How to Drive Over Speed Bumps?

1 Answers
VanessaFitz
07/25/25 1:26am
Methods for driving over speed bumps: 1. Observe the road conditions ahead in advance, especially when the vehicle has entered a speed-limited section. Reduce speed and apply linear braking upon spotting a speed bump to slow down beforehand, maintaining a speed of approximately 10 to 20 km/h; 2. Having both left and right wheels contact the speed bump simultaneously can distribute the impact force evenly across both wheels, balancing the load on the suspension systems on both sides and minimizing damage to the greatest extent; 3. Release the brakes before the wheels are about to pass over the speed bump. This shifts the vehicle's center of gravity backward, relieving the load on the front shock absorbers and allowing them to be in optimal condition to absorb the impact of the speed bump.
Was this review help?
7
5
Share
More Forum Discussions

How many liters of fuel are needed for 300 kilometers?

"Cars with 1.0, 1.3, 1.6, and 2.0 displacement engines require approximately 16.7L, 23.3L, 33.3L, and 40L of fuel to travel 300 kilometers. Fuel consumption may vary depending on road conditions, driving habits, and the quality of engine oil. The specific influencing factors are as follows: Road conditions: Changes in road conditions also affect fuel consumption. Poor road conditions can lead to higher fuel consumption. Driving habits: Driving habits are another hidden factor. Smooth starts and linear acceleration are more fuel-efficient, while aggressive driving behaviors such as rapid acceleration, frequent braking, frequent starts, and unnecessary revving consume more fuel. Engine oil quality: Poor-quality engine oil can lead to insufficient lubrication, increasing the engine's workload. This requires burning more gasoline to achieve the same level of performance."
15
1
Share

Where is the rearview mirror heating for Nissan Teana?

Nissan Teana's rearview mirror heating does not have an independent switch. It is located on the air conditioning panel and shares the same button with the rear windshield defogger, activating simultaneously. During rainy or snowy weather, when the driver turns on the rearview mirror heating function, the heating element will quickly warm up to a fixed temperature within minutes, typically between 35 to 60 degrees Celsius. This effectively heats the mirror, removing fog and frost, providing great convenience for the driver. The Nissan Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand, with body dimensions of 4850mm in length, 1795mm in width, and 1475mm in height. In terms of exterior design, the Teana features a one-piece bumper with an arc that rises from both sides to the outer edges of the headlights, then extends naturally from the edges of the headlights to form a smooth waistline that runs from front to rear. Paired with a rounded arc roof, the design is natural, fluid, dynamic, and exudes elegance.
18
3
Share

How to Set the Automatic Tilting of Rearview Mirror When Reversing for Mercedes-Benz E-Class?

There are five steps to set the automatic tilting of the rearview mirror when reversing for Mercedes-Benz: 1. Step on the brake and shift into reverse gear. 2. Press the right rearview mirror adjustment button (the button light will turn on). 3. Adjust the tilting angle of the rearview mirror using the cross-shaped directional buttons (up, down, left, right). 4. Wait for 5 seconds, then shift back to N (Neutral) or P (Park) gear. 5. After this, whenever you shift into reverse gear, the right rearview mirror will automatically tilt to the set angle. More relevant information is as follows: Before reversing, press the left rearview mirror adjustment button (the button light will turn on). At this time, if you shift into R (Reverse) gear, the right rearview mirror will not tilt. Press the right rearview mirror button again, and the right rearview mirror will then automatically tilt.
3
4
Share

How to Remove the Wrench Icon on Volkswagen Bora?

Method to remove the wrench icon on Volkswagen Bora: First, turn off the ignition. Press and hold the 0.0 button at the bottom right corner with your left hand, then turn on the ignition with your right hand (do not start the engine, and keep holding the button with your left hand). At this point, a non-flashing wrench symbol will appear on the dashboard. Release the left hand and press the button at the bottom left corner once, and the wrench symbol will disappear. Here’s some information about the wrench icon: 1. The "wrench" alert is designed to remind the owner to perform scheduled maintenance based on mileage, featuring a maintenance reminder function. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle upkeep. Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
12
3
Share

How many kilometers should the Qashqai's transmission oil be changed?

The transmission oil of the Qashqai should be changed after the vehicle has been driven for more than 60,000 kilometers. The specific replacement cycle for the transmission oil can be referred to in the vehicle's maintenance manual. Transmission oil is a lubricant that keeps the gear system clean, lubricates and extends the life of the transmission components, and provides effective lubrication even at low temperatures. The following are the potential hazards of not changing the transmission oil for a long time: 1. Deterioration and evaporation under high-speed and high-temperature conditions: Transmission oil can deteriorate and evaporate when exposed to prolonged high-speed and high-temperature conditions, which can accelerate the wear of mechanical components and, in severe cases, damage internal transmission parts. 2. Weak acceleration when the car is cold: If the transmission oil is not changed for a long time, the car may experience weak acceleration when starting cold. 3. Thickening of transmission oil, which can block the transmission cooler: This can lead to overheating of the transmission oil, increasing wear. 4. Slight slipping during driving: Failure to change the transmission oil on time can result in slight slipping and other similar phenomena while driving.
13
1
Share

Which has a lower failure rate, the Geely Vision X3 or the Chery Tiggo 3X?

Compared to the Chery Tiggo 3X, the Geely Vision X3 has a lower failure rate. Below are the specific differences between the Geely Vision X3 and the Chery Tiggo 3X: 1. Powertrain: The Tiggo 3X is equipped with a 1.5L engine and a CVT transmission (simulating 9 gears), producing 116 horsepower, with a maximum power of 85KW and a maximum torque of 143Nm. Its official combined fuel consumption is 6.8L/100km. The Vision X3 is also equipped with a 1.5L engine and a CVT transmission, producing 109 horsepower, with a maximum power of 80KW and a maximum torque of 142Nm. Its official combined fuel consumption is 6.1L/100km. 2. Features: The Tiggo 3X's distinct features include 17-inch wheels, tire pressure display, auto hold, seat heating, 4 speakers, and LED lights. The Vision X3's distinct features include 16-inch wheels, tire pressure warning, a dashcam, 6 speakers, halogen lights, and anti-pinch power windows.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.