engine compartment, check for deformation or discoloration of components, their alignment, and any signs of removal; 5. Inspect the vehicle's rubber parts for aging or detachment; 6. Check the foot pedals for wear or excessive dust in the gaps; 7. Ensure the paint on the lower edge of the door frame is intact. A stock car refers to a vehicle that has remained unsold for over 6 months in inventory, and such cars should undergo regular cleaning, maintenance, and battery charging.
19
1
Share

How to Adjust the Time on a 2010 Teana?

2010 Teana time adjustment method: After turning on, the CLK button displays and sets the time. Press and hold CLK for about 5 seconds until the time display flashes on the screen. Use the adjustment knob (turn left to decrease, turn right to increase) to set the time, then press CLK to confirm. Here is some related information: 1. The Teana's body dimensions have been lengthened and widened. With a body length of 4901mm, it appears very sleek with the rear styling and waistline. 2. The 8-inch LCD display on the center console is large enough, but the display quality doesn't look premium. The interface design is relatively simple and clearly layered, making it easy to use even for first-time users. Functionally, it offers rich multimedia playback features and connectivity applications, including in-car apps, in-car WiFi, and common internet functions, but it does not support CarPlay.
16
5
Share

Can the BYD F3 be used for Didi ride-hailing?

The BYD F3 can be used for Didi Express. The application requirements are as follows: 1. License plate requirements: The joining driver must own their own car with a local license plate. Additionally, the car must have a base price of over 70,000 RMB and be less than 8 years old. 2. Driving experience: The joining driver must possess a C1 or higher driver's license with at least 3 years of driving experience, be between 22 and 60 years old, and drive a vehicle that matches their permitted driving category when joining. 3. Personal requirements: The joining driver must hold an ID card, vehicle registration certificate, and driver's license simultaneously, have no bad records or criminal history, be in good health, capable of fulfilling duties, and have a strong sense of responsibility.
15
4
Share

How to Distinguish Between Mercedes-Benz C-Class and E-Class?

The differences between Mercedes-Benz C-Class and E-Class: 1. Different positioning: The Mercedes-Benz C-Class is only the entry-level luxury car series in the Mercedes-Benz brand; while the E-Class is the main mid-to-large luxury sedan under Mercedes-Benz. 2. Different exterior and interior designs: The exterior and interior designs of the Mercedes-Benz C-Class are more youthful; the E-Class tends more towards creating a luxurious atmosphere to highlight the elegance of a mid-to-large luxury sedan. 3. Different powertrains: As an entry-level model, the Mercedes-Benz C-Class has three models—C180, C260, and C300—corresponding to 1.6T, 1.5T+48V mild hybrid, and 2.0T powertrains respectively. The Mercedes-Benz E-Class has five models—E200, E260, E300, E350, and E320—corresponding to 2.0T low power, 2.0T low power+48V mild hybrid, 2.0T, 2.0T high power+48V mild hybrid, and 3.0TV6 powertrains respectively.
14
2
Share

How is the Piaggio X7 review?

Piaggio X7-250 specific introduction is as follows: 1. Acceleration: The X7 is clearly a city-oriented model with very rapid acceleration, specifically in the commonly used speed range of 0-80 km/h where its acceleration is particularly impressive. The 5000-6000 rpm range is a very comfortable working zone, roughly translating to speeds of 50-80 km/h. 2. Stability: The X7 offers excellent driving stability. Even with hands off the handlebars, it can maintain a straight path for a considerable distance without the handlebars shaking easily. The standard 760 low seat is quite friendly for riders of shorter stature. 3. Safety assistance features and dashboard: The standard ABS and ASR provide a high level of safety assistance.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.