···
Log in / Register

How to Drive Straight in the Rain for Subject Three of the Driving Test?

4 Answers
SanGage
07/29/25 5:41pm

When driving in the rain, the road surface is slippery and visibility is poor, which often leads to directional deviation or difficulty in shifting gears when driving straight. You can refer to the following methods: 1. Vision: Look far and take care of the near. You should look a bit farther ahead while also paying attention to the nearby and rear conditions of the vehicle. Since the speed in Subject Three is fast, looking far ahead allows you to detect situations in advance and react accordingly, making it easier for the vehicle to drive straight. 2. Choose a reference point: You can select the curb or a row of roadside trees to keep the car parallel to them. 3. Steering wheel operation: The steering wheel is mainly operated with the left hand, while the right hand switches between the steering wheel and the gear lever. Hold the steering wheel steadily and straight, and avoid changing direction easily while driving. Adjust according to changes in speed, avoid sudden turns, and make fine adjustments with appropriate force.

Was this review help?
3
2
Share
JulietteRose
08/14/25 9:08am

As a seasoned driver with years of experience, the key to passing the straight-line driving test in rainy conditions during the third driving test is maintaining a relaxed mindset and controlling your speed. I recommend keeping your speed below 30 kilometers per hour, as rain makes the road slippery, and going too fast can lead to skidding or hydroplaning. Hold the steering wheel lightly, avoiding forceful turns, and gently adjust along the road markings. Keep your eyes on distant landmarks to stay focused. Turn the windshield wipers to the highest setting to prevent blurred vision, and if fogging occurs, use the air conditioning to dehumidify. The examiner will assess your ability to control the vehicle steadily, so brake early with gentle taps to avoid sudden stops that could cause fishtailing. Check tire pressure and wiper functionality beforehand, and practice adapting to slippery conditions. Remember, slow and steady is safest—panic can easily lead to veering off course.

Was this review help?
18
4
Share
Expand All
CarolineAnn
10/13/25 8:29am

Just passed the driving test (Subject 3) in the rain. I was nervous but followed my experience: kept speed at 25-30km/h, focused eyes on the lane divider to guide the car straight, avoided looking around. Held the steering wheel lightly, made minor adjustments when feeling slight drift, avoided big movements. When rain got heavy, quickly turned wipers to high speed, opened windows slightly or used AC defogger to ensure clear visibility. During the test, the examiner watched vehicle control closely - I maintained steady movement without wobbling, braked gently and gradually to avoid sudden stops. Before starting, took deep breaths to relax, checked vehicle conditions like wiper effectiveness and tire grip. Wet roads have poor friction, making cars prone to drifting - stayed focused on road markings. Keeping straight isn't that hard with more rainy condition practice tests.

Was this review help?
2
4
Share
Expand All
VanMary
11/27/25 2:41am

Having driven for a while, I suggest keeping it simple for the straight-line test on rainy days: slow down to 20-30 km/h, relax your grip on the steering wheel, and the car will naturally follow the lane markings. Avoid sharp turns or sudden braking on slippery wet roads—use gentle taps on the brake to assist with slowing down. Turn on the wipers and defogger promptly to ensure clear visibility. The examiner mainly checks for stability, so just prevent the car from drifting out of the lane. Get accustomed to driving in the rain to minimize the risk of skidding.

Was this review help?
14
4
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on a Changan Suzuki SX4?

The method to reset the maintenance light on a Changan Suzuki SX4 is as follows: 1. Insert the car key and start the vehicle; 2. Rotate the left knob on the center console until the maintenance reminder light starts flashing; 3. Press the left knob and stop rotating when you hear a beep, at which point the maintenance reminder light on the dashboard will reset. The Changan Suzuki SX4 is a compact sedan equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 109 PS and a maximum torque of 144 Nm. The car's dimensions are 4135mm in length, 1755mm in width, and 1605mm in height, with a wheelbase of 2500mm, and it comes with a 5-speed manual transmission.
11
4
Share

Where to Add Windshield Washer Fluid in the Lamando?

The windshield washer fluid reservoir in the Lamando is located next to the engine. On the left side of the engine compartment, there is a small blue-capped container with a windshield spray symbol on its lid - this is the washer fluid reservoir. Simply open it and pour in the windshield washer fluid. Windshield washer fluid, commonly known as car windshield cleaning liquid, is a consumable automotive product. It serves as a specialized liquid for cleaning vehicle windshields, offering functions such as cleaning, anti-fogging, anti-static, lubrication, and corrosion prevention. The Lamando is a compact car under SAIC Volkswagen, with dimensions of 4599mm in length, 1826mm in width, and 1425mm in height, and a wheelbase of 2656mm. It is equipped with either EA888 TSI or EA211 TSI engines and uses a wet 7-speed dual-clutch transmission.
5
0
Share

How Much Battery Repair Fluid Is Most Appropriate to Add?

Adding 8 to 10ML of battery repair fluid is quite appropriate. Scope of Application for Battery Repair Fluid: Some failed batteries can be repaired by adding repair fluid, while others with severe issues may need to be scrapped. According to the national standard for electric vehicle batteries (JB/T10262-2001), batteries with a capacity below 70% of the nominal capacity are considered failed. Introduction to Battery Repair Fluid: Battery repair fluid, also known as lead-acid battery repair fluid, battery activator, or battery capacity enhancer, is a solution added to failed electric vehicle batteries. It can restore battery capacity, extend battery life, and improve various battery performances. It does not require professional repair equipment and is simple and easy to operate. Due to the different compositions of repair fluids, their repair effects also vary.
16
5
Share

What is the name of the block behind the parking space?

The block behind the parking space is called a wheel stopper. Introduction to rubber wheel stoppers: Rubber wheel stoppers, also known as wheel chocks, reverse pads, stoppers, or parking blocks, are made from high-strength natural rubber through vulcanization and high-pressure synthesis. They have excellent compression resistance and a certain degree of softness in the slope. Function of rubber wheel stoppers: Rubber wheel stoppers are mainly used in parking lots and garages to ensure accurate and orderly parking, reduce vibrations, and prevent collisions. They are suitable for underground parking lots and are commonly used in large public parking lots, residential garages or underground parking lots, dedicated parking spaces in factories or units, and open parking spaces. Their purpose is to prevent collisions between vehicles or between vehicles and other objects during parking.
7
5
Share

Is Battery Depletion Covered Under Warranty?

Battery depletion is covered under warranty. Battery Introduction: A battery is a type of cell, also known as a storage battery, which works by converting chemical energy into electrical energy. The common battery refers to a lead-acid battery, mainly composed of lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. Battery Working Principle: It uses a lead plate filled with sponge-like lead as the negative electrode, a lead plate filled with lead dioxide as the positive electrode, and a 22-28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead acts as the negative electrode, undergoing oxidation to form lead sulfate; lead dioxide acts as the positive electrode, undergoing reduction to also form lead sulfate.
8
3
Share

How to use the dashcam on Mercedes-Benz E300L?

Press the power ON/OFF button or connect the charger, the dashcam will automatically enter the recording mode and start recording, with the blue indicator light flashing. After powering on, press the MODE key to select and enter the photo mode, then press REC/SNAP to take photos. Press the MENU key to enter the submenu. After powering on, press the MODE key to select and enter the preview mode, press UP or DOWN to select video or photo files, and press MODE to exit preview. Press once to rotate the screen, press twice to enter screensaver mode, and press again to return to normal state. In playback mode, press the menu key to delete the interface, then press the recording key to enter the selection interface for deleting "single/all/selected", and press the REC key to delete.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.