···
Log in / Register

How to Drive the Roewe i5 Automatic Transmission?

4 Answers
MacJessica
07/23/25 9:02pm
Roewe i5 automatic transmission driving method: Press the brake pedal with your right foot. To move forward, pull the gear lever to the D (Drive) position; to reverse, pull it to the R (Reverse) position. Release the handbrake, slowly release the brake pedal (utilizing inertia for gradual movement), move your right foot to the accelerator pedal, and gently press to proceed. The Roewe i5 is a high-performance internet-connected mid-size sedan under the Roewe brand, equipped with a 1.5L naturally aspirated engine and a 1.5T turbocharged engine, delivering maximum power outputs of 116 horsepower and 169 horsepower, respectively, with peak torques reaching 142 Nm and 250 Nm. It is paired with a 6-speed manual or 7-speed dual-clutch transmission, featuring high-perception configurations such as keyless entry, a 14-key multifunction steering wheel, and all-weather headlights.
Was this review help?
10
3
Share
HaleyDella
08/10/25 4:42pm
Driving the Roewe i5 automatic transmission is actually quite simple. After getting in the car, first adjust the seat position and fasten the seat belt. Press the brake pedal, then push the one-touch start button to ignite the engine. Release the electronic handbrake, and you don't need to worry about the gear as it stays in P. When preparing to start, continue pressing the brake, shift the gear lever to D, and slowly release the brake to move the car. Normally, there's no need to shift gears while driving. When encountering steep slopes, you can switch to S mode for enhanced power. When parking, press the brake, shift to N gear, pull up the electronic handbrake, then shift to P and turn off the engine. A special reminder: never coast downhill in N gear as it can damage the transmission. For new cars, remember to activate the auto-hold function; pressing the brake deeply at red lights will automatically stop the car, making it effortless and safe.
Was this review help?
8
1
Share
Expand All
GabriellaAnn
09/23/25 4:24am
My habit of driving the Roewe i5 automatic transmission is to step on the brake to start the engine first after getting in the car, wait for all the dashboard indicator lights to show normal, then shift to D gear and go. In the city, I hardly need to touch the gear lever; the car moves as much as I press the accelerator. If I want to overtake, I just press the accelerator all the way down, and the transmission will automatically downshift to speed up. This car has an automatic parking function that is particularly useful. When waiting at a red light, a deep press on the brake automatically engages the parking brake. When parking, remember the steps: step on the brake, shift to N gear, pull the electronic handbrake, then push to P gear, and finally turn off the engine. Usually, be careful not to suddenly shift gears while pressing the accelerator, as it can easily damage the transmission. Driving an automatic transmission car is hassle-free, and it's much more comfortable than a manual transmission in long traffic jams.
Was this review help?
18
2
Share
Expand All
ValerieLee
11/06/25 6:40am
The operation of the Roewe i5 automatic transmission is very straightforward: press the brake to start the engine, shift to D gear to begin driving. During driving, gear shifts are completely automatic. When encountering steep slopes or climbing out of underground garages, shifting to S gear provides more power. Always press the brake and shift to P gear when parking, and the electronic parking brake will automatically engage. In economy mode, fuel consumption is lower, making it suitable for daily commuting. Regular checks of the transmission fluid are important.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What to Do If the Car Stalls in Deep Water?

If the car stalls in deep water, do not attempt to restart the vehicle immediately. Instead, call your insurance company and a repair service for assistance. Here is relevant information: 1. Skidding: Driving on waterlogged roads reduces braking efficiency and increases the risk of skidding. Hold the steering wheel firmly with both hands, maintain a straight path and drive at low speed. When turning, apply the brakes gently to prevent wheel lock-up and skidding. 2. Never restart the engine after stalling in water: In such cases, promptly contact an authorized 4S shop for repairs and inform them that the car stalled due to water exposure to avoid engine damage from accidental restart during repairs. Professional 4S shops will use computer diagnostic tools to immediately determine the cause of the stall. Most roadside repair shops lack this advanced diagnostic system.
5
4
Share

Is the thick or thin car air conditioning pipe the high-pressure one?

