How to Drive the Binyue Fuel-Efficiently?
4 Answers
If you want to drive the Binyue in a fuel-efficient manner, you should keep the engine within a reasonable RPM range, avoid unnecessary overtaking, and drive on relatively smooth roads. Below is additional information about the Binyue: 1. The Binyue is a compact SUV under the Geely brand, equipped with two engines: a 1.0-liter turbocharged engine and a 1.5-liter turbocharged engine. 2. The 1.0-liter turbocharged engine delivers 136 horsepower and a maximum torque of 205 Nm, with a maximum power output at 6000 RPM and peak torque between 2000 and 3000 RPM. This engine features DVVT technology, direct fuel injection, and an aluminum cylinder head. 3. The 1.5-liter turbocharged engine produces 177 horsepower and a maximum torque of 255 Nm, achieving peak power at 5500 RPM and maximum torque between 1500 and 4000 RPM. This engine also incorporates DVVT technology and an aluminum cylinder head.
To save fuel with the Bin Yue, I believe the most important thing is to develop smooth driving habits. When I drive, I pay special attention to avoiding sudden acceleration and hard braking, as these actions make the engine consume more fuel. I always press the accelerator gently, maintaining a steady speed between 60 to 80 kilometers per hour, which is particularly effective on city roads. Additionally, reducing unnecessary load is crucial—for example, avoiding piling too many items in the trunk. I take the opportunity to clean it out every time I wash the car. In the summer when using the air conditioning, I first open the windows for a few minutes to ventilate the car before turning on the AC. This reduces the engine's burden and naturally lowers fuel consumption. Regularly checking tire pressure is also important, as underinflated tires increase rolling resistance. I check mine once a month to ensure they are within the recommended range. In short, saving fuel comes down to attentiveness and habits. Driving gently not only saves fuel but is also safer.
As someone who frequently commutes by car, I've figured out a few fuel-saving tips for driving the Bin Yue. When starting the vehicle, avoid slamming the accelerator; a gentle start can save a significant amount of fuel—I usually keep the RPM under 2000. On the highway, I prefer using the cruise control feature, which automatically maintains a steady speed, avoiding fluctuations and significantly reducing fuel consumption. In daily driving, I also pay attention to minimizing idle time; for example, if I'm waiting in a parking lot for more than 30 seconds, I turn off the engine. Additionally, using the air conditioning wisely is important—I typically set the temperature around 24°C with moderate fan speed, rather than cranking it up to the maximum. Regular maintenance is a must; every time I change the oil, I make sure to use genuine products to keep the engine running efficiently. These small actions may seem simple, but they add up to noticeable savings on fuel costs.
To save fuel with the Bin Yue, I've personally practiced it, and the key is to control the throttle and brakes properly. Don't accelerate too aggressively at startup; smooth acceleration is enough—I just lightly press the throttle when driving. Once the speed is stable, try to avoid lane changes and overtaking, as frequent acceleration and braking consume a lot of fuel. I also adjust based on road conditions: using eco mode in city traffic and cruise control in suburban areas, which helps a lot. I check tire pressure monthly and refill if it's low. Don't keep the AC on high cooling all the time; turning it on only when it's hot saves some fuel. Also, keep the trunk light and avoid carrying unnecessary items.