The thin car air conditioning pipe is the high-pressure pipe, while the thick one is the low-pressure pipe. Below are other methods to distinguish them: 1. High-pressure: Another way to distinguish is that the compressor to the condenser and the condenser to the evaporator box are all high-pressure. 2. Low-pressure: From the evaporator box to the compressor is low-pressure. Below are the steps to replace the air filter: 1. Choose the filter: Select the appropriate filter. 2. Unpack the filter: Open the new filter packaging and check if it is intact and undamaged. 3. Remove the filter: Remove the original car filter. 4. Take off the felt pad: Remove the felt pad covering the air outlet. 5. Open the cover: After removing the felt pad, you will see the rectangular cover of the air filter. Pull the cover to the right to open it. 6. Replace the filter: Take out the old filter and replace it with the new one.
6
2
Share

Does the door light consume power if it stays on?

If the door light stays on, it definitely consumes power, but the amount is not significant. Here is relevant information: 1. Close the car door: The switches for the car doors and windows rely on the battery for power, so it's best to close all windows before turning off the engine, close the doors after turning off the engine, and use the long-press lock button method to secure the doors after leaving the car. 2. Turn off the air conditioning and audio before shutting down the engine: The air conditioning system involves the compressor, blower, and audio, which are high-power electrical devices. Not turning them off before shutting down the engine will place a heavy burden on the battery and cause damage. 3. Avoid leaving the vehicle parked for long periods: The car's battery will automatically discharge during prolonged inactivity. The vehicle should be used regularly to prevent automatic battery discharge issues.
8
5
Share

What Stickers Should Be Displayed on a Car?

Vehicle inspection compliance sticker, vehicle environmental protection sticker, compulsory insurance sticker. The following is relevant information about vehicle stickers: Vehicle inspection compliance sticker: Valid for one year. Vehicle environmental protection sticker: Issued for energy-saving and emission-reduction inspections and regular vehicle environmental protection checks, categorized into yellow and green labels, requiring annual inspection. Compulsory insurance sticker: Currently, vehicles only need to display two stickers: compulsory insurance and annual inspection. The environmental protection sticker has been canceled and merged with the annual inspection sticker. Private vehicles with 6 seats or fewer (including 6 seats) are exempt from on-site inspections for the first 6 years, but must submit compulsory insurance documents to the traffic police department every 2 years to renew the annual inspection sticker. Starting from the 6th year, vehicles must undergo annual inspections until the vehicle reaches 15 years old.
10
0
Share

How to Open the Engine Hood of the Buick Excelle?

The operation to open the engine hood of the Buick Excelle is as follows: Locate the engine hood release lever below the steering wheel on the left side, pull it upwards to release, and then return it to its original position. There is a safety latch in the center front of the vehicle hood. Move the safety latch towards the driver's side of the vehicle and lift the engine hood to open it. When closing the engine hood: First, lower the hood support stand, while using your other hand to hold the hood. Slowly lower it until the hood is about 50mm-60mm from closing, then let it drop freely. You will hear a 'clunk' sound indicating that it is securely locked. If you do not allow the hood to drop freely from this height, it may not close properly. Of course, if you release it from too high, it might cause distress to car owners who cherish their vehicles.
1
4
Share

What is the difference between high-power and low-power engines in cars?

High-power engines and low-power engines differ not only in turbo pressure and control programs, but also in compression ratio, piston shape, and cooling system design. Many turbocharged models utilize both high-power and low-power engines. Relevant details are as follows: 1. Fuel: A car engine uses a mixture of fuel and air as its fuel source. By increasing the intake air volume and correspondingly increasing the fuel injection volume, the amount of fuel in the engine can be increased. With more fuel in the engine, the power output of the car engine can be enhanced. 2. Turbocharger: Turbocharged engines are equipped with a turbocharger, which consists of two parts: a compression turbine and an exhaust turbine. The compression turbine and exhaust turbine are connected by the same shaft, with the compression turbine linked to the engine's intake manifold and the exhaust turbine connected to the engine's exhaust manifold.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.